homeassistant-midea-air-appliances-lan: Temp changing doesn't work
Version of the custom_component
Configuration
Add your logs here.
Describe the bug
A clear and concise description of what the bug is.
Every option for the AC is working except changing the temperature. When I am changing it with HA, the new value isn’t send to the AC. But when I change it with the app, Also when I am changing the temp value with the app (mssmarthome) it doesn’t change on HA side.
Debug log
Add your logs here.
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Reactions: 1
- Comments: 28 (3 by maintainers)
I may continue to work on the issue if there are people interested in it. The other integration seems to cover quite a number of midea devices and is very interesting for ACs. I propose people vote with up/down on this comment. Up if they want me to continue work on it/down if they think that switching to other integration is better way forward.
@nbogojevic OK, here are some logs after various actions. Some with errors, some with correct results. I tried to add comments to logs. Feel free to ask for further information.
In short:
This is the link to the integration:
https://github.com/georgezhao2010/midea_ac_lan
Same issue here with midea airconditioner Not able to change the temperature from HA although if changed by remote it changes on HA
@nbogojevic Thank you for the new version and your effort. However, the new version works a bit worse than previous 😃 Run status sporadically changes to false while AC is running steadily. My observations are below:
Air conditioner running without any change, but run_status sometimes changes to false for no reason:
At 10:09:44 status was reported correctly. At 10:10:00 target temperature was increased from 24 to 25 using remote controller. No immediate change reported, so I guess we need to wait for the next poll interval? At 10:10:44 run status incorrectly reports as false and target temperature also incorrectly reports 16. Next poll interval at 10:11:44 also reports incorrectly, whila the one at 10:12:44 finally updates correctly. Then there is new LAN discovery process. I don’t know what has initiated it. However, after it, there is an incorrect status report, followed by the correct one one minute later. During all this time I did not change anything on the AC.
At 10.21.04 i tried changing target temperature from 25 to 23 using HA card. It immediately jumped back to 25 and, of course, it did not change on AC.
P.S. Local IP address is not obfuscated in discovery process [midea_beautiful.scanner]. I don’t have any issues with sharing a private IP, so I have left it as is.
Thank you for your effort @nbogojevic. The sync from the AC to HA is working fine now, except the temp change from HA to AC isn’t still working. I’ve some loggings that I have after trying to change temp in HA:
