LilyGO-T-A76XX: Battery voltage problem

Hi, I’ve just bought this board (in Jan 2023) because battery voltage can be read, the version I got (directly from LilyGo via aliexpress) is 2022-2-28 V1.1. The pinout on the product page clearly shows that battery voltage can be read (see image below) yet #19 says that only 2022-7-28 V1.2 can read the voltage.

Screenshot 2023-01-22 at 10 37 39

The board I received doesn’t have the functionality of the product I ordered, can you send me one that does have this functionality? How can I get in touch to discuss it?

About this issue

  • Original URL
  • State: closed
  • Created 4 years ago
  • Comments: 36 (3 by maintainers)

Most upvoted comments

now connect first resistor on Battery + terminal and pin35 (IO35), second resistor connect on battery - terminal and pin35 (IO35). You will need solder station to solder them

@theMladyPan Thanks for providing detailed instructions, indeed that does sound simple, I’ll try it. I assume to get the voltage I read from pin35 as per the battery voltage sketch? I really appreciate the help

yes, the voltage will be exactly (+/- precision of ADC/resistors) half of the Battery’s voltage. If bat is 4.2V you should read 2100mV +/- (noise+precision). Again, this is how manufacturer do it on v1.2 of the board (as far as I know and remember)

now connect first resistor on Battery + terminal and pin35 (IO35), second resistor connect on battery - terminal and pin35 (IO35). You will need solder station to solder them

@theMladyPan Thanks for providing detailed instructions, indeed that does sound simple, I’ll try it. I assume to get the voltage I read from pin35 as per the battery voltage sketch? I really appreciate the help