nuki_hub: Nuki_ble starting with NH v9.03 breaks communication
PROBLEM DESCRIPTION
After updating from NH 9.02 to 9.03 or 9.04, the communication between NH and the Nuki lock seems to get stuck. Lock/unlock attempts sent by HA via NH are only performed after a few seconds after rebooting NH, like for two to three quick lock/unlock attempts. After that, it’s broken. Just another unreliable update. Happened for all my NHs and all my locks. Downgraded to NH 9.02, everything is working normally.
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
- Read the Contributing Guide and Policy and the Code of Conduct
- Searched the problem in issues
- Searched the problem in discussions
- Searched the problem in the docs
- Searched the problem in the chat
- Device used (e.g., ESP32-S3): LOLIN32-Lite
- Nuki Hub binary firmware version number used: 9.03 and 9.04
- Pre-compiled
- Self-compiled
- Provide the output of http://nukihubIP/info:
Not available as downgraded to 9.02 again because I need a reliable NH
TO REPRODUCE
Update NH to 9.03 or 9.04 with the updated nuki_ble (seems to not be well tested…).
EXPECTED BEHAVIOUR
Lock/unlock commands are reliably working, even more than 3 times or 2 minutes after rebooting NH.
SCREENSHOTS
If applicable, add screenshots to help explain your problem.
ADDITIONAL CONTEXT
Add any other context about the problem here.
(Please, remember to close the issue when the problem has been addressed)
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Reactions: 8
- Comments: 23 (5 by maintainers)
@iranl I’m experiencing the same issue as described. I just installed 9.05-master4 and after approx 5 minutes it still stops working. In MQTT i can see that 3 retries (as configured) are made, but the “commandResult” is “error”.
This seems fixed. Please re-open if issues persist on 9.05-master5/9.05-beta1 and up. In that case please add serial logs
2 hours up with 9.05-master5 with no issues so far, will report back in a few hours.
You’re right. Up 1 hour now and everything works for me. :hand_with_index_finger_and_thumb_crossed:
That doesn’t look like the correct zip file. Make sure you download from the releases page https://github.com/technyon/nuki_hub/releases
Contents should look like this