freebsd-wifibox: Broadcom-wl suspend to ram stopped working

Description

When installing the main branch of wifbox-apline with broadcom-wl drive my suspend to ram stops working. When I say stops working it will go to sleep but it will not wake. When I was testing some of the earlier dev branchs and the broadcom-wl driver was not assigned a device wlan0 this was not an issue. It seems to be once the broadcom-wl module got loaded and assigned to wlan0 in the wifibox this became an issue. If wifbox is not installed suspend to ram works.

Host operating system

FreeBSD foo 13.2-RELEASE-p1 FreeBSD 13.2-RELEASE-p1 GENERIC amd64

Wireless NIC

bwn_pci0@pci0:2:0:0:    class=0x028000 rev=0x02 hdr=0x00 vendor=0x14e4 device=0x4331 subvendor=0x106b subdevice=0x00f5
    vendor     = 'Broadcom Inc. and subsidiaries'
    device     = 'BCM4331 802.11a/b/g/n'
    class      = network

Wifibox version

wifibox version 0.11.0

Disk image type and version

The kind of VM image in use, e.g. Wifibox/Alpine, and its version.

Changes to the default configuration files

rc.conf with its relevant wifibox add ons

devmatch_enable="YES"
devmatch_blocklist="if_iwm if_iwlwifi"


wifibox_enable="YES"



PORTS config for Alpine
UDS_PASSTHRU
XX_DRIVER_WL
COMP_XZ
APP_WPA_SUPPLICANT

Logs

Please copy and paste any relevant log output from the following sources:

- /var/log/wifibox.log (with DEBUG logging verbosity)

