sway: [1.10][Regression] Output not detected, black screen, duplicated screens

Sway Version: 1.10

output DP-1 pos    0 0 res 3440x1440@100Hz
output DP-2 pos 3440 0 res 3440x1440@100Hz adaptive_sync on
workspace 1 output DP-2
workspace 2 output DP-1
# Focus on main monitor on startup
focus output DP-2
bar {
    swaybar_command waybar
}
include /etc/sway/config.d/*
  • Description:
  • I have a 3 monitor setup (swaymsg -t get_outsputs)
  • After updating from 1.9 to 1.10, it seems my center monitor is not recognized and I get a black screen with the sway bar (see image below). The two monitors on the side seem to get mirrored, whereas the expected setup is that they are independent (see 1.9 screenshot for working scenario).

Problematic example in 1.10 v1 10

Working example in 1.9 screenshot

About this issue

  • Original URL
  • State: closed
  • Created 2 years ago
  • Comments: 15 (6 by maintainers)

Most upvoted comments

It seems that Sway 1.10 doesn’t detect output configurations at startup, however reloading Sway configurations using swaymsg reload, output configurations will be detected.

Downgrading to Sway 1.9 seems to solve the issue as well.

@Sinaaaa yes, still works