2022-08-24 20:36:24.633 DEBUG (MainThread) [midea_beautiful] Library version=0.9.15 2022-08-24 20:36:24.633 DEBUG (MainThread) [midea_beautiful] Scanning for midea dehumidifier appliances via [‘255.255.255.255’, ‘192.168.2.5’] 2022-08-24 20:36:24.634 DEBUG (MainThread) [midea_beautiful.scanner] Starting LAN discovery 2022-08-24 20:36:24.635 DEBUG (MainThread) [midea_beautiful.scanner] Broadcast attempt 1 of max 1 2022-08-24 20:36:24.635 DEBUG (MainThread) [midea_beautiful.scanner] Broadcasting to 255.255.255.255 2022-08-24 20:36:24.636 DEBUG (MainThread) [midea_beautiful.scanner] Broadcasting to 192.168.2.5 2022-08-24 20:36:24.668 DEBUG (MainThread) [midea_beautiful.scanner] Reply from address=192.168.2.51 payload=b’\x83p\x00\xb8 \x0f\x04\x18ZZ\x01\x11\xa8\x00z\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xff,\x03\x00\x00\x11\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xac\x8e\xbe\xf17\t\x08\xbe"\x1a\xa6e\xa9\x98QV\xda\xa5\xb3\x7f\np\x07\xd7\xce\x0f\x10V,\xf9]\xae \x9e\xea\x1b\x00<u\x8c]\xec \x85\x9f[\xd4:\x90]\xc7p,8\xe8\xb0\xf5\xf1\xce\xc3\xbd\x05\xb7y\x91\xf1\xade\xa7\x8b\x1e'\x8a\x1c\xb0\xc4b&\r>\x90\xb1;\xe0\x00\x89G\x15\xb6\x06\x12~\x07\xc2\xfe\xcf\xf3\x14C\xd1|:\xac\x03\xa7ef\x14\xae\x1d\xcaD\xfa\x10\xbd\xda"\xd77:\x17]\xb1\x17\xec5\xa5\x1b\x06\xfd:b\x1d6\xe8\x84\x87\xe9\x05\xc3\W\x89\xbf’ 2022-08-24 20:36:24.670 DEBUG (MainThread) [midea_beautiful.lan] From 192.168***** decrypted reply=b’3\x02\xa8\xc0,\x19\x00\x00000000P0000000Q130B23749A5710000\x0bnet_ac_A571\x00\x00\x00\x00\x01\x00\x00\x00\x04\x00\x00\x00\x00\x00\xac\x00\x00\x00\x00\x00\x00\x000\xb27I\xa5q\x06\x9f\xcd\x03\x00\x08\x01\x03\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00’ 2022-08-24 20:36:24.671 DEBUG (MainThread) [midea_beautiful.appliance] Creating AirConditionerAppliance 1869169788**** 2022-08-24 20:36:24.676 DEBUG (MainThread) [midea_beautiful.lan] Descriptor data ‘{id=1869169788****, address=192.168*****, port=6444, version=3, name=18691697880319, online=True, type=0xac, subtype=0, flags=0, extra=1, reserved=0, mac=30b2374*****, ssid=net_ac_A571, udp_version=4000000, protocol=069fcd, version=3.0.8, sn=000000P0000000Q130B23749********, state=[Air conditioner]{id=1869169788****, type=0xac mode=0, running=False, turbo=False, fan_speed=40, turbo_fan=False, purifier=False, dryer=False, target_temperature=0, indoor_temperature=2.2250738585072014e-308, outdoor_temperature=2.2250738585072014e-308, vertical_swing=False horizontal_swing=False comfort_sleep=False, error_code=0, prompt=False, supports={}}}’ 2022-08-24 20:36:25.677 DEBUG (MainThread) [midea_beautiful.scanner] Finished broadcast collection 2022-08-24 20:36:25.678 DEBUG (MainThread) [midea_beautiful.scanner] Found 1 appliance(s)
22-08-24 20:30:10.433 DEBUG (SyncWorker_8) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b’\x83p\x00@ \x01\x00\x00\xc4\xdf\xaf\x9ao\xce\x7f\xe7!7\xeeL\xb3\xabZ\xd5\x04^\xda\n\xfb\xd1EZM\xa2\xbe\xe2=9\xcf\x00)\xe9a\xac\xea\x08\x9cj\x129\xd6?Xra\x12\xadC\x18\x9a>\xb2\xb1\xcc\x00(\x05\xcb
