zha-device-handlers: [BUG] Curtain motor _TZE200_r0jdjrvi has no entities

Describe the bug Curtain motor has no entities.

Expected behavior Entities for opening and closing curtain and if possible slider to set partially closed

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0051",
      "in_clusters": [
        "0x0000",
        "0x0004",
        "0x0005",
        "0xef00"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "242": {
      "profile_id": 41440,
      "device_type": "0x0061",
      "in_clusters": [],
      "out_clusters": [
        "0x0021"
      ]
    }
  },
  "manufacturer": "_TZE200_r0jdjrvi",
  "model": "TS0601",
  "class": "zigpy.device.Device"
}

{
  "home_assistant": {
    "installation_type": "Home Assistant OS",
    "version": "2022.11.4",
    "dev": false,
    "hassio": true,
    "virtualenv": false,
    "python_version": "3.10.7",
    "docker": true,
    "arch": "x86_64",
    "timezone": "Europe/Berlin",
    "os_name": "Linux",
    "os_version": "5.15.74",
    "supervisor": "2022.10.2",
    "host_os": "Home Assistant OS 9.3",
    "docker_version": "20.10.18",
    "chassis": "vm",
    "run_as_root": true
  },
  "custom_components": {},
  "integration_manifest": {
    "domain": "zha",
    "name": "Zigbee Home Automation",
    "config_flow": true,
    "documentation": "https://www.home-assistant.io/integrations/zha",
    "requirements": [
      "bellows==0.34.2",
      "pyserial==3.5",
      "pyserial-asyncio==0.6",
      "zha-quirks==0.0.86",
      "zigpy-deconz==0.19.0",
      "zigpy==0.51.5",
      "zigpy-xbee==0.16.2",
      "zigpy-zigate==0.10.3",
      "zigpy-znp==0.9.1"
    ],
    "usb": [
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*2652*",
        "known_devices": [
          "slae.sh cc2652rb stick"
        ]
      },
      {
        "vid": "1A86",
        "pid": "55D4",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus v2"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*zigstar*",
        "known_devices": [
          "ZigStar Coordinators"
        ]
      },
      {
        "vid": "1CF1",
        "pid": "0030",
        "description": "*conbee*",
        "known_devices": [
          "Conbee II"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8A2A",
        "description": "*zigbee*",
        "known_devices": [
          "Nortek HUSBZB-1"
        ]
      },
      {
        "vid": "0403",
        "pid": "6015",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate+"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8B34",
        "description": "*bv 2010/10*",
        "known_devices": [
          "Bitron Video AV2010/10"
        ]
      }
    ],
    "codeowners": [
      "@dmulcahey",
      "@adminiuga",
      "@puddly"
    ],
    "zeroconf": [
      {
        "type": "_esphomelib._tcp.local.",
        "name": "tube*"
      },
      {
        "type": "_zigate-zigbee-gateway._tcp.local.",
        "name": "*zigate*"
      },
      {
        "type": "_zigstar_gw._tcp.local.",
        "name": "*zigstar*"
      }
    ],
    "dependencies": [
      "file_upload"
    ],
    "after_dependencies": [
      "onboarding",
      "usb",
      "zeroconf"
    ],
    "iot_class": "local_polling",
    "loggers": [
      "aiosqlite",
      "bellows",
      "crccheck",
      "pure_pcapy3",
      "zhaquirks",
      "zigpy",
      "zigpy_deconz",
      "zigpy_xbee",
      "zigpy_zigate",
      "zigpy_znp"
    ],
    "is_built_in": true
  },
  "data": {
    "ieee": "**REDACTED**",
    "nwk": 46434,
    "manufacturer": "_TZE200_r0jdjrvi",
    "model": "TS0601",
    "name": "_TZE200_r0jdjrvi TS0601",
    "quirk_applied": false,
    "quirk_class": "zigpy.device.Device",
    "manufacturer_code": 4417,
    "power_source": "Mains",
    "lqi": 28,
    "rssi": null,
    "last_seen": "2022-11-22T00:55:09",
    "available": true,
    "device_type": "Router",
    "signature": {
      "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
      "endpoints": {
        "1": {
          "profile_id": 260,
          "device_type": "0x0051",
          "in_clusters": [
            "0x0000",
            "0x0004",
            "0x0005",
            "0xef00"
          ],
          "out_clusters": [
            "0x000a",
            "0x0019"
          ]
        },
        "242": {
          "profile_id": 41440,
          "device_type": "0x0061",
          "in_clusters": [],
          "out_clusters": [
            "0x0021"
          ]
        }
      }
    },
    "active_coordinator": false,
    "entities": [],
    "neighbors": [],
    "endpoint_names": [
      {
        "name": "SMART_PLUG"
      },
      {
        "name": "unknown 97 device_type of 0xa1e0 profile id"
      }
    ],
    "user_given_name": null,
    "device_reg_id": "b43e549ed833f2c0c88589cb86a72fa1",
    "area_id": "schlafzimmer",
    "cluster_details": {
      "1": {
        "device_type": {
          "name": "SMART_PLUG",
          "id": 81
        },
        "profile_id": 260,
        "in_clusters": {
          "0x0004": {
            "endpoint_attribute": "groups",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x0005": {
            "endpoint_attribute": "scenes",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0xef00": {
            "endpoint_attribute": null,
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x0000": {
            "endpoint_attribute": "basic",
            "attributes": {
              "0x0001": {
                "attribute_name": "app_version",
                "value": 70
              },
              "0x0004": {
                "attribute_name": "manufacturer",
                "value": "_TZE200_r0jdjrvi"
              },
              "0x0005": {
                "attribute_name": "model",
                "value": "TS0601"
              }
            },
            "unsupported_attributes": {}
          }
        },
        "out_clusters": {
          "0x0019": {
            "endpoint_attribute": "ota",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x000a": {
            "endpoint_attribute": "time",
            "attributes": {},
            "unsupported_attributes": {}
          }
        }
      },
      "242": {
        "device_type": {
          "name": "unknown",
          "id": 97
        },
        "profile_id": 41440,
        "in_clusters": {},
        "out_clusters": {
          "0x0021": {
            "endpoint_attribute": "green_power",
            "attributes": {},
            "unsupported_attributes": {}
          }
        }
      }
    }
  }
}

