evok: [NEURON] Web interface does not work (port issue)

Hi,

have previously setup 10+ Neuron S103s with Evok, given a few months ago.

However recently I cannot access the web interface when installing. I get a ‘404’. I’ve tried changing port numbers etc but I get nothing. Always 404.

Installing PIGPIO first:

wget abyz.co.uk/rpi/pigpio/pigpio.zip
unzip pigpio.zip
cd PIGPIO
make
sudo make install

Installing Evok like so:

wget https://github.com/UniPiTechnology/evok/archive/master.zip
unzip master.zip
cd evok-master
sudo bash install-evok.sh (you miss the sudo from your guide)

Select ‘3’ option for Neuron and then reboot when prompted.

Once rebooted:

sudo service evok status tells me:

● evok.service - Evok Modbus/Websocket/Rpc Server
   Loaded: loaded (/etc/systemd/system/evok.service; enabled)
   Active: active (running) since Fri 2017-09-15 11:30:52 UTC; 3min 22s ago
 Main PID: 1367 (python)
   CGroup: /system.slice/evok.service
           ├─1367 /usr/bin/python /opt/evok/evok.py
           └─1374 /usr/bin/python /opt/evok/evok.py

Sep 15 11:30:52 raspberrypi systemd[1]: Started Evok Modbus/Websocket/Rpc Server.

So I run sudo service evok stop, then modify the conf file to a free port, say 21555.

I then run sudo service evok start and enter 192.168.1.172:21555 (ip of my UniPi) on my computer’s chrome browser, and get 404: Not Found.

Running raspbian on this UniPi.

I had written myself a full guide a month or so ago to follow the steps, and it would install perfectly every time - what’s changed?

Thanks

About this issue

  • Original URL
  • State: closed
  • Created 9 years ago
  • Comments: 22 (8 by maintainers)

Most upvoted comments

Seems to have randomly autodiscovered now…