WSL: Executing a symlink to a windows executable does nothing

Hello, the pathology I am seeing is identical to that reported in the following: https://github.com/Microsoft/WSL/issues/3424 Except it’s a year later and clearly a different underlying issue. I have added a report to that issue, but it’s closed, so I thought I would open a new issue. I don’t know if you’d prefer to proceed in one or the other. This was working for me as recently as a few weeks ago ( say, 3/31/19 ).

I am running 10.0.18362.53

Please fill out the below information:

  • Your Windows build number: (Type ver at a Windows Command Prompt) 10.0.18362.53

  • What you’re doing and what’s happening: (Copy&paste the full set of specific command-line steps necessary to reproduce the behavior, and their output. Include screen shots if that helps demonstrate the problem.) I have a windows executable installed in program files cd /usr/local/bin bin$ sudo ln -s “/mnt/c/Program Files/Sublime Text 3/sublime_text.exe” subl bin$ ls -l total 0 lrwxrwxrwx 1 root root 52 Apr 25 12:28 subl -> ‘/mnt/c/Program Files/Sublime Text 3/sublime_text.exe’ bin$ ./subl

—> this should pop up a windows window, it doesn’t

  • What’s wrong / what should be happening instead: Executing the soft link should execute the windows program. If I execute the command directly, it works fine

  • Strace of the failing command, —> there’s an EBADF near the bottom that shows there’s a problem instead of a reasonable launch —> sorry about the bad formatting. Not sure what I’m falling afoul of. Carriage returns and line feeds, I expect.

bbulk$ cat subl3.strace                                                                                                                                  2329  execve("/usr/local/bin/subl3", ["subl3"], 0x7fffeb0744e8 /* 26 vars */) = 0                                                                        2329  arch_prctl(ARCH_SET_FS, 0x293820) = 0                                                                                                              2329  set_tid_address(0x293858)         = 2329                                                                                                           2329  brk(NULL)                         = 0xd11000                                                                                                       2329  brk(0xd12000)                     = 0xd12000                                                                                                       2329  sched_getaffinity(0, 128, [0, 1, 2, 3, 4, 5, 6, 7]) = 64                                                                                           2329  uname({sysname="Linux", nodename="ASPARTAME", ...}) = 0                                                                                            2329  getpid()                          = 2329                                                                                                           2329  getcwd("/mnt/c/Users/bbulk", 4096) = 19                                                                                                            2329  open("/dev/lxss", O_RDWR)         = 3                                                                                                              2329  ioctl(3, _IOC(0, 0, 0x2f, 0x22), 0x7fffe43e54c8) = 0                                                                                               2329  getcwd("/mnt/c/Users/bbulk", 4096) = 19                                                                                                            2329  open("/proc/self/mountinfo", O_RDONLY) = 5                                                                                                         2329  readv(5, [{iov_base="", iov_len=0}, {iov_base="2 2 0:2 / / rw,noatime - lxfs ro"..., iov_len=1024}], 2) = 932                                      2329  readv(5, [{iov_base="", iov_len=0}, {iov_base="", iov_len=1024}], 2) = 0                                                                           2329  close(5)                          = 0                                                                                                              2329  getcwd("/mnt/c/Users/bbulk", 4096) = 19                                                                                                            2329  open("/proc/self/mountinfo", O_RDONLY) = 5                                                                                                         2329  readv(5, [{iov_base="", iov_len=0}, {iov_base="2 2 0:2 / / rw,noatime - lxfs ro"..., iov_len=1024}], 2) = 932                                      2329  readv(5, [{iov_base="", iov_len=0}, {iov_base="", iov_len=1024}], 2) = 0                                                                           2329  close(5)                          = 0                                                                                                              2329  ioctl(0, TCGETS, {B38400 opost isig icanon echo ...}) = 0                                                                                          2329  ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0                                                                                          2329  ioctl(2, TCGETS, {B38400 opost isig icanon echo ...}) = 0                                                                                          2329  ioctl(0, TIOCGPGRP, [2327])       = 0                                                                                                              2329  getpgid(0)                        = 2327                                                                                                           2329  fstat(0, {st_mode=S_IFCHR|0660, st_rdev=makedev(4, 1), ...}) = 0                                                                                   2329  fstat(1, {st_mode=S_IFCHR|0660, st_rdev=makedev(4, 1), ...}) = 0                                                                                   2329  fstat(2, {st_mode=S_IFCHR|0660, st_rdev=makedev(4, 1), ...}) = 0                                                                                   2329  ioctl(0, TIOCGWINSZ, {ws_row=30, ws_col=120, ws_xpixel=0, ws_ypixel=0}) = 0                                                                        2329  ioctl(0, SNDCTL_TMR_START or TCSETS, {B38400 -opost -isig -icanon -echo ...}) = 0                                                                  2329  dup(0)                            = 5                                                                                                              2329  ioctl(4, _IOC(0, 0, 0xb7, 0x22), 0x7fffe43e5478) = 0                                                                                               2329  ioctl(4, _IOC(0, 0, 0xb7, 0x22), 0x7fffe43e5478) = 0                                                                                               2329  ioctl(4, _IOC(0, 0, 0xb7, 0x22), 0x7fffe43e5478) = 0                                                                                               2329  write(4, "\0\0\0\0\301\0\0\0\16\0\0\0\0\0\0\0\17\0\0\0\0\0\0\0\20\0\0\0\0\0\0\0"..., 193) = 193                                                    2329  close(0)                          = 0                                                                                                              2329  close(1)                          = 0                                                                                                              2329  close(2)                          = 0                                                                                                              2329  rt_sigprocmask(SIG_BLOCK, [INT WINCH], NULL, 8) = 0                                                                                                2329  signalfd4(-1, [INT WINCH], 8, 0)  = 0                                                                                                              2329  poll([{fd=4, events=POLLIN}, {fd=0, events=POLLIN}], 2, -1) = 1 ([{fd=4, revents=POLLIN}])                                                         2329  read(4, "\10\0\0\0 \0\0\0\26\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 32) = 32                                                              2329  writev(2, [{iov_base="/usr/local/bin/subl3: Invalid ar"..., iov_len=39}, {iov_base=NULL, iov_len=0}], 2) = -1 EBADF (Bad file descriptor)          2329  close(3)                          = 0                                                                                                              2329  close(4)                          = 0                                                                                                              2329  ioctl(5, SNDCTL_TMR_START or TCSETS, {B38400 opost isig icanon echo ...}) = 0                                                                      2329  close(5)                          = 0                                                                                                              2329  exit_group(1)                     = ?                                                                                                              2329  +++ exited with 1 +++                                                                                                                              bbulk$                                   `                                                                                                                                     