According to https://github.com/zigpy/zha-device-handlers/issues/1602#issuecomment-1322763054 its already fixed.

About this issue

Original URL
State: open
Created 2 years ago
Comments: 60 (1 by maintainers)

Most upvoted comments

Got it working again. By comparing the old Logs with new ones i found that with the removal of specified “TuyaDPType.ENUM” commands are now 4 byte(int32) instead of 1 byte and the motor is ignoring the trailing bytes to the command. As i did not find a way to shorten the command to 1 byte, i simply moved the command in the first byte of the int32.

I would call this a hackfix:

TUYA2ZB_COMMANDS = {
    0x0000: 0x00000000, #Open
    0x0001: 0x02000000, #Close
    0x0002: 0x01000000, #Stop
}

Is there a simple way to reverse the displayed lift percentage?

caradas on Mar 17, 2023

Is expected that lift_percentage would be updated.

I can confirm that lift_percantage is now showing up and updating correctly after the curtain moved.

switch ON - switch OFF (motor starts runnik CW) switch OFF - (motor stops) Up - error occurs Stop - error occurs Down - error occurs

I can’t confirm that. The Switch entity does nothing for me.

caradas on Nov 27, 2022

Hello, guys. I was having problem pairing and using a similar model curtain motor. But the the quirk file that @danidask posted on his last comment worked like a charm. I just had to change TZE200 to TZE204 on line 261, because my motor model is _TZE204_r0jdjrvi. The one thing that still isn’t working is the curtain state whenever i use the set_position service (either by calling it manually or by selecting the appropriate position on the scroller in the UI). If click on the half of the bar (50%) and the curtain goes to that position, the state of the curtain keeps on “Opening” forever. I have to click the Stop button for the state to change to Open. The same thing happens with the Closing state. Is there a way to fix this?

Hi @utech-git We have the same model (_TZE204_r0jdjrvi) and have encountered the same issue. I don’t use rails and the only solution I have found is to set limits by forcing the motor to stop. However, I have to do this every time after a power outage because the motor forgets the limits. Have you found any other solution to set the limits?

Well, every time after a power outage it loses the limits. But I don’t do anything to get the limits back. Once the power is back, the first time I open the curtain it goes slowly to the beggining of the rail and when it reachs it automatically knows where the start limit is. The same way when I first close the curtain, it goes to the end of the rail and set the finish limit. And there it goes.

It knows where the end/beggining is when it feels resistance and can’t go any further (just like you said when you force the motor to stop).

Thank you for your response. In my situation, I have vertical curtains that do not have a physical limit when they are lowered, so I need to force them to stop. I was wondering if it is possible to save the limits in Home Assistant or somewhere else, so that they can be uploaded in case of a power outage.

KirkKirk on Oct 27, 2023

Take the power of the device and wait one minute and putting it back and look if some interesting DPs is s coning in the log.

MattWestb on Feb 20, 2023