nuki_hub: Nuki Lock freezes(goes offline) after a while when connected to Nuki Hub
PROBLEM DESCRIPTION
A clear and concise description of what the problem is. Nuki Lock 4.0 Pro freezes/goes offline after 20-30h being connected to Nuki Hub, stops being available via BT. It happens only when Lock ist connected to Nuki Hub. The Nuki Lock becomes not available even via original app. The only one fix, that works: remove the battery and put it back Tried with FW 8.34 and FW 8.35 - No changes.
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
- [ x] Read the Contributing Guide and Policy and the Code of Conduct
- [ x] Searched the problem in issues
- [ x] Searched the problem in discussions
- [x ] Searched the problem in the docs
- Searched the problem in the chat
- [x ] Device used (e.g., ESP32-S3): M5 Atom S3 Lite
- [ x] Nuki Hub binary firmware version number used: FW 8.34 and FW 8.35
- [ x] Pre-compiled
- Self-compiled
- [ x] Provide the output of http://nukihubIP/info:
Lock config ACL (Timezone offset): Disallowed
Lock config ACL (DST mode): Disallowed
Lock config ACL (Fob Action 1): Disallowed
Lock config ACL (Fob Action 2): Disallowed
Lock config ACL (Fob Action 3): Disallowed
Lock config ACL (Single Lock): Allowed
Lock config ACL (Advertising Mode): Disallowed
Lock config ACL (Timezone ID): Disallowed
Lock config ACL (Unlocked Position Offset Degrees): Disallowed
Lock config ACL (Locked Position Offset Degrees): Disallowed
Lock config ACL (Single Locked Position Offset Degrees): Disallowed
Lock config ACL (Unlocked To Locked Transition Offset Degrees): Disallowed
Lock config ACL (Lock n Go timeout): Disallowed
Lock config ACL (Single button press action): Disallowed
Lock config ACL (Double button press action): Disallowed
Lock config ACL (Detached cylinder): Disallowed
Lock config ACL (Battery type): Disallowed
Lock config ACL (Automatic battery type detection): Disallowed
Lock config ACL (Unlatch duration): Disallowed
Lock config ACL (Auto lock timeout): Disallowed
Lock config ACL (Auto unlock disabled): Allowed
Lock config ACL (Nightmode enabled): Disallowed
Lock config ACL (Nightmode start time): Disallowed
Lock config ACL (Nightmode end time): Disallowed
Lock config ACL (Nightmode auto lock enabled): Disallowed
Lock config ACL (Nightmode auto unlock disabled): Disallowed
Lock config ACL (Nightmode immediate lock on start): Disallowed
Lock config ACL (Auto lock enabled): Allowed
Lock config ACL (Immediate auto lock enabled): Disallowed
Lock config ACL (Auto update enabled): Disallowed
Network device: Built-in Wi-Fi
Uptime: 634 minutes
Heap: 141228
Stack watermarks: nw: 7712, nuki: 2328, pd: 96
Restart reason FW: BLEBeaconWatchdog
Restart reason ESP: ESP_RST_SW: Software reset via esp_restart.
TO REPRODUCE
Steps to reproduce the behavior: Pair Nuki Lock 4 Pro to Nuki Hub, wait for 1-2 days
EXPECTED BEHAVIOUR
A clear and concise description of what you expected to happen. Lock continues doesn’t go offline after couple days and continues to be available via BT with the original Nuki App.
SCREENSHOTS
If applicable, add screenshots to help explain your problem.
ADDITIONAL CONTEXT
Add any other context about the problem here.
(Please, remember to close the issue when the problem has been addressed)
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Comments: 19 (2 by maintainers)
Debug version is not necessary