mqtt_vacuum_camera: Missing map-data topic of the vacuum cause constant Home Assistant reboots

Checklist

  • I have updated the integration to the latest version available
  • I have checked if the problem is already reported

The problem

After fresh installation of Valetudo Vacuum Camera and restart on HA on RPi4 constant Home Assistant reboots start as soon as Vacuum device id is set in integration setup form. This unfortunatelly makes Valetudo Vacuum Camera unusable.

Luckily there is ~15 sec timeslot when HA has loaded enough to be able to access /config/integrations/dashboard and delete Valetudo Vacuum Camera integration. Then reboots stop immediately.

Nothing specific can be observed in HA logs execpt most likely unrelated:

2024-01-27 11:05:19.667 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /store request
2024-01-27 11:05:19.670 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /store - 
2024-01-27 11:05:19.671 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /host/info request
2024-01-27 11:05:19.672 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /host/info - 
2024-01-27 11:05:19.674 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /supervisor/info request
2024-01-27 11:05:19.674 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /supervisor/info - 
2024-01-27 11:05:19.675 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /info request
2024-01-27 11:05:19.676 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /info - 
2024-01-27 11:05:19.676 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /core/info request
2024-01-27 11:05:19.677 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /core/info - 
2024-01-27 11:05:19.677 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /network/info request
2024-01-27 11:05:19.678 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /network/info - 
2024-01-27 11:05:19.678 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /resolution/info request
2024-01-27 11:05:19.679 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /resolution/info - 
2024-01-27 11:05:19.680 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /os/info request
2024-01-27 11:05:19.680 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /os/info - 
2024-01-27 11:05:19.681 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /addons request
2024-01-27 11:05:19.682 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /addons - 
2024-01-27 11:05:19.682 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /store request
2024-01-27 11:05:19.683 ERROR (MainThread) [homeassistant.components.hassio] Failed to to call /store - 
2024-01-27 11:05:19.684 ERROR (MainThread) [homeassistant.components.hassio.handler] Timeout on /resolution/info request
2024-01-27 11:05:19.687 ERROR (MainThread) [homeassistant.components.hassio.issues] Failed to update supervisor issues: HassioAPIError()

What version of an integration has described problem?

v.1.5.7

What was the last working version of an integration?

No response

What vacuum model do you have problems with?

Dreame D9 Pro

Please firmware installed on your Vacuum.

2023.12.0

What version of Home Assistant do you use?

2024.1.5

What type of installation are you running?

Home Assistant Supervised

Camera’s settings.

No response

Logs or Errors shown in the HA snapshots (please enable the Debug Mode)

No response

Additional information

No response

About this issue

  • Original URL
  • State: closed
  • Created 3 years ago
  • Comments: 23 (12 by maintainers)

Most upvoted comments

@tlpbu I’ll move this to discussions at this point we concluded that the camera isn’t guilty… for the restart if you agree.

Removed second vaccuum from integration and HA restarts loop stopped and camera for first vacuum works so this definately is the root cause. Updated bug title for future reference.

Did a fresh setup of the camera again just to double check

Sorry, autocorrect probably. Rephrased below. Will try to install manually v1.5.6 later and see if that has same issue.

Unfortunatelly will not be so quick for me to verify because HACS isntallation dies not applow to select version as it is show in instruction - latest version is always installed.

Unfortunatelly will not be so quick for me to verify because HACS installation does not allow to select version as it is shown in instruction - latest version is always installed. Screenshot 2024-01-27 at 13 18 30

Upss okay this happens because of the new UI of HACS, if you press download then there is the possibility to select the version by the way I try again to remove all and setup as scratch 1.5.7 and it did work on…

Screenshot 2024-01-27 at 12 16 18

@tlpbu please try once again to setup 1.5.7 with HACS.

  • download the camera and once it is downloaded you need to restart HA.
  • once HA restart, please search for the valetudo vacuum camera in the “Devices & services” settings of HA.
  • you will be ask to select the vacuum entity and then confirm the area, then all should be set.
  • if you experience problems again feel free to let me know, but please enable the debug logs of the camera to catch were is the problem as per I can’t reproduce this issue on tests RPI4… as I wrote.