xpipe: Unable to add PFSense

Hi,

I’m struggling to add PFsense as a connection. When remoting on to it you don’t get a shell but rather a menu system. Any ideas how I can add this?

Here’s the output of the add window

`Shell did not start up in time: Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

WAN (wan) -> igb1 -> v4/DHCP4: x.x.x.x/20 LAN (lan) -> igb0 -> v4: 192.168.0.1/24 OPT1 (opt1) -> em0 ->

  1. Logout (SSH only) 9) pfTop
  2. Assign Interfaces 10) Filter Logs
  3. Set interface(s) IP address 11) Restart webConfigurator
  4. Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
  5. Reset to factory defaults 13) Update from console
  6. Reboot system 14) Disable Secure Shell (sshd)
  7. Halt system 15) Restore recent configuration
  8. Ping host 16) Restart PHP-FPM
  9. Shell

Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

WAN (wan) -> igb1 -> v4/DHCP4: x.x.x.x/20 LAN (lan) -> igb0 -> v4: 192.168.0.1/24 OPT1 (opt1) -> em0 ->

  1. Logout (SSH only) 9) pfTop
  2. Assign Interfaces 10) Filter Logs
  3. Set interface(s) IP address 11) Restart webConfigurator
  4. Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
  5. Reset to factory defaults 13) Update from console
  6. Reboot system 14) Disable Secure Shell (sshd)
  7. Halt system 15) Restore recent configuration
  8. Ping host 16) Restart PHP-FPM
  9. Shell

Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

WAN (wan) -> igb1 -> v4/DHCP4: x.x.x.x/20 LAN (lan) -> igb0 -> v4: 192.168.0.1/24 OPT1 (opt1) -> em0 ->

  1. Logout (SSH only) 9) pfTop
  2. Assign Interfaces 10) Filter Logs
  3. Set interface(s) IP address 11) Restart webConfigurator
  4. Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
  5. Reset to factory defaults 13) Update from console
  6. Reboot system 14) Disable Secure Shell (sshd)
  7. Halt system 15) Restore recent configuration
  8. Ping host 16) Restart PHP-FPM
  9. Shell

Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

WAN (wan) -> igb1 -> v4/DHCP4: x.x.x.x/20 LAN (lan) -> igb0 -> v4: 192.168.0.1/24 OPT1 (opt1) -> em0 ->

  1. Logout (SSH only) 9) pfTop
  2. Assign Interfaces 10) Filter Logs
  3. Set interface(s) IP address 11) Restart webConfigurator
  4. Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
  5. Reset to factory defaults 13) Update from console
  6. Reboot system 14) Disable Secure Shell (sshd)
  7. Halt system 15) Restore recent configuration
  8. Ping host 16) Restart PHP-FPM
  9. Shell

Netgate pfSense Plus - Serial: xxxx - Netgate Device ID: xxxx

*** Welcome to Netgate pfSense Plus 23.01-RELEASE (amd64) on pfSense ***

WAN (wan) -> igb1 -> v4/DHCP4: x.x.x.x/20 LAN (lan) -> igb0 -> v4: 192.168.0.1/24 OPT1 (opt1) -> em0 ->

  1. Logout (SSH only) 9) pfTop
  2. Assign Interfaces 10) Filter Logs
  3. Set interface(s) IP address 11) Restart webConfigurator
  4. Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
  5. Reset to factory defaults 13) Update from console
  6. Reboot system 14) Disable Secure Shell (sshd)
  7. Halt system 15) Restore recent configuration
  8. Ping host 16) Restart PHP-FPM
  9. Shell

0END

C:\Users\x>`

About this issue

  • Original URL
  • State: closed
  • Created 3 years ago
  • Comments: 24 (14 by maintainers)

Most upvoted comments

This is probably the same problem as in https://github.com/xpipe-io/xpipe/issues/89, but it was only fixed for opnsense as I only had access to that. I should be able to adapt the fix to support pfsense as well