zephyr: Mesh Bluetooth Sample not working with P-NUCLEO-WB55RG

Running the samples/bluetooth/mesh in P-NUCLEO-WB55RG fails with Failed to start advertiser error I am trying to run the samples/bluetooth/mesh on a P-NUCLEO-WB55RG using the latest Zephyr 0.13 without modifying any of the configuration option but the P-NUCLEO-WB55RG advertises itself and disconnect disconnect every few seconds with the error Failed to start advertiser

To Reproduce Steps to reproduce the behavior:

1. cd zephyr
2. west build -p auto -b nucleo_wb55rg samples/bluetooth/mesh
3. west flash

Expected behavior The P-Nucleo-WB55rg should advertise successfully and get detected by nRF Mesh application

Impact Can’t run mesh application on STM32WBCG and STM32WBRG micro-controllers

Logs and console output

*** Booting Zephyr OS build zephyr-v2.6.0-2332-gc910138adec2  ***
Initializing...
Bluetooth initialized
Mesh initialized
[00:00:00.346,000] <inf> fs_nvs: 3 Sectors of 4096 bytes
[00:00:00.346,000] <inf> fs_nvs: alloc wra: 0, fd0
[00:00:00.346,000] <inf> fs_nvs: data wra: 0, 20
[00:00:00.364,000] <inf> bt_hci_core: No ID address. App must call settings_load()
[00:00:00.367,000] <inf> bt_hci_core: Identity: 80:E1:26:1B:69:79 (public)
[00:00:00.367,000] <inf> bt_hci_core: HCI: version 5.0 (0x09) revision 0x0026, manufacturer 0x0030
[00:00:00.367,000] <inf> bt_hci_core: LMP: version 5.0 (0x09) subver 0x2126
[00:00:00.367,000] <inf> bt_mesh_prov_device: Device UUID: 00000000-2a00-2e00-1050-4e5457323220
[00:00:00.378,000] <wrn> bt_hci_core: opcode 0x200a status 0x86
[00:00:00.378,000] <err> bt_adv: Failed to start advertiser
[00:00:00.389,000] <wrn> bt_hci_core: opcode 0x200a status 0x85
[00:00:00.389,000] <err> bt_adv: Failed to start advertiser
[00:00:00.389,000] <err> bt_mesh_adv_legacy: Advertising failed: err -5
[00:00:05.390,000] <wrn> bt_hci_core: opcode 0x200a status 0x85
[00:00:05.390,000] <err> bt_adv: Failed to start advertiser
[00:00:05.390,000] <err> bt_mesh_adv_legacy: Advertising failed: err -5

Environment (please complete the following information):

• OS: Linux
• Toolchain: Zephyr SDK
• Version: 0.13

Additional context When scanning for the node using nRF Connect application, it shows momentary and disappear when trying to add it as a node. The issue keeps repeating every few seconds.