\xa8\xfc\xee' 2022-08-24 20:30:10.436 DEBUG (SyncWorker_8) [midea_beautiful.lan] Got TCP key for: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 20:30:10.939 DEBUG (SyncWorker_8) [midea_beautiful.lan] Sending to sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b'\x83p\x00\x8e f\x90y\x18\xcc\xe5\xac\xee\x0eR\x19Q\x91E\x1dJ-\x92\x12FY\xb5\x9f\xf3p\xcc\xfb/k\xda\xdc1<\x90b,\xc4\x7f\x8bz\x04\xb1\x8dBH/r\xc4X\xcb\x93\x08\xbd\'\xa2q\n\xdf\xab\x1b\xb7ya \xb1\x94\x1d\x02\xe1U\xe9.\t"j\xedo\xd8\x8b\xb4\xe1-\xcf1\xe40\xad\xd9\xef\x85a2\xc35\x15\xa7\xe3\xa0EAsu\x84,3\xc9\n\x8c\x8c\x97\xdb\xa9\xc3R\xacq\xde\xd5\x8c\x8f\x84\x01\xa4\xc0\xb4\xe3\xec\x863\xef\xca\xbaQ\x819\xef!q\x03\x03\x98\x01\x9b\\\xf1' 2022-08-24 20:30:11.695 DEBUG (SyncWorker_8) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b"\x83p\x00\x8e c\x8c\xcd\xa3\x17ta\x809\xcc\xf3\r\x88C\x1c\xaa\xa9\x977\x94\xf6\xf0\xb8_\x1d\x04\xc7!\x96\x97\xf9}\\\xb2\xed\n'\x8coY\xe1$\xf7\x0c\x8a\x1a\x82\xb9\x87\x92B\xca\xb6\xe2\xe1\xfd\x93.\xc0\xe5>\xd4\x1f>\xcc}\xe8\xa0\xf3\xed\xf4!Cag#\xf8bw<\xe4\x85\x86\x918\x9fM\x8e7\x8e\x95-r\xff'\xaa\xff\x89\x17
B{\xf6.\xff\x102H\x13\xe2\xcd\xear\xca\xd1Y\xd0\xd8\x8ez\xdc\x14\xf6\x07}<\xa0 \xc9:\x96?\xb6\xd4&\x0e\xbf!\xda\x1e\x8b\x88d\xcf\xb0" 2022-08-24 20:30:11.699 DEBUG (SyncWorker_8) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 20:30:11.699 DEBUG (SyncWorker_8) [midea_beautiful.lan] refresh sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 responses=[b’\xaa"\xac\x00\x00\x00\x00\x00\x03\x03\xc0\x01AP\x7f\x7f\x003\x00\x00\x02ei\x00\x00\x00\x00\x00\x00\x00\x00\x00\x8d-\x1f’] 2022-08-24 20:30:11.700 DEBUG (SyncWorker_8) [midea_beautiful.appliance] AirConditionerResponse {‘run_status’: True, ‘i_mode’: False, ‘timing_mode’: False, ‘quick_check’: False, ‘appliance_error’: False, ‘mode’: 2, ‘target_temperature’: 17.0, ‘fan_speed’: 80, ‘on_timer_set’: False, ‘on_timer_hours’: 31, ‘on_timer_minutes’: 45, ‘off_timer_set’: False, ‘off_timer_hours’: 31, ‘off_timer_minutes’: 45, ‘vertical_swing’: 0, ‘horizontal_swing’: 3, ‘comfort_sleep_value’: 0, ‘power_saving’: False, ‘low_frequency_fan’: False, ‘turbo_fan’: False, ‘feel_own’: False, ‘comfort_sleep’: False, ‘natural_wind’: False, ‘eco’: False, ‘purifier’: False, ‘dryer’: False, ‘ptc’: 0, ‘aux_heat’: False, ‘turbo’: True, ‘fahrenheit’: False, ‘prevent_freezing’: False, ‘pmv’: -3.5, ‘outdoor_temperature’: 27.5, ‘indoor_temperature’: 25.5, ‘err_code’: 0, ‘humidity’: 0} 2022-08-24 20:30:11.702 DEBUG (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Finished fetching Airco gang data in 1.700 seconds (success: True)This is what I see when I am trying to change the fan mode:
22-08-24 20:44:12.170 DEBUG (SyncWorker_7) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b’\x83p\x00\x8e c\x8c
