WolframClientForPython: SocketAborted problem

My Environment: Activated MMA 12.0 works correctly on my Ubuntu 16.04 system.

I install WolframClient with following code:

pip install wolframclient -i https://pypi.doubanio.com/simple

Then I execute following codes in python 3.6.10:

from wolframclient.evaluation import WolframLanguageSession 
sess = WolframLanguageSession(path) 
sess.start() 

where, the path I try different values like the result of :

$ which WolframKernel

in my case, it’s ‘/usr/local/bin/WolframKernel’ , or the output of

First@$CommandLine 

which is ‘/usr/local/Wolfram/Mathematica/12.0/SystemFiles/Kernel/Binaries/Linux-x86-64/WolframKernel’ or use this path ‘/usr/local/Wolfram/Mathematica/12.0/Executables/WolframKernel’ which is default path of WolframLanguageSession().

Then errors are vary when I choose different paths, but can be concluded into 2 types.

  1. When path = ‘/usr/local/Wolfram/Mathematica/12.0/SystemFiles/Kernel/Binaries/Linux-x86-64/WolframKernel’ , it immediately returns following errors info:
Socket exception: Socket operation aborted.
Failed to start.
---------------------------------------------------------------------------
SocketAborted                             Traceback (most recent call last)
~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _kernel_start(self)
    436                 timeout=self.get_parameter("STARTUP_TIMEOUT"),
--> 437                 abort_event=_StartEvent(self.kernel_proc, self.trigger_termination_requested),
    438             )

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/zmqsocket.py in recv_abortable(socket, timeout, abort_check_period, abort_event, **kwargs)
     49                     if abort_event.is_set():
---> 50                         raise SocketAborted("Socket operation aborted.")
     51                 if timeout and (time.perf_counter() - start > timeout):

SocketAborted: Socket operation aborted.

During handling of the above exception, another exception occurred:

WolframKernelException                    Traceback (most recent call last)
<ipython-input-4-84c234a8332d> in <module>
----> 1 sess.start()

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/localsession.py in start(self, block, timeout)
    155                 self.terminate()
    156             finally:
--> 157                 raise e
    158 
    159     def start_future(self):

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/localsession.py in start(self, block, timeout)
    150             future = self.start_future()
    151             if future and block:
--> 152                 future.result(timeout=timeout)
    153         except Exception as e:
    154             try:

~/anaconda3/envs/detectron2/lib/python3.6/concurrent/futures/_base.py in result(self, timeout)
    430                 raise CancelledError()
    431             elif self._state == FINISHED:
--> 432                 return self.__get_result()
    433             else:
    434                 raise TimeoutError()

~/anaconda3/envs/detectron2/lib/python3.6/concurrent/futures/_base.py in __get_result(self)
    382     def __get_result(self):
    383         if self._exception:
--> 384             raise self._exception
    385         else:
    386             return self._result

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in run(self)
    525             # Kernel start requested.
    526             if payload is self.START:
--> 527                 self._safe_kernel_start()
    528                 future.set_result(True)
    529                 future = None

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _safe_kernel_start(self)
    364                 self._kernel_terminate()
    365             finally:
--> 366                 raise e
    367 
    368     _KERNEL_OK = b"OK"

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _safe_kernel_start(self)
    358         """ Start a kernel. If something went wrong, clean-up resources that may have been created. """
    359         try:
--> 360             self._kernel_start()
    361         except Exception as e:
    362             logger.warning("Failed to start.")

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _kernel_start(self)
    454             logger.warning("Socket exception: %s", se)
    455             raise WolframKernelException(
--> 456                 "Failed to communicate with kernel: %s." % self.kernel
    457             )
    458 

WolframKernelException: Failed to communicate with kernel: [path].
  1. When path != ‘/usr/local/Wolfram/Mathematica/12.0/SystemFiles/Kernel/Binaries/Linux-x86-64/WolframKernel’, it will wait for several seconds and return following errors:
Socket exception: Failed to read any message from socket tcp://127.0.0.1:39963 after 20.1 seconds and 200 retries.
Failed to start.
---------------------------------------------------------------------------
SocketOperationTimeout                    Traceback (most recent call last)
~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _kernel_start(self)
    436                 timeout=self.get_parameter("STARTUP_TIMEOUT"),
--> 437                 abort_event=_StartEvent(self.kernel_proc, self.trigger_termination_requested),
    438             )

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/zmqsocket.py in recv_abortable(socket, timeout, abort_check_period, abort_event, **kwargs)
     54                 "Failed to read any message from socket %s after %.1f seconds and %i retries."
---> 55                 % (socket.uri, time.perf_counter() - start, retry)
     56             )

SocketOperationTimeout: Failed to read any message from socket tcp://127.0.0.1:39963 after 20.1 seconds and 200 retries.