2023-07-30T18:46:45-0400 DEBUG Program started as /usr/local/sbin/wifibox, with arguments: stop
2023-07-30T18:46:45-0400 INFO  Begin: wifibox stop
2023-07-30T18:46:45-0400 DEBUG stop=GN
2023-07-30T18:46:45-0400 WARN  Guest is not running, hence not stopped
2023-07-30T18:46:45-0400 INFO  Removing null-modem devices
2023-07-30T18:46:45-0400 INFO  Null-modem devices are removed
2023-07-30T18:46:45-0400 INFO  Destroying bridge interface: wifibox0
2023-07-30T18:46:45-0400 DEBUG [ifconfig] ifconfig: interface wifibox0 does not exist
2023-07-30T18:46:45-0400 WARN  No linked tap inteface found for wifibox0
2023-07-30T18:46:45-0400 INFO  End: wifibox stop
2023-07-30T18:47:35-0400 DEBUG Program started as /usr/local/sbin/wifibox, with arguments: start
2023-07-30T18:47:35-0400 INFO  Begin: wifibox start
2023-07-30T18:47:35-0400 DEBUG start=GN
2023-07-30T18:47:35-0400 INFO  Creating bridge interface: wifibox0
2023-07-30T18:47:35-0400 DEBUG [ifconfig] wifibox0
2023-07-30T18:47:35-0400 INFO  Linking tap interface to wifibox0: tap0
2023-07-30T18:47:35-0400 DEBUG assert loaded: kmod=vmm, kmod_file=/boot/modules/vmm.ko
2023-07-30T18:47:35-0400 DEBUG Kernel module vmm is not loaded
2023-07-30T18:47:35-0400 DEBUG Kernel module vmm was loaded successfully
2023-07-30T18:47:35-0400 DEBUG assert hardware support present: iommu=1, amdvi=0
2023-07-30T18:47:35-0400 DEBUG Backends reported by bhyve:
2023-07-30T18:47:35-0400 DEBUG [bhyve] ahci
2023-07-30T18:47:35-0400 DEBUG [bhyve] ahci-hd
2023-07-30T18:47:35-0400 DEBUG [bhyve] ahci-cd
2023-07-30T18:47:35-0400 DEBUG [bhyve] e1000
2023-07-30T18:47:35-0400 DEBUG [bhyve] dummy
2023-07-30T18:47:35-0400 DEBUG [bhyve] hda
2023-07-30T18:47:35-0400 DEBUG [bhyve] fbuf
2023-07-30T18:47:35-0400 DEBUG [bhyve] amd_hostbridge
2023-07-30T18:47:35-0400 DEBUG [bhyve] hostbridge
2023-07-30T18:47:35-0400 DEBUG [bhyve] lpc
2023-07-30T18:47:35-0400 DEBUG [bhyve] nvme
2023-07-30T18:47:35-0400 DEBUG [bhyve] passthru
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-9p
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-blk
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-console
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-net
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-rnd
2023-07-30T18:47:35-0400 DEBUG [bhyve] virtio-scsi
2023-07-30T18:47:35-0400 DEBUG [bhyve] uart
2023-07-30T18:47:35-0400 DEBUG [bhyve] xhci
2023-07-30T18:47:35-0400 INFO  Bringing up null-modem devices for console connection
2023-07-30T18:47:35-0400 DEBUG assert loaded: kmod=nmdm, kmod_file=nmdm
2023-07-30T18:47:35-0400 DEBUG Kernel module nmdm is not loaded
2023-07-30T18:47:35-0400 DEBUG Kernel module nmdm was loaded successfully
2023-07-30T18:47:35-0400 INFO  Null-modem devices are available
2023-07-30T18:47:35-0400 INFO  Waiting for bhyve to start up
2023-07-30T18:47:35-0400 DEBUG Program started as /usr/local/sbin/wifibox, with arguments: _manage_vm
2023-07-30T18:47:35-0400 DEBUG assert daemonized: parent=daemon