\xd1\x7f\xcf+\xc9\xe3\xee\xfd\xd1\xf7\x942\x04\x82\xe2\xe4\xf1\xafe\\z\x0eH\x03o T.\xd6\x92\x85|\xd3P\t\xa1Q\xcfF a\x81R|\xa9\xa46H\x03I>\xb91\x1e\n\xd3\x07\xba\xce\x8a \x11M\x13\xd7\xd3\xf4\xc6O\xdcxW*{J(ir\x87\xe7\xc5\xdbEIk\x82\x01K\x98$\xecV\x8f2\xde\xa6\xad\x00\x8b^ \xffH\x8c*"\x8a\xa2\xfc\xed\xc2\xe8z\xc69\xca\xede|5\xb2R(2\xc5\tO,\x8c!\x99KK]\xa0\x1c\x99U\x8f%\xe3\x07' 2022-08-24 20:44:12.173 DEBUG (SyncWorker_7) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 20:44:12.173 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x12\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x13\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x14\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x15\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x16\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x17\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.appliance] Got capability b'\x1a\x02' 2022-08-24 20:44:12.174 DEBUG (SyncWorker_7) [midea_beautiful.lan] Getting more capabilities 2022-08-24 20:44:12.177 DEBUG (SyncWorker_7) [midea_beautiful.lan] Packet for: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 data=b'ZZ\x01\x11H\x00 \x00\x00\x00\x00\x00\x11\x0c,\x14\x18\x08\x16\x14\xff,\x03\x00\x00\x11\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xeb7\xbbe\xdalO\xff\x96!\xa6\xad\x11\x1d|\x04(\xa2\x9d\xc8L_\x93b\xdd\xe1\xa66\xfb\\>\xa4' 2022-08-24 20:44:12.179 DEBUG (SyncWorker_7) [midea_beautiful.lan] Sending to sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b'\x83p\x00n fj\xc2\xd6 \x1f\x92\xe8\xdd\xb96)\xa98D\xcd-\xa9P\xebq4\xcaV\x95~t\xcc\x9d\x1c\\\x06\xd1\xb5d\x05\x0clEj\xd1\x12P\xf7\xae\xb5
F\x14\x8d\xbb\xf7\xd4\xee0_NGi\x18\xe1~\x0cG\xeb\x11\xd6\xe2K\x8d8yW\x06\\x926\x10\x0c\xa3\xc6\xd3\xe7\x02\x0b`+\x14\xe8\xa0\x15\xc5e^X\xcc\x8cR0<\xbf\x8c\x1e&\xad\xf8\xbcCw\xb3\xf5\xd0c’This is what I see when I am trying to change the Preset mode to Sleep mode:
2022-08-24 20:50:50.768 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b"\x83p\x00\x8e c\xba\xb6V>/>1\xde\x8e\xa0\x16&\x8b\xbb\x9b\xd1\x15\x1a’mow<\xabU\xd6Ic\n\xbe\xe9Kz\x95\xbd\xc2,2\x8c\xfc\xcbD\xa6=\x08Xi\xb4\xad\x1fq\xea!\xdd\x0e\x08\x96N-0\x06\xab!q\xf1\xbd\xe7\x1d\xa6\x83=J\x91\x00GXW\xef\xa9\x08\r\r\x9f\x0b\xb0*\xeeV?J\xd4\x95\x9d\xef5L\x01d^\xcfF\xc2\x928\xfb\xa8H<3\xf8$\x92\xdf\xe8\xf3/\x04\x8eu\x9bkr\xdd\xf4.\xd7\xb4\x94\x83m(\t\xeeO\x8c\xea\x95.\x83\xa5\x8ez\x0e\x1d" 2022-08-24 20:50:50.770 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got response(s) from: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 20:50:50.771 DEBUG (SyncWorker_2) [midea_beautiful.lan] apply sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 responses=[b’\xaa"\xac\x00\x00\x00\x00\x00\x03\x02\xc0\x01AP\x7f\x7f\x003\x00\x00\x02dg\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x06\xd7’] 2022-08-24 20:50:50.771 DEBUG (SyncWorker_2) [midea_beautiful.lan] Using refresh after apply 2022-08-24 20:50:50.775 DEBUG (SyncWorker_2) [midea_beautiful.lan] Packet for: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 