During handling of the above exception, another exception occurred:

WolframKernelException                    Traceback (most recent call last)
<ipython-input-3-84c234a8332d> in <module>
----> 1 sess.start()

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/localsession.py in start(self, block, timeout)
    155                 self.terminate()
    156             finally:
--> 157                 raise e
    158 
    159     def start_future(self):

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/localsession.py in start(self, block, timeout)
    150             future = self.start_future()
    151             if future and block:
--> 152                 future.result(timeout=timeout)
    153         except Exception as e:
    154             try:

~/anaconda3/envs/detectron2/lib/python3.6/concurrent/futures/_base.py in result(self, timeout)
    430                 raise CancelledError()
    431             elif self._state == FINISHED:
--> 432                 return self.__get_result()
    433             else:
    434                 raise TimeoutError()

~/anaconda3/envs/detectron2/lib/python3.6/concurrent/futures/_base.py in __get_result(self)
    382     def __get_result(self):
    383         if self._exception:
--> 384             raise self._exception
    385         else:
    386             return self._result

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in run(self)
    525             # Kernel start requested.
    526             if payload is self.START:
--> 527                 self._safe_kernel_start()
    528                 future.set_result(True)
    529                 future = None

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _safe_kernel_start(self)
    364                 self._kernel_terminate()
    365             finally:
--> 366                 raise e
    367 
    368     _KERNEL_OK = b"OK"

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _safe_kernel_start(self)
    358         """ Start a kernel. If something went wrong, clean-up resources that may have been created. """
    359         try:
--> 360             self._kernel_start()
    361         except Exception as e:
    362             logger.warning("Failed to start.")

~/anaconda3/envs/detectron2/lib/python3.6/site-packages/wolframclient/evaluation/kernel/kernelcontroller.py in _kernel_start(self)
    454             logger.warning("Socket exception: %s", se)
    455             raise WolframKernelException(
--> 456                 "Failed to communicate with kernel: %s." % self.kernel
    457             )
    458 

WolframKernelException: Failed to communicate with kernel: [path]

About this issue

  • Original URL
  • State: open
  • Created 7 years ago
  • Comments: 15 (7 by maintainers)

Most upvoted comments

Here are some investigations to try narrow the source of bugs. The problem you’re facing is that the kernel process ends abruptly. @MaxKinny that’s why self.subprocess.poll() has a value. Whereas it should be None as long as the process is running (see doc).

Could you setup Python logging to see if there is anything useful printed using:

import logging
logging.basicConfig(level=logging.DEBUG)

It’ll print to stdout. You should see the command used to start the WolframLanguage kernel. On my machine I get something like this:

DEBUG:wolframclient.evaluation.kernel.kernelcontroller:Kernel called using command: /Applications/Mathematica.app/Contents/MacOS/WolframKernel -noprompt -initfile /Users/dorianb/.../WolframClientForPython/wolframclient/evaluation/kernel/initkernel.m -run ClientLibrary`Private`KernelPrivateStart["tcp://127.0.0.1:57055", "tcp://127.0.0.1:57057"];.
INFO:wolframclient.evaluation.kernel.kernelcontroller:Kernel process started with PID: 33202

Note that this is the code for wolframclient 1.1.6. I’ll use it later, and you’d need to use the one printed on your machine, if running an older version of the library.

Using this command, you can try to mock the python side with Wolfram Language and see if the problem remains.

In a fresh kernel, open two ZMQ sockets with appropriate types:

Needs["ZeroMQLink`"];
out = SocketOpen[Automatic, "ZMQ_PUSH"]
in = SocketOpen[Automatic, "ZMQ_PULL"]
portout = out["DestinationPort"]
portin = in["DestinationPort"]

Now edit the starting command with the above ports. In my case the command becomes:

/Applications/Mathematica.app/Contents/MacOS/WolframKernel -noprompt -initfile /Users/dorianb/.../WolframClientForPython/wolframclient/evaluation/kernel/initkernel.m -run 'ClientLibrary`Private`KernelPrivateStart["tcp://127.0.0.1:53004", "tcp://127.0.0.1:53008"];'

And run it in a terminal. Hopefully you’ll see an error in your terminal that will help debugging your issue.

While the above runs, go back to the kernel and run the following. First read the “OK” string returned when the process has started:

ByteArrayToString[SocketReadMessage[in]] === "OK"

If you get this it means that the kernel initialization was successful. I doubt you’ll receive the message. But if you do, you can also try to evaluate something using:

ZMQSocketWriteMessage[out, BinarySerialize[{$MachineName, Now}]]
wxf = SocketReadMessage[in]