yi-hack-Allwinner: rRTSPServer not starting with 0.1.8

After online upgrade to 0.1.8 no rtsp connections are being accepted.

# sh script/wd_rtsp.sh
Failed to create Fifo Source
Failed to create Fifo Source 
Failed to create Fifo Source

/tmp/audio_fifo does not exist and RTSP_AUDIO=no

# dmesg
[    3.802075] --->sunxi_daudio_dev_probe<--- end.
[    3.820387] digital_vol:0, lineout_vol:31, main_gain:23, pa_msleep:160, pa_level:1
[    3.820402] adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:1, dachpf:0
[    3.820489] sunxi-internal-codec codec: [sunxi_internal_codec_probe] codec probe finished.
[    3.827702] [sunxi_card_init] card init finished.
[    3.828039] sunxi-codec-machine sndcodec: sun8iw19codec <-> codec mapping ok
[    3.908975] sunxi-codec-machine sndcodec: [sunxi_card_dev_probe] register card finished.
[    3.916639] snddaudio snddaudio0: codec: snd-soc-dummy, codec_dai: snd-soc-dummy-dai.
[    3.917228] snddaudio snddaudio0: snd-soc-dummy-dai <-> daudio0 mapping ok
[    3.975751] [sensor_power_warn] sensor_power_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    3.975767] [sensor_power_warn] sensor_power_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    3.975777] [sensor_power_warn] sensor_power_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    4.233321] sunxi-wlan wlan: bus_index: 1
[    4.343622] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    4.360888] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    4.381563] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    4.384018] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    4.385892] sunxi-mmc sdc1: smc 1 p1 err, cmd 8, RTO !!
[    4.392133] sunxi-mmc sdc1: card claims to support voltages below defined range
[    4.401925] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    4.402018] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    4.402178] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    4.403215] mmc1: new high speed SDIO card at address 0001
[    6.009239] 
[    6.009239] [CPLD_PERIPH] cpld_init ok, [ ver=Dec 27 2019, 09:42:03 ] 
[    6.009708] [CPLD_PERIPH] pwm init ok.
[    6.009718] [CPLD_PERIPH] timer init ok.
[    6.009724] timer resolution:4 MHZ
[    6.009728] [CPLD_PERIPH] HZ = 250 
[    8.588189] [sensor_power_warn] sensor_power_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    8.588206] [sensor_power_warn] sensor_power_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    8.588215] [sensor_power_warn] sensor_power_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    9.607675] [CPLD_PERIPH] Timer closed.
[    9.607687] [CPLD_PERIPH] Timer opened.
[    9.929416] cedar_ve: VE real_fre=300000000
[   10.081529] snddaudio snddaudio0: codec_dai set sysclk failed
[   10.081541] snddaudio snddaudio0: codec_dai set set_pll failed.
[   10.081548] snddaudio snddaudio0: codec dai set fmt failed
[   10.081569] snddaudio snddaudio0: codec_dai set clkdiv failed
[   10.151609] s_fmt set width = 1936, height = 1096
[   10.243490] into set sensor hfilp the value:0 
[   10.245022] [VIN]sensor_flip_option:isp0 reset!!!
[   10.245347] into set sensor hfilp the value:0 
[   10.247013] [VIN]sensor_flip_option:isp0 reset!!!
[   10.256338] cedar_ve: VE real_fre=300000000
[   10.258086] cedar_ve: VE real_fre=300000000
[   21.853824] [CPLD_PERIPH] Timer closed.
[   23.307052] cedar_ve: VE real_fre=300000000
[   23.335604] cedar_ve: VE real_fre=300000000
[   23.675459] cedar_ve: VE real_fre=300000000
[   23.870330] snddaudio snddaudio0: codec_dai set sysclk failed
[   23.870343] snddaudio snddaudio0: codec_dai set set_pll failed.
[   23.870351] snddaudio snddaudio0: codec dai set fmt failed
[   23.870375] snddaudio snddaudio0: codec_dai set clkdiv failed