WLED: ESP8266: network problems
What happened?
I tried to install WLED on a new ESP8266. This worked, but I have massive problems with the network connection, as you can see in the following ping. There is no way to access the web interface. I tried it with versions 0.15.0, 0.14.4, 0.14.3, 0.14.2 and 0.14.1, and the error pattern is identical everywhere. There is no problem with version 0.14.0. Everything works normally there. I was able to reproduce the problem with five other ESP8266s. Its always the same. Another router was tested with the same result. The WLED-AP keeps opening and closing. But I can’t open the web interface.
To Reproduce Bug
Installation via install.wled.me and manually flashed. Result is identical.
Expected Behavior
I would expect the network connection to work. Since the ESP works fine with version 0.14.0, I can rule out problems with the ESP and the network.
Install Method
Binary from WLED.me
What version of WLED?
WLED 0.14.1 and higher
Which microcontroller/board are you seeing the problem on?
ESP8266
Relevant log/trace output
Reply from 192.168.178.180: bytes=32 time=161ms TTL=255
Request timed out.
Reply from 192.168.178.180: bytes=32 time=138ms TTL=255
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Reply from 192.168.178.15: Destination host unreachable.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.178.180: bytes=32 time=166ms TTL=255
Request timed out.
Reply from 192.168.178.180: bytes=32 time=143ms TTL=255
Reply from 192.168.178.180: bytes=32 time=187ms TTL=255
Reply from 192.168.178.180: bytes=32 time=426ms TTL=255
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.178.180: bytes=32 time=1252ms TTL=255
Reply from 192.168.178.180: bytes=32 time=7ms TTL=255
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.178.180: bytes=32 time=49ms TTL=255
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.178.180: bytes=32 time=195ms TTL=255
Request timed out.
Reply from 192.168.178.180: bytes=32 time=169ms TTL=255
Reply from 192.168.178.180: bytes=32 time=136ms TTL=255
Reply from 192.168.178.180: bytes=32 time=241ms TTL=255
Reply from 192.168.178.180: bytes=32 time=140ms TTL=255
Request timed out.
Reply from 192.168.178.180: bytes=32 time=292ms TTL=255
Request timed out.
Reply from 192.168.178.180: bytes=32 time=263ms TTL=255
Request timed out.
Anything else?
I have a lot of existing WLED instances on ESP8266 with versions 0.14.4 and 0.15.0. It seems to me that the problem only occurs with new installations.
Code of Conduct
- I agree to follow this project’s Code of Conduct
About this issue
- Original URL
- State: open
- Created 2 years ago
- Comments: 25 (2 by maintainers)
I did ineed misread, I understood some devices to work. chances are high that its a hardware issue though. @1rfsNet did you try with an added large capacitor on the 3.3V rail?
I think you misread the report @DedeHai
It’s only with the later releases he sees issues
Can you try the _compat build please @1rfsNet