yi-hack-Allwinner-v2: Yi Dome Guard YRS.3019 RTSP broken on yi-hack-Allwinner-v2 0.3.2

As others experienced, RTSP broken on yi-hack-Allwinner-v2 0.3.2 for Yi Dome Guard YRS.3019. In my case, VLC can’t connect and display the stream.

Firmware Version 0.3.2 Base Version 12.1.05.1_202302091435

As @Solarbotics pointed out, editing <sd>/yi-hack/model_suffix file contents to r35gb resolves the issue.

Maybe it’s an issue with Base Version 12.1.05.1_202302091435? Update 1: I have another camera with Base Version 9.0.05.33_202009251856, and it works just fine with VLC However, both versions don’t work with Synology Surveillance Station 9.2.0 (w/o login/password or with login/password, Fault response if unknown request: on, Synology NVR compatibility: on)

Update 2: Base Version 9.0.05.33_202009251856, hack v0.2.6 works with Synology Surveillance Station 9.2.0 with login/password

I decided to create a separate issue out of https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/484 because

  • that issue is an uber-issue regarding support for Yi Dome Guard YRS.3019
  • that issue has been closed for quite some time

About this issue

  • Original URL
  • State: closed
  • Created 2 years ago
  • Reactions: 1
  • Comments: 37 (16 by maintainers)

Most upvoted comments

I finally got time to investigate.

  • In the meantime there was a new yi firmware release 12.1.05.4_202411081549
  • There was also a new hack firmware release 0.3.3
  • Everything works fine on this combination (VLC, Synology Surveillance Station 9.2.2-11575)!

Here’s my config:

  • disable cloud: on
  • Recording without Cloud: on
  • rtsp stream: high
  • rtsp audio: aac
  • ONVIF configuration
    • Fault response if unknown request: off
    • Synology NVR compatibility: on
  • Snapshot: off
  • Snapshot for recorded video: off
  • telnet: off
  • enable swap: on
  • set ONVIF credentials (login/password)

Hence, I’m closing this issue. @roleoroleo thank you very much for your help!

Il will add the ipc_cmd command to system.sh. And I will share a new version to try.

Please, try this binary: rRTSPServer.gz

Yes, the buffer contains 2 different h264 streams: low and high res. You can check the file looking for SPS frames (they starts with the hex sequence 00 00 00 01 67).

The log is not ok, the parser is unable to find the frames and the capture thread does not start. I don’t know why, I have to check the code. But I’m afk for a while.

@roleoroleo I just went on a trip, and will check it upon return in about a week or so.