2023-07-30T18:47:35-0400 INFO  VM manager launched
2023-07-30T18:47:35-0400 INFO  Gathering necessary configuration files for launching the guest
2023-07-30T18:47:35-0400 INFO  Pulling bhyve options from configuration file
2023-07-30T18:47:35-0400 DEBUG cpus=1, memory=128M, passthru=2/0/0, console=yes
2023-07-30T18:47:35-0400 INFO  Guest console is configured to use
2023-07-30T18:47:35-0400 INFO  Passthru device is configured: 2/0/0
2023-07-30T18:47:35-0400 INFO  PPT driver is configured for pci2:0:0 device
2023-07-30T18:47:35-0400 INFO  tap interface is configured: tap0
2023-07-30T18:47:35-0400 INFO  Launching guest wifibox from /usr/local/share/wifibox with grub-bhyve
2023-07-30T18:47:35-0400 INFO  Application config is found at /usr/local/etc/wifibox/wpa_supplicant
2023-07-30T18:47:35-0400 INFO  Application config will be mounted writeable
2023-07-30T18:47:35-0400 DEBUG Devices: virtio-blk,/usr/local/share/wifibox/disk.img virtio-9p,config=/usr/local/etc/wifibox/appliance,ro virtio-9p,var=/var/run/wifibox/appliance virtio-9p,app_config=/usr/local/etc/wifibox/wpa_supplicant
2023-07-30T18:47:35-0400 DEBUG Arguments:  -S -M 128M -r host -c /dev/nmdm-wifibox.1A -d /usr/local/share/wifibox wifibox
2023-07-30T18:47:35-0400 INFO  Launching guest wifibox from /usr/local/share/wifibox with bhyve
2023-07-30T18:47:35-0400 DEBUG Arguments:  -c 1 -m 128M -AHP -u -S -l com1,/dev/nmdm-wifibox.1A -s 0,hostbridge -s 31,lpc -s 4:0,virtio-blk,/usr/local/share/wifibox/disk.img -s 4:1,virtio-9p,config=/usr/local/etc/wifibox/appliance,ro -s 4:2,virtio-9p,var=/var/run/wifibox/appliance -s 4:3,virtio-9p,app_config=/usr/local/etc/wifibox/wpa_supplicant -s 5:0,e1000,tap0 -s 6:0,passthru,2/0/0 wifibox
2023-07-30T18:47:36-0400 DEBUG [bhyve] rdmsr to register 0x140 on vcpu 0
2023-07-30T18:47:36-0400 DEBUG [bhyve] rdmsr to register 0x34 on vcpu 0
2023-07-30T18:47:36-0400 INFO  Guest wifibox has started up
2023-07-30T18:47:36-0400 INFO  Guest is managed by PID 409
2023-07-30T18:47:36-0400 INFO  Bringing up Unix Domain Socket pass-through
2023-07-30T18:47:36-0400 INFO  Found guest IP address: 10.0.0.1
2023-07-30T18:47:36-0400 INFO  Configured sockets: [path=/var/run/wpa_supplicant/wlan0,user=root,group=0,mode=770,port=1200
path=/var/run/wpa_supplicant/p2p-dev-wlan0,user=root,group=0,mode=770,port=1201]
2023-07-30T18:47:36-0400 INFO  Hooking up 10.0.0.1:1200 as /var/run/wpa_supplicant/wlan0 (root:0@770)
2023-07-30T18:47:36-0400 INFO  Hooking up 10.0.0.1:1201 as /var/run/wpa_supplicant/p2p-dev-wlan0 (root:0@770)
2023-07-30T18:47:36-0400 INFO  End: wifibox start
2023-07-30T18:51:35-0400 DEBUG Program started as /usr/local/sbin/wifibox, with arguments: verison
2023-07-30T18:51:50-0400 DEBUG Program started as /usr/local/sbin/wifibox, with arguments: version
2023-07-30T18:51:50-0400 INFO  Begin: wifibox version
2023-07-30T18:51:50-0400 DEBUG version=0.11.0, checksum=8ea7e7a4a252171ae523aeb201282f7439104e9800c522d264b740ab9f346dd7
2023-07-30T18:51:50-0400 INFO  End: wifibox version

