home_assistant_solarman: Querying registers fails for Deye SUN600G3-EU-230
Hello,
I own a Deye SUN600G3-EU-230, that is currently connected to a single panel with 420W for testing purposes.
Here’s my current configuration:
HA version: Home Assistant 2023.1.7
Inverter firmware: MW3_16U_5406_1.53
Device S/N: 416*******
Port: 8899
Slave ID: 1
Parameters: deye_4mppt.yaml
I am unsure if I’m setting things up wrong or whether there’s a problem with the inverter, but no matter what parameters I try, I always get the following in my HA logs:
2023-01-31 13:02:33.076 WARNING (MainThread) [homeassistant.helpers.entity] Update of sensor.deye_pv1_voltage is taking over 10 seconds
2023-01-31 13:01:25.062 WARNING (SyncWorker_7) [custom_components.solarman.solarman] Querying registers [3 - 128] failed, aborting.
2023-01-31 13:00:25.332 WARNING (SyncWorker_9) [custom_components.solarman.solarman] Querying registers [3 - 128] failed, aborting.
2023-01-31 13:02:39.275 WARNING (SyncWorker_9) [custom_components.solarman.solarman] Querying registers [3 - 128] failed, aborting.
2023-01-31 13:03:30.467 WARNING (SyncWorker_5) [custom_components.solarman.solarman] Querying registers [3 - 128] failed, aborting.
At this point I’ve run out of ideas and even thought about getting API access to the solarmanpv site, however I’d prefer to be able to collect data without relying on a cloud. Once I set up local data collection I’ll even turn off the cloud access with my firewall. Not a big fan of devices phoning home.
This might be related to #130 but I’m not sure, so I’m opening a new issue. I’m sorry if that’s wrong.
If there’s any tests you need me to perform, I would be happy to run those.
Thanks for taking the time to look at this!
EDIT: Unsure if helpful, but I’ve found a few posts on various sites all recommending pysolarmanv5. Is this already in use by this project?
About this issue
- Original URL
- State: open
- Created 4 years ago
- Comments: 15 (4 by maintainers)
Commits related to this issue
- Change output frequency class to frequency While working on #195 I noticed that this entry might've been copy&pasted badly. — committed to Byter09/home_assistant_solarman by Byter09 4 years ago
Just for the convenience of future readers:
deye_4mppt.yamland copy it tocustom_parameters.yamlvalidationand comment out the whole part to look like this:custom_parameters.yamlThis made it work for me. 😃
Same problem here, same fix worked (removing the validation lines)
btw using the deye_4mppt.yaml for DEYE 600 G3 here
I had the same issue and found what was wrong for me. I have aSUN-M80G3-EU-Q0 and was using the wrong serial number. Do NOT use the inverter serial number, but the device serial number, to query your inverter. I looked at the modbus messages directly and this is what the error code reported (wrong serial). Unfortunately, this library does not handle this error code.
Edit: Also, I used the latest version from this repository instead of the latest from HACS store so I could use deye_2mppt.yaml
Deye SUN600G3-EU-230 no(empty) data issue
Maybe totally wrong though about this issue… I played around with some stuff in the hidden config(config_hide.html) of the microinverter to deactivate the access point: If the Working mode is set to TRANSPARENCY(instead of DATA Collection) there will be only EMPTY Values either if you access the normal status page or using console command:
So IF no data is shown(while inverter is connected) have a look at the secret page.
Perhaps wrong config file used(for deye600 the deye_2mppt.yaml file should be used as other definitions may contain additional sensors which are NOT present in your device)
That’s the one that was installed when it arrived. I upgraded manually using https://github.com/dasrecht/deye-firmware/blob/main/0_D0002_18/MW3_16U_5406_1.53.bin
sure: Firmware version MW3_15U_5406_1.471
Thanks for your detailed guide… For me it is still not working. Nevertheless, the error message chagend to:
Can anyone help?
you can try this https://github.com/StephanJoubert/home_assistant_solarman/issues/192#issuecomment-1408446447