data=b’ZZ\x01\x11h\x00 \x00\x00\x00\x00\x00M22\x14\x18\x08\x16\x14\xff,\x03\x00\x00\x11\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00k\x00\nv\xe2~\xed,6G\xe5}\x86\x02\xdf\x8b\xeeA\xb9\x93\s=\xa6#\x9en\xdf\x91"\x86\x90\xb8\x90B\xd6\xde\x1a,\xff\xd1gEfW\xd3\xf7\x12(\xc8\x85\x91\xb3\x8cM\x8bg\x99\xd9\x7f $K\x7f’ 2022-08-24 20:50:50.777 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b"\x83p\x00\x8e fW\xcc7W!\xda\x9c\xc0\x8a\xc0c\xc4=\xa2S\xd0&\x1bx\xb5D\xd57c\x85q\xd7\xebvc\xa1{I\x1c\x1e\xcf!~\xc4M’v\xe5\x9c>;\t\xe0\xe0\xa0\xcfv\xac\x98\xd7+\x857\n.\x8e\xe3_\x00\xc1\xf5\xdf\x1f\xcfe\x1cf\n1\x1a\x16\xe4\xc7\xeb\x0c\xdc\xfd\xab\xbaq(\xed\xa7\x97C\x1a\xf2\x9e\xc1\xf5\x8aC\xe1z\x1d\xab\xc5H6\xaf\x9eX3\xcf\x0f#\x1f\xee\x1e\x9bh\x00uj\xee\xceg\xba\rnZ\x05\x82_\xd8\xe7\xdcy\xc0\t0\x84G\xd6h\xf7#\xc9\x86" 2022-08-24 20:50:51.507 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b’\x83p\x00\x8e cb\x063 . &\xb2\x11Y\x1b\x8d\x1a\xbe/\xaf\x13\xbf3y|D\xb4\x19x^\xc7+/\x7f\x07i\xf2\x84\xd1\x0f\xc2\x08\xf6\xcb\x01\xf5Ck\x94r\xfc\xc1\xde\x94+\xae,\x89}“\x08\xe2\x9d2\xbe\x85y^i0\x97x\xd7\xbfo\xca"e\xe8D\xc8\xc6!\xc0m\xa6na\xf1\xba(\xa5\xfa\xc0\x97\xc7\xa7l\xe8\x0e\x05\t\xb6\xcd\xfbK\x11\xe5\x9aB\xa4\xf5\x0c\xd9O\xeb)\xb30\xab*\x81|\x92\x03\xb7\x1dE\xd4\x8dxN \xf6\xe7BS\x06\xa8\xf8\xa7\xbe\xfbE7\x81\xed9’ 2022-08-24 20:50:51.511 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 20:50:51.512 DEBUG (SyncWorker_2) [midea_beautiful.lan] refresh sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 responses=[b’\xaa”\xac\x00\x00\x00\x00\x00\x03\x03\xc0\x01AP\x7f\x7f\x003\x00\x00\x02dg\x00\x00\x00\x00\x00\x00\x00\x00\x00\x91I\x02’] 2022-08-24 20:50:51.512 DEBUG (SyncWorker_2) [midea_beautiful.appliance] AirConditionerResponse {‘run_status’: True, ‘i_mode’: False, ‘timing_mode’: False, ‘quick_check’: False, ‘appliance_error’: False, ‘mode’: 2, ‘target_temperature’: 17.0, ‘fan_speed’: 80, ‘on_timer_set’: False, ‘on_timer_hours’: 31, ‘on_timer_minutes’: 45, ‘off_timer_set’: False, ‘off_timer_hours’: 31, ‘off_timer_minutes’: 45, ‘vertical_swing’: 0, ‘horizontal_swing’: 3, ‘comfort_sleep_value’: 0, ‘power_saving’: False, ‘low_frequency_fan’: False, ‘turbo_fan’: False, ‘feel_own’: False, ‘comfort_sleep’: False, ‘natural_wind’: False, ‘eco’: False, ‘purifier’: False, ‘dryer’: False, ‘ptc’: 0, ‘aux_heat’: False, ‘turbo’: True, ‘fahrenheit’: False, ‘prevent_freezing’: False, ‘pmv’: -3.5, ‘outdoor_temperature’: 26.5, ‘indoor_temperature’: 25.0, ‘err_code’: 0, ‘humidity’: 0} 2022-08-24 20:50:51.520 DEBUG (SyncWorker_8) [midea_beautiful.lan] Packet for: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 data=b’ZZ\x01\x11h\x00 \x00\x00\x00\x00\x00332\x14\x18\x08\x16\x14\xff,\x03\x00\x00\x11\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00k\x00\nv\xe2~\xed,6G\xe5}\x86\x02\xdf\x8b\r\x91:\x99\xacf\xbb\xc2\xc01\x87Y\x85\xfe\xa6e\xa6\xbd^\x96\xea\x81\xa1\xe4\xd9f\xd52\xe6Uz\xeef\x13b\x05\xad\xa8^?R6\xaa\xce\xf4\x19\xc2y’ 2022-08-24 20:50:51.521 DEBUG (SyncWorker_8) [midea_beautiful.lan] Sending to sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b’\x83p\x00\x8e f\xa5\xbf|\xd0\xbb66r\xb9D*\xd0\xdc\xa8\xb2\x81\x10!