- /var/run/wifibox/appliance/log/dmesg

[    0.000000] Linux version 5.15.104-0-lts (pgj@wifibox-dev) (gcc (Alpine 12.2.1_git20220924-r4) 12.2.1 20220924, GNU ld (GNU Binutils) 2.39) #1-Alpine Sun, 26 Mar 2023 00:13:40 +0000
[    0.000000] Command line: console=ttyS0 BOOT_IMAGE=(host)/usr/local/share/wifibox/vmlinuz modules=squashfs root=/dev/vda rootfstype=squashfs clocksource=hpet tsc=unstable
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1360
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: FreeBSD BHYVE/BHYVE, BIOS 13.0 11/10/2020
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x8000 max_arch_pfn = 0x400000000
[    0.000000] Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F2400 000024 (v02 BHYVE )
[    0.000000] ACPI: XSDT 0x00000000000F2480 000044 (v01 BHYVE  BVXSDT   00000001 INTL 20201113)
[    0.000000] ACPI: APIC 0x00000000000F2500 00005A (v01 BHYVE  BVMADT   00000001 INTL 20201113)
[    0.000000] ACPI: FACP 0x00000000000F25D2 00010C (v05 BHYVE  BVFACP   00000001 INTL 20201113)
[    0.000000] ACPI: DSDT 0x00000000000F27D2 000A5C (v02 BHYVE  BVDSDT   00000001 INTL 20201113)
[    0.000000] ACPI: FACS 0x00000000000F2792 000040
[    0.000000] ACPI: FACS 0x00000000000F2792 000040
[    0.000000] ACPI: HPET 0x00000000000F2712 000038 (v01 BHYVE  BVHPET   00000001 INTL 20201113)
[    0.000000] ACPI: MCFG 0x00000000000F2752 00003C (v01 BHYVE  BVMCFG   00000001 INTL 20201113)
[    0.000000] ACPI: Reserving APIC table memory at [mem 0xf2500-0xf2559]
[    0.000000] ACPI: Reserving FACP table memory at [mem 0xf25d2-0xf26dd]
[    0.000000] ACPI: Reserving DSDT table memory at [mem 0xf27d2-0xf322d]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xf2792-0xf27d1]
[    0.000000] ACPI: Reserving FACS table memory at [mem 0xf2792-0xf27d1]
[    0.000000] ACPI: Reserving HPET table memory at [mem 0xf2712-0xf2749]
[    0.000000] ACPI: Reserving MCFG table memory at [mem 0xf2752-0xf278d]
[    0.000000] system APIC only can use physical flat
[    0.000000] Setting APIC routing to physical flat.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000007ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000007ffffff]
[    0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.000000] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] system APIC only can use physical flat
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-31
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x80860701 base: 0xfed00000
[    0.000000] [mem 0x08000000-0xffffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32000
[    0.000000] Kernel command line: console=ttyS0 BOOT_IMAGE=(host)/usr/local/share/wifibox/vmlinuz modules=squashfs root=/dev/vda rootfstype=squashfs clocksource=hpet tsc=unstable
[    0.000000] tsc: Marking TSC unstable due to boot parameter
[    0.000000] Unknown kernel command line parameters "BOOT_IMAGE=(host)/usr/local/share/wifibox/vmlinuz modules=squashfs", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 108968K/130684K available (8193K kernel code, 1465K rwdata, 1572K rodata, 724K init, 1768K bss, 21456K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[    0.000000] Console: colour EGA 80x25
[    0.000000] printk: console [ttyS0] enabled
[    0.000000] ACPI: Core revision 20210730
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 113919999973 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.007000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.008000] tsc: Detected 2492.392 MHz processor
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4984.78 BogoMIPS (lpj=2492392)
[    0.001004] pid_max: default: 32768 minimum: 301
[    0.002016] LSM: Security Framework initializing
[    0.003022] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.004005] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.005451] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006006] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.007012] CPU: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.008006] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.009006] Spectre V2 : Kernel not compiled with retpoline; no mitigation available!
[    0.009007] Spectre V2 : Vulnerable
[    0.010748] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.011005] Speculative Store Bypass: Vulnerable
[    0.012009] MDS: Mitigation: Clear CPU buffers
[    0.013004] MMIO Stale Data: Unknown: No mitigations
[    0.014005] SRBDS: Unknown: Dependent on hypervisor status
[    0.016020] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.120003] devtmpfs: initialized
[    0.120003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.120007] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.121152] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.122100] thermal_sys: Registered thermal governor 'step_wise'
[    0.122101] thermal_sys: Registered thermal governor 'user_space'
[    0.123012] cpuidle: using governor menu
[    0.124844] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.125005] ACPI: bus type PCI registered
[    0.126004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.127077] PCI: Using configuration type 1 for base access
[    0.129426] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.131128] ACPI: Added _OSI(Module Device)
[    0.132005] ACPI: Added _OSI(Processor Device)
