huawei_solar: [Bug]: Integration won't start
Describe the issue
today morning i found that huawei solar didn’t work at all. I tried to upgraded ha core to 9.2 and the integration to the very latest but nothing has changed
Bescribe your Huawei Solar Setup
Inverter Type: SUN2000-10KTL-M1 Inverter Firmware version: last one SDongle present: no Power meter present: three phase Battery:LUNA2000 20kWh Battery Firmware version: last one
How do you connect to the inverter?
Over serial, with a serial-to-USB stick
Upload your Diagnostics File
can not download because the integration doesn’t work
here the debug log home-assistant_huawei_solar_2023-09-14T14-52-59.813Z.log
Upload your relevant debug logs
already uploaded
Please confirm the following:
- The problem is still present in the latest release of this integration.
- I did not find an existing issue describing this problem.
- I did upload the diagnostics-file that I could retrieve from the ‘Devices & Services Page’
- I did upload the relevant debug logs (via ‘Enable Debug Logging’-feature or by manually configuring HA logging)
About this issue
- Original URL
- State: closed
- Created 10 months ago
- Comments: 15 (3 by maintainers)
In my last comment here I extensively outlined how you can prove to yourself/to me what your gut feelings are telling you.
I cannot do anything with gut feelings, only with properly well-substantiated bug reports and additional diagnosis to rule out problems outside of the integration.
@wlcrs I apologize, but you were right. Both of my usb-rs485 are broken. I bought just now a new one and tried with qModMaster and I can read data. So … excuse me 😞 and thank you for your patience with me.
You have everything on #447 You re welcome