zephyr: Zephyr 3.7 RC2 BLE on STM32 Nucleo WB55 does not work
Describe the bug I am using Zephyr 3.7 RC2 but the issue is vissible also with 3.7 RC1. I am trying if everything still works for the STM32WB55 device. I am using STM32 Nucleo WB55. I checked radio firmware stm32wb5x_BLE_HCILayer_fw.bin in version 1.18.0 from STM32WB Copro Wireless Binaries. The issue is visible with the radio version 1.19.1 and also with the firmware file stm32wb5x_BLE_HCILayer_extended_fw.bin. Demos with BLE do not work on STM32 Nucleo WB55. I have also my own application but also demo iBeacon does not work.
The issue seems coming from the bt_ipm_ble_init function.
It was working with Zephyr 3.4 when I last checked.
To Reproduce Have radio firmware loaded with radio fw. Build the “zephyr/samples/bluetooth/ibeacon” demo for -DBOARD=nucleo_wb55rg flash and run.
Expected behavior Working demo and visible iBeacon node on BLE scanner.
Impact BLE on STM32 Nucleo WB55 does not work.
Logs and console output When I read the log I got the below report:
*** Booting Zephyr OS build v3.7.0-rc1-588-g40810983ead2 ***
Starting iBeacon Demo
E: ***** USAGE FAULT *****
E: Illegal use of the EPSR
E: r0/a1: 0x080094f4 r1/a2: 0x20002ac8 r2/a3: 0x00080000
E: r3/a4: 0x00000000 r12/ip: 0x20000224 r14/lr: 0x080035b1
E: xpsr: 0x20000000
E: Faulting instruction address (r15/pc): 0x00000000
E: >>> ZEPHYR FATAL ERROR 35: Unknown error on CPU 0
E: Current thread: 0x20000490 (unknown)
E: Halting system
Environment (please complete the following information): Linux Debian 11 CMake version: 3.21.0 Zephyr version: 3.7.0-rc2 west 1.2.0 host-tools: zephyr 0.16.1 toolchain: zephyr 0.16.1
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Comments: 18 (17 by maintainers)
Commits related to this issue
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Implementing HCI setup function to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <aless... — committed to asm5878/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Enabling BT_HCI_SETUP for STM32WB55 to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <a... — committed to asm5878/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Enabling BT_HCI_SETUP for STM32WB55 to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <a... — committed to zephyrproject-rtos/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Implementing HCI setup function to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <aless... — committed to zephyrproject-rtos/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Enabling BT_HCI_SETUP for STM32WB55 to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <a... — committed to zephyrproject-rtos/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Implementing HCI setup function to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <aless... — committed to tmleman/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Implementing HCI setup function to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <aless... — committed to zephyrproject-rtos/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Enabling BT_HCI_SETUP for STM32WB55 to have a correct and proper initialization procedure to fix #75318 issue Signed-off-by: Alessandro Manganaro <a... — committed to zephyrproject-rtos/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Implementing HCI setup function to have a correct and proper initialization procedure to fix #75318 issue (cherry picked from commit 7ca2072ed08c1d8... — committed to Chenhongren/zephyr by asm5878 2 years ago
- drivers: bluetooth: hci: Fix stm32wb BLE behavior Enabling BT_HCI_SETUP for STM32WB55 to have a correct and proper initialization procedure to fix #75318 issue (cherry picked from commit 4fc77248de9... — committed to Chenhongren/zephyr by asm5878 2 years ago
Thanks to @JoeGitST we have identified the commit causing the regression: 501e7158a8a0d270b032d7b672b313aa8af6d54e
Investigation is on going
@FRASTM we have a potential fix. Unlocking the regression but with warning/errors. I will check directly and I’ll let you know
Hello @jhedberg, I was off for a couple of days. We will try our best (according our current priorities) to offer a solution ASAP.
Thanks for your precious feedback
@asm5878 @erwango are you able to submit a fix based on my feedback? The fix itself should be fairly quick & simple but at least I’m not able create it as I’m on vacation this and next week. For the fix to make it to 3.7 it needs to be submitted latest today (two days review time and rc3 is coming on Friday).
@asm5878 also, this is not the first HCI driver to have such a bug, take a look e.g. at #73711 for a recent similar fix.
@asm5878 the exact failure is probably simply that the driver hasn’t yet set its
hci->recvcallback pointer before it attempts to send HCI commands (recv()is needed to pass the command completion events to the host), however even if you fixed that it’s not right for the driver to call any HCI command APIs fromopen()rather those should be moved intosetup().@asm5878 I took a quick look at the driver code, and it seems like the core issue is likely that the driver attempts to send HCI commands inside
bt_ipm_open(). No driver should do that, since from the perspective of the host (which owns thebt_hci_cmd_send*()APIs) the HCI transport is functional only after the drivers’sopen()callback has successfully returned. What the driver should instead do is to implement asetup()callback (which gets called by the host immediately afteropen()) and perform any HCI command sending from within that callback instead.@ajarmouni-st As I mentioned in bug description I tried stm32wb5x_BLE_HCILayer_fw.bin and stm32wb5x_BLE_HCILayer_extended_fw.bin from packages in version 1.18.0 and 1.19.1. Both firmwares are HCI only. Firmware 1.18.0 works with Zephyr 3.4 (our current base which we want to migrate to new version).