[    0.132939] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.133005] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134005] ACPI: Added _OSI(Linux-Dell-Video)
[    0.134936] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.135007] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.136264] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.138105] ACPI: Interpreter enabled
[    0.138885] ACPI: PM: (supports S0 S5)
[    0.139005] ACPI: Using IOAPIC for interrupt routing
[    0.140022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.141063] ACPI: Enabled 1 GPEs in block 00 to 07
[    0.143911] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00])
[    0.144008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.145061] PCI host bridge to bus 0000:00
[    0.146005] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.147005] pci_bus 0000:00: root bus resource [io  0x0d00-0x1fff window]
[    0.148006] pci_bus 0000:00: root bus resource [io  0x2000-0x26bf window]
[    0.149005] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xc01fffff window]
[    0.150005] pci_bus 0000:00: root bus resource [mem 0x800000000-0x81fffffff window]
[    0.151005] pci_bus 0000:00: root bus resource [bus 00]
[    0.153090] pci 0000:00:00.0: [1275:1275] type 00 class 0x060000
[    0.154517] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.155742] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.156213] pci 0000:00:04.0: reg 0x10: [io  0x2600-0x267f]
[    0.157120] pci 0000:00:04.0: reg 0x14: [mem 0xc0034000-0xc0035fff]
[    0.159473] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.161615] pci 0000:00:04.1: [1af4:1009] type 00 class 0x010000
[    0.163068] pci 0000:00:04.1: reg 0x10: [io  0x2000-0x21ff]
[    0.164117] pci 0000:00:04.1: reg 0x14: [mem 0xc0036000-0xc0037fff]
[    0.166213] pci 0000:00:04.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.168344] pci 0000:00:04.2: [1af4:1009] type 00 class 0x010000
[    0.169213] pci 0000:00:04.2: reg 0x10: [io  0x2200-0x23ff]
[    0.171069] pci 0000:00:04.2: reg 0x14: [mem 0xc0038000-0xc0039fff]
[    0.172571] pci 0000:00:04.2: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.174052] pci 0000:00:04.3: [1af4:1009] type 00 class 0x010000
[    0.175213] pci 0000:00:04.3: reg 0x10: [io  0x2400-0x25ff]
[    0.176117] pci 0000:00:04.3: reg 0x14: [mem 0xc003a000-0xc003bfff]
[    0.177565] pci 0000:00:04.3: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.179700] pci 0000:00:05.0: [8086:100f] type 00 class 0x020000
[    0.181146] pci 0000:00:05.0: reg 0x10: [mem 0xc0000000-0xc001ffff]
[    0.182115] pci 0000:00:05.0: reg 0x14: [mem 0xc0020000-0xc002ffff]
[    0.183114] pci 0000:00:05.0: reg 0x18: [io  0x2680-0x2687]
[    0.184441] pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.186322] pci 0000:00:06.0: [14e4:4331] type 00 class 0x028000
[    0.187315] pci 0000:00:06.0: reg 0x10: [mem 0xc0030000-0xc0033fff 64bit]
[    0.188711] pci 0000:00:06.0: enabling Extended Tags
[    0.190667] pci 0000:00:06.0: supports D1 D2
[    0.191005] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.193662] pci 0000:00:1f.0: [8086:7000] type 00 class 0x060100
[    0.195530] pci 0000:00:1f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[    0.197096] pci_bus 0000:00: on NUMA node 0
[    0.197192] ACPI: PCI: Interrupt link LNKA configured for IRQ 5
[    0.198100] ACPI: PCI: Interrupt link LNKB configured for IRQ 6
[    0.199098] ACPI: PCI: Interrupt link LNKC configured for IRQ 7
[    0.200097] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[    0.201097] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.202087] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.203004] ACPI: PCI: Interrupt link LNKF disabled
[    0.204086] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.205004] ACPI: PCI: Interrupt link LNKG disabled
[    0.206086] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.207004] ACPI: PCI: Interrupt link LNKH disabled
[    0.208146] vgaarb: loaded
[    0.209023] pps_core: LinuxPPS API ver. 1 registered
[    0.210004] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.211008] PTP clock support registered
[    0.212111] NetLabel: Initializing
[    0.212833] NetLabel:  domain hash size = 128
[    0.213004] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.214019] NetLabel:  unlabeled traffic allowed by default
[    0.215027] PCI: Using ACPI for IRQ routing
[    0.216005] PCI: pci_cache_line_size set to 64 bytes
[    0.216283] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.217004] hpet0: 8 comparators, 32-bit 16.777216 MHz counter
[    0.221037] clocksource: Switched to clocksource hpet
[    0.222221] pnp: PnP ACPI init
[    0.223226] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.224489] system 00:02: [io  0x0400-0x0407] has been reserved
[    0.225750] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[    0.227202] pnp: PnP ACPI: found 8 devices
[    0.233482] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.235342] NET: Registered PF_INET protocol family
[    0.236432] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.238089] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.239838] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.241435] TCP established hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.243061] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.244550] TCP: Hash tables configured (established 1024 bind 1024)
