zephyr: ci: samples/drivers/counter/alarm/sample.drivers.counter.alarm build is failing on sam_e70_xplained/same70q21
To Reproduce
west build -p -b sam_e70_xplained/same70q21 samples/drivers/counter/alarm -T sample.drivers.counter.alarm
Logs and console output
-- west build: making build dir ~/zephyrproject/zephyr/build pristine
-- west build: generating a build system
Loading Zephyr default modules (Zephyr base).
-- Application: ~/zephyrproject/zephyr/samples/drivers/counter/alarm
-- CMake version: 3.22.1
-- Found Python3:~/zephyrproject/.venv/bin/python3 (found suitable version "3.10.12", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: ~/.cache/zephyr
-- Zephyr version: 3.6.99 (~/zephyrproject/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: sam_e70_xplained, qualifiers: same70q21
-- ZEPHYR_TOOLCHAIN_VARIANT not set, trying to locate Zephyr SDK
-- Found host-tools: zephyr 0.16.5 (~/zephyr-sdk-0.16.5)
-- Found toolchain: zephyr 0.16.5 (~/zephyr-sdk-0.16.5)
-- Found Dtc: ~/zephyr-sdk-0.16.5/sysroots/x86_64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6")
-- Found BOARD.dts: ~/zephyrproject/zephyr/boards/atmel/sam/sam_e70_xplained/sam_e70_xplained_same70q21.dts
-- Found devicetree overlay: ~/zephyrproject/zephyr/samples/drivers/counter/alarm/boards/sam_e70_xplained_same70q21.overlay
devicetree error: 'clk' appears in /soc/tc@4000c000 in ~/zephyrproject/zephyr/build/zephyr/zephyr.dts.pre, but is not declared in 'properties:' in ~/zephyrproject/zephyr/dts/bindings/sensor/atmel,sam-tc-qdec.yaml
-- In: ~/zephyrproject/zephyr/build/zephyr, command: ~/zephyrproject/.venv/bin/python3;~/zephyrproject/zephyr/scripts/dts/gen_defines.py;--dts;~/zephyrproject/zephyr/build/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-unique_unit_address_if_enabled';--bindings-dirs;~/zephyrproject/zephyr/dts/bindings;--header-out;~/zephyrproject/zephyr/build/zephyr/include/generated/devicetree_generated.h.new;--dts-out;~/zephyrproject/zephyr/build/zephyr/zephyr.dts.new;--edt-pickle-out;~/zephyrproject/zephyr/build/zephyr/edt.pickle;--vendor-prefixes;~/zephyrproject/zephyr/dts/bindings/vendor-prefixes.txt
CMake Error at ~/zephyrproject/zephyr/cmake/modules/dts.cmake:295 (message):
gen_defines.py failed with return code: 1
Call Stack (most recent call first):
~/zephyrproject/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
~/zephyrproject/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
~/zephyrproject/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
CMakeLists.txt:4 (find_package)
-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: /usr/bin/cmake -DWEST_PYTHON=~/zephyrproject/.venv/bin/python3 -B~/zephyrproject/zephyr/build -GNinja -DBOARD=sam_e70_xplained/same70q21 -S~/zephyrproject/zephyr/samples/drivers/counter/alarm
Impact blocking CI in https://github.com/zephyrproject-rtos/zephyr/pull/71208
Environment main 731f8d473610f04ec3d0cf53cb10dd373b467f31
About this issue
- Original URL
- State: closed
- Created 3 years ago
- Comments: 15 (15 by maintainers)
Commits related to this issue
- drivers: counter: sam: Add qdec as tc special mode The current atmel,sam-tc-qdec sensor implementation shared the timer counter node. This create issues when users wants define both modes. The curren... — committed to nandojve/zephyr by nandojve 2 years ago
- drivers: counter: sam: Add qdec as tc special mode The current atmel,sam-tc-qdec sensor implementation shared the timer counter node. This create issues when users wants define both modes. The curren... — committed to Passw/zephyrproject-rtos-zephyr by nandojve 2 years ago
The timer controller can run in
sam-tcmode or insam-tc-qdecmode. depending on usage we load the correct driver. default mode issam-tc-qdec, thus loading thesam-tc-qdecdriver.so, for the alarm-sample-example mentioned above we need the
sam-tcmode.suggestion: we update the
samples/drivers/counter/alarm/boards/sam_e70_xplained_same70q21.overlaythat should do?
btw. accordingly we should also update
sam_e70_xplained_same70q21b.overlayand...samv71q21.overlay,... samv71q21b.overlayand probably also
sam_v71_xult_samv71q21.overlayandsam_v71_xult_samv71q21b.overlayoverwriting the DTS to meet the actual needs is great, we should use it here. there is actually no need to necessarily change the default behaviour.