About this issue

  • Original URL
  • State: closed
  • Created 8 years ago
  • Reactions: 19
  • Comments: 21 (4 by maintainers)

Commits related to this issue

Most upvoted comments

Instead, I now need to write a startup shell script. vim /usr/local/bin/docker

exec '/c/Program Files/Docker/Docker/Resources/bin/docker.exe' $*

This is a problem when the argument is a string with spaces. change to this

exec '/c/Program Files/Docker/Docker/Resources/bin/docker.exe' "$@"

I’ve identified the issue, it’s related to us now supporting the 9P paths (\wsl$\distro) in wslpath and am drafting a fix.

Will also attempt to get the fix backported to 1903.

@benhillis Do you know yet whether a backport to 1903 is possible/likely? I assume it would be delivered through standard Windows Update patching.

Instead, I now need to write a startup shell script. vim /usr/local/bin/docker

exec '/c/Program Files/Docker/Docker/Resources/bin/docker.exe' $*

This is a problem when the argument is a string with spaces. change to this

exec '/c/Program Files/Docker/Docker/Resources/bin/docker.exe' "$@"

Or you may use /mnt/c/Program Files/Docker/Docker/Resources/bin/docker.exe if you have a default mount point.

This is still broken in the 1909 update, it used to work in 1809. Frustrating that it just stopped working, and hasn’t been fixed for months. Is there any chance a fix can be cherry picked for stable?

I have the same issue in my Win10 version 1903 build 18362.53.

I have been running docker.exe via a symbolic link on build 1809, and it doesn’t work after upgrading to 1903.

On 1809: 1809

On 1903: 1903


A simply repro:

whereis cmd.exe
ln -s /c/Windows/system32/cmd.exe ./cmd
./cmd

This should get you into cmd but nothing happens after running, and the program doesn’t have any output.

This still isn’t working for me on 2004…

This issue is closed. If people are experiencing difficulties on 2004 aka 19041 or better, please spawn a new issue following the template.

image

As of now, the latest OS build released is 18363.628 (and I’m not daring installing Windows Insider builds) so this feature is broken. Heavily.

Unfortunately the Windows servicing team would not take this fix to 1903 / 1909. Fixed in builds 18917 and later.

Working great on the insider builds.

I am able to reproduce with Windows Version 10.0.17758.4 as well.

WSL + Ubuntu 18.04 LTS

Easy repro: Follow https://docksal.io/installation#windows-virtualbox on this setup