[    0.245907] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.247275] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.248764] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.250198] pci 0000:00:04.0: BAR 6: assigned [mem 0xc003c000-0xc003c7ff pref]
[    0.251722] pci 0000:00:04.1: BAR 6: assigned [mem 0xc003c800-0xc003cfff pref]
[    0.253223] pci 0000:00:04.2: BAR 6: assigned [mem 0xc003d000-0xc003d7ff pref]
[    0.254741] pci 0000:00:04.3: BAR 6: assigned [mem 0xc003d800-0xc003dfff pref]
[    0.256247] pci 0000:00:05.0: BAR 6: assigned [mem 0xc003e000-0xc003e7ff pref]
[    0.257767] pci 0000:00:1f.0: BAR 6: assigned [mem 0xc003e800-0xc003efff pref]
[    0.259263] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.260575] pci_bus 0000:00: resource 5 [io  0x0d00-0x1fff window]
[    0.261875] pci_bus 0000:00: resource 6 [io  0x2000-0x26bf window]
[    0.263170] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xc01fffff window]
[    0.264625] pci_bus 0000:00: resource 8 [mem 0x800000000-0x81fffffff window]
[    0.266403] pci 0000:00:1f.0: Activating ISA DMA hang workarounds
[    0.267976] PCI: CLS 256 bytes, default 64
[    0.268918] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 163840 ms ovfl timer
[    0.270735] Initialise system trusted keyrings
[    0.272214] workingset: timestamp_bits=62 max_order=15 bucket_order=0
[    0.274979] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.276372] 9p: Installing v9fs 9p2000 file system support
[    0.289885] Key type asymmetric registered
[    0.290784] Asymmetric key parser 'x509' registered
[    0.292142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.293796] ACPI: button: Power Button [PWRF]
[    0.295322] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    0.297273] virtio-pci 0000:00:04.1: virtio_pci: leaving for legacy driver
[    0.299138] virtio-pci 0000:00:04.2: virtio_pci: leaving for legacy driver
[    0.300933] virtio-pci 0000:00:04.3: virtio_pci: leaving for legacy driver
[    0.302689] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.304318] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.306199] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.308013] 00:05: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.309821] 00:06: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[    0.311811] Non-volatile memory driver v1.3
[    0.313957] loop: module loaded
[    0.315775] virtio_blk virtio0: [vda] 16960 512-byte logical blocks (8.68 MB/8.28 MiB)
[    0.320293] e1000: Intel(R) PRO/1000 Network Driver
[    0.321376] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.732765] e1000 0000:00:05.0 eth0: (PCI:33MHz:32-bit) 00:a0:98:8a:05:71
[    0.734328] e1000 0000:00:05.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.736209] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.738352] i8042: Warning: Keylock active
[    0.740427] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.741601] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.743719] rtc_cmos 00:07: registered as rtc0
[    0.744969] rtc_cmos 00:07: alarms up to one day, y3k, 114 bytes nvram
[    0.746696] Initializing XFRM netlink socket
[    0.747782] NET: Registered PF_INET6 protocol family
[    0.749267] Segment Routing with IPv6
[    0.750181] In-situ OAM (IOAM) with IPv6
[    0.751169] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.752712] NET: Registered PF_PACKET protocol family
[    0.753914] 9pnet: Installing 9P2000 support
[    0.757318] registered taskstats version 1
[    0.758309] Loading compiled-in X.509 certificates
[    0.759653] printk: console [netcon0] enabled
[    0.760693] netconsole: network logging started
[    0.761788] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    0.763928] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    0.765440] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    0.767898] cfg80211: failed to load regulatory.db
[    0.770665] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    0.772464] devtmpfs: mounted
[    0.773270] Freeing unused kernel image (initmem) memory: 724K
[    0.774522] Write protecting the kernel read-only data: 12288k
[    0.776131] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.777605] Freeing unused kernel image (rodata/data gap) memory: 476K
[    0.778966] Run /sbin/init as init process
[    0.779845]   with arguments:
[    0.779846]     /sbin/init
[    0.779846]   with environment:
[    0.779847]     HOME=/
[    0.779847]     TERM=linux
[    0.779848]     BOOT_IMAGE=(host)/usr/local/share/wifibox/vmlinuz
[    0.779849]     modules=squashfs
[    2.662585] wl: loading out-of-tree module taints kernel.
[    2.662593] wl: module license 'MIXED/Proprietary' taints kernel.
[    2.662594] Disabling lock debugging due to kernel taint
[    2.666704] wl 0000:00:06.0: can't derive routing for PCI INT A
[    2.666708] wl 0000:00:06.0: PCI INT A: not connected
[    2.796902] wl 0000:00:06.0: MSI supported: true
[    2.797320] wl 0000:00:06.0: (MSI) allocated 1 IRQ vectors
[    2.797323] wl 0000:00:06.0: (MSI) requesting IRQ: 40
[    2.826170] wlan0: Broadcom BCM4331 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[    2.826173] 