\x96g\x8d\xaf\xdcu\x15,\xfa\xec\x06\x93'{7\x84k\xe6\x01\xcfps\x14\xae\xbc+\xf6\xb0\x10\x92\x16\xb4#\x08/\xe5\x1c\xe5+\x13\xc9V\x05|`8C\x94\xd2B\x14\xc4\x1a\x06=\xfd\xf7\xf8\xb9\xf5w"\x16\xed~t~\xd6y\xc1\xbbQ{\x86\xe0\x89\xc4\x85D.e\xbc\x10e\x9c\xa6\xc6\xee\x02lA/\xa6\xcf\xf2U{~\x0e\x841\xeep\xa1\xb8 @U\xb8\xa4\x93\xfc\xa9\xb3\xe4|\xc6!\xc0\xdec\xff\n\xaey\x01’
2022-08-24 21:01:32.545 DEBUG (SyncWorker_8) [midea_beautiful.lan] From sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3, message=b’\x83p\x00\x8e c\x96\x0e\xd7\x17V\xe3\xb9\x8cSm\xc2\xafU\xfb\xc6\x1b\x98\x9cKiv\xba\x01\xac\xfe\x04\x94\xa9oG\xa6\xf3\xa9\x0c1\x00\xca\x1d\x04)o\xc9@\xd8p\x81.\n\xd9j\xd0G.7\xef\x19\xca95\x11\x99B\x9f\xfeT\xec\x96\xf4J\xe1\xeb|d\xee\x96\x1e\x1dg\xa6\xaeF_\xf3\x1d\x01]]0s\xe6&\xb9\x90\x82_\xc1`\xdb\xae\xda.\x9d\x0f\x1cQ\xb5T\xab\xc6\x13\xd4\xad\xda\x04\xf4\xad\x15\xfd\x93\xf9\xd2Br\xdb\x87Z\xf3\xb1\xc8+\x87\x8b\xc6\xd7\x1c\xdd/\xb1\x8b]i\xbf\x98\x15’ 2022-08-24 21:01:32.549 DEBUG (SyncWorker_8) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 2022-08-24 21:01:32.549 DEBUG (SyncWorker_8) [midea_beautiful.lan] refresh sn=000000P0000000Q130B23749******** id=1869169788**** address=192.168***** version=3 responses=[b’\xaa"\xac\x00\x00\x00\x00\x00\x03\x03\xc0\x01AP\x7f\x7f\x003\x00\x00\x02cg\x00\x00\x00\x00\x00\x00\x00\x00\x00C\xa3\xf7’] 2022-08-24 21:01:32.550 DEBUG (SyncWorker_8) [midea_beautiful.appliance] AirConditionerResponse {‘run_status’: True, ‘i_mode’: False, ‘timing_mode’: False, ‘quick_check’: False, ‘appliance_error’: False, ‘mode’: 2, ‘target_temperature’: 17.0, ‘fan_speed’: 80, ‘on_timer_set’: False, ‘on_timer_hours’: 31, ‘on_timer_minutes’: 45, ‘off_timer_set’: False, ‘off_timer_hours’: 31, ‘off_timer_minutes’: 45, ‘vertical_swing’: 0, ‘horizontal_swing’: 3, ‘comfort_sleep_value’: 0, ‘power_saving’: False, ‘low_frequency_fan’: False, ‘turbo_fan’: False, ‘feel_own’: False, ‘comfort_sleep’: False, ‘natural_wind’: False, ‘eco’: False, ‘purifier’: False, ‘dryer’: False, ‘ptc’: 0, ‘aux_heat’: False, ‘turbo’: True, ‘fahrenheit’: False, ‘prevent_freezing’: False, ‘pmv’: -3.5, ‘outdoor_temperature’: 26.5, ‘indoor_temperature’: 24.5, ‘err_code’: 0, ‘humidity’: 0}
Same for my Midea Mission Inverter MB12N8D6WIK. Integration becomes unavailable after changing temperature. At least, with the recent update turnig it on or off as well as getting the current status seems to work more reliably.
Here are some DEBUG logs in idle state (when AC is turned off and no command is being sent). I’m willing to provide logs in other circumstances (e.g. when changing temp) in order to improve the integration.
I have the same issue on my Kaisai One 18.