turtlebot4: LiDAR cannot be stopped through service
Please provide the following information:
- OS: Ubuntu 22.04.02 LTS
- ROS Distro: Humble
- Built from source or installed: installed
- Package version: ros-humble-turtlebot4-node 1.0.1-1jammy.20230228.204604
Expected behaviour
When calling the service /stop_motor, the motor of the LiDAR should stop, as it did in Galactic.
Actual behaviour Instead, the LiDAR continues to turn.
To Reproduce
- Connect to the TurtleBot4 using ssh.
- Check that the service is available (
ros2 node info /turtlebot4_3/turtlebot4_nodeandros2 service listboth show the available service/turtlebot4_3/stop_motor: std_srvs/srv/Empty). - Call the service:
ros2 service call /turtlebot4_3/stop_motor std_srvs/srv/Empty.
Other notes We have used the setup utility to set the namespace of the robots. The service for starting and stopping the camera works without any issues. Prior to upgrading the robot from Galactic to Humble, the same service (without the namespace) was able to stop and start the LiDAR motor.
About this issue
- Original URL
- State: closed
- Created 3 years ago
- Comments: 16 (7 by maintainers)
ok here you go
Package: ros-humble-rplidar-ros Version: 2.1.3-3jammy.20230724.202913 Priority: optional Section: misc Maintainer: Wang DeYou deyou.wang@slamtec.com Installed-Size: 857 kB Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), ros-humble-rclcpp, ros-humble-rclcpp-components, ros-humble-sensor-msgs, ros-humble-std-srvs, ros-humble-ros-workspace Download-Size: 156 kB APT-Manual-Installed: no APT-Sources: http://packages.ros.org/ros2-testing/ubuntu jammy/main arm64 Packages Description: The rplidar ros package, support rplidar A1/A2/A3/S1/S2/S3/T1