- /var/run/wifibox/appliance/log/messages

Jul 30 22:47:38 wifibox syslog.info syslogd started: BusyBox v1.35.0
Jul 30 22:47:38 wifibox daemon.info supervise-daemon[782]: Supervisor command line: supervise-daemon wpa_supplicant --start --respawn-delay 2 --respawn-max 5 --respawn-period 1800 /sbin/wpa_supplicant -- -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf 
Jul 30 22:47:38 wifibox daemon.info supervise-daemon[786]: Child command line: /sbin/wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf 
Jul 30 22:47:44 wifibox daemon.info supervise-daemon[930]: Supervisor command line: supervise-daemon uds_passthru --start --respawn-delay 2 --respawn-max 5 --respawn-period 1800 /sbin/uds_passthru -- 
Jul 30 22:47:44 wifibox daemon.info supervise-daemon[934]: Child command line: /sbin/uds_passthru 
Jul 30 22:47:44 wifibox daemon.info : starting pid 937, tty '': '/sbin/openrc default'
Jul 30 22:47:44 wifibox daemon.debug uds_passthru[934]: Configuration: network=10.0.0.1:255.255.255.0, sockets=[path=/var/run/wpa_supplicant/wlan0,user=root,group=0,mode=770,port=1200 path=/var/run/wpa_supplicant/p2p-dev-wlan0,user=root,group=0,mode=770,port=1201]
Jul 30 22:47:44 wifibox daemon.info uds_passthru[934]: Associating 10.0.0.1:1200 (10.0.0.1:255.255.255.0) with /var/run/wpa_supplicant/wlan0 (/tmp/tmp.hpCGcE/tmp.aFcCeC)
Jul 30 22:47:44 wifibox daemon.warn uds_passthru[934]: /var/run/wpa_supplicant/p2p-dev-wlan0 is not available, skipping.
Jul 30 22:47:44 wifibox daemon.info uds_passthru[934]: Waiting for PID 945 to stop.
Jul 30 22:47:44 wifibox cron.info crond[994]: crond (busybox 1.35.0) started, log level 8
Jul 30 22:47:44 wifibox daemon.info udhcpd[1047]: started, v1.35.0
Jul 30 22:47:44 wifibox daemon.err udhcpd[1047]: can't open '/var/lib/misc/udhcpd.leases': No such file or directory
Jul 30 22:47:45 wifibox daemon.info : starting pid 1054, tty '/dev/ttyS0': '/sbin/getty -L ttyS0 115200 vt100'
Jul 30 22:55:54 wifibox auth.info login[1054]: root login on 'ttyS0'

Additional context

Let me know if you need any other information.

Have you tried to turn it on and off?

• Yes, I have read all the manual pages first!