WSL: ERROR: UtilCreateProcessAndWait:655: /bin/mount failed with status after upgrading to build 19624

Please fill out the below information:

  • Your Windows build number: Microsoft Windows [Version 10.0.19624.1000]

  • What you’re doing and what’s happening: It happens immediate after opening Ubuntu application

  • What’s wrong / what should be happening instead: I get message ‘An error occurred mounting one of your file systems. Please run ‘dmesg’ for more details.’. It looks like the windows file system is not mounted, causing other issues.

This is the output of dmesg:

`[ 0.266418] rtc_cmos 00:00: setting system clock to 2020-05-09 16:14:59 UTC (1589040899) [ 0.266428] Unstable clock detected, switching default tracing clock to “global” If you want to keep using the local clock, then add: “trace_clock=local” on the kernel command line [ 0.267596] Freeing unused kernel image memory: 1504K [ 0.307863] Write protecting the kernel read-only data: 20480k [ 0.308455] Freeing unused kernel image memory: 1988K [ 0.308698] Freeing unused kernel image memory: 1260K [ 0.308861] Run /init as init process [ 0.486389] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 [ 0.486766] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.487331] sd 0:0:0:0: [sda] 536870912 512-byte logical blocks: (275 GB/256 GiB) [ 0.487332] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.487400] sd 0:0:0:0: [sda] Write Protect is off [ 0.487401] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00 [ 0.487528] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 0.487612] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 0.490279] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.508602] scsi 0:0:0:1: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 [ 0.508845] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 0.509252] sd 0:0:0:1: [sdb] 536870912 512-byte logical blocks: (275 GB/256 GiB) [ 0.509253] sd 0:0:0:1: [sdb] 4096-byte physical blocks [ 0.509307] sd 0:0:0:1: [sdb] Write Protect is off [ 0.509308] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00 [ 0.509457] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 0.518335] hv_pci 6d32dfb4-5a19-4085-b301-36817e518994: PCI VMBus probing: Using version 0x10002 [ 0.518609] sd 0:0:0:1: [sdb] Attached SCSI disk [ 0.519055] hv_pci 6d32dfb4-5a19-4085-b301-36817e518994: PCI host bridge to bus b301:00 [ 0.519056] pci_bus b301:00: root bus resource [mem 0xc00000000-0xc00002fff window] [ 0.519528] pci b301:00:00.0: [1af4:1049] type 00 class 0x010000 [ 0.520685] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered [ 0.520893] pci b301:00:00.0: reg 0x10: [mem 0xc00000000-0xc00000fff 64bit] [ 0.521449] pci b301:00:00.0: reg 0x18: [mem 0xc00001000-0xc00001fff 64bit] [ 0.521982] pci b301:00:00.0: reg 0x20: [mem 0xc00002000-0xc00002fff 64bit] [ 0.525320] pci b301:00:00.0: BAR 0: assigned [mem 0xc00000000-0xc00000fff 64bit] [ 0.525700] pci b301:00:00.0: BAR 2: assigned [mem 0xc00001000-0xc00001fff 64bit] [ 0.526068] pci b301:00:00.0: BAR 4: assigned [mem 0xc00002000-0xc00002fff 64bit] [ 0.533082] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered [ 0.575248] 9pnet_virtio: no channels available for device drvfs [ 0.575377] init: (1) ERROR: UtilCreateProcessAndWait:655: /bin/mount failed with status 0x [ 0.575378] 2000 [ 0.575381] init: (1) WARNING: Retrying mount [ 0.590629] Adding 4194304k swap on /swap/file. Priority:-2 extents:2 across:4202496k [ 0.676269] 9pnet_virtio: no channels available for device drvfs [ 0.676373] init: (1) ERROR: UtilCreateProcessAndWait:655: /bin/mount failed with status 0x [ 0.676374] 2000 [ 0.676377] init: (1) WARNING: Retrying mount [ 0.777262] 9pnet_virtio: no channels available for device drvfs [ 0.777361] init: (1) ERROR: UtilCreateProcessAndWait:655: /bin/mount failed with status 0x [ 0.777363] 2000 [ 0.777365] init: (1) WARNING: Retrying mount [ 0.878194] 9pnet_virtio: no channels available for device drvfs [ 0.878327] init: (1) ERROR: UtilCreateProcessAndWait:655: /bin/mount failed with status 0x [ 0.979276] 9pnet_virtio: no channels available for device drvfs [ 0.982273] 9pnet_virtio: no channels available for device drvfs [ 1.083625] 9pnet_virtio: no channels available for device drvfs [ 1.184912] 9pnet_virtio: no channels available for device drvfs [ 1.257769] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1.286279] 9pnet_virtio: no channels available for device drvfs [ 1.387502] 9pnet_virtio: no channels available for device drvfs [ 1.388986] 9pnet_virtio: no channels available for device drvfs [ 1.490256] 9pnet_virtio: no channels available for device drvfs [ 1.591641] 9pnet_virtio: no channels available for device drvfs [ 1.695844] 9pnet_virtio: no channels available for device drvfs [ 1.797426] 9pnet_virtio: no channels available for device drvfs [ 1.798238] 9pnet_virtio: no channels available for device drvfs [ 1.902583] 9pnet_virtio: no channels available for device drvfs [ 2.004429] 9pnet_virtio: no channels available for device drvfs [ 2.105687] 9pnet_virtio: no channels available for device drvfs [ 2.208513] 9pnet_virtio: no channels available for device drvfs [ 49.146112] hv_balloon: Max. dynamic memory size: 13056 MB [ 61.488137] WSL2: Performing memory compaction. [ 122.496430] WSL2: Performing memory compaction. [ 183.504213] WSL2: Performing memory compaction. [ 244.512348] WSL2: Performing memory compaction. [ 305.520143] WSL2: Performing memory compaction. [ 366.529437] WSL2: Performing memory compaction. [ 427.541173] WSL2: Performing memory compaction. [ 430.476273] init: (5041) ERROR: CreateProcessParseCommon:871: Failed to translate C:\Program Files\Microsoft VS Code

[ 431.643418] init: (5044) ERROR: CreateProcessParseCommon:871: Failed to translate C:\Program Files\Microsoft VS Code

[ 431.714430] init: (5047) ERROR: CreateProcessParseCommon:871: Failed to translate c:\Users\ryudice.vscode\extensions\ms-vscode-remote.remote-wsl-0.42.4

[ 431.714484] init: (5047) ERROR: UtilTranslatePathList:2721: Failed to translate c:\Users\ryudice.vscode\extensions\ms-vscode-remote.remote-wsl-0.42.4

[ 431.714527] init: (5047) ERROR: UtilTranslatePathList:2721: Failed to translate C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\wbin

[ 1440.855953] init: (5054) ERROR: UtilTranslatePathList:2721: Failed to translate C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\wbin

[ 1440.856001] init: (5054) ERROR: UtilTranslatePathList:2721: Failed to translate C:\Program Files (x86)\Common Files\Oracle\Java\javapath

[ 1440.856047] init: (5054) ERROR: UtilTranslatePathList:2721: Failed to translate C:\WINDOWS\system32

[ 1440.856088] init: (5054) ERROR: UtilTranslatePathList:2721: Failed to translate C:\WINDOWS

[ 1440.856127] init: (5054) ERROR: UtilTranslatePathList:2721: Failed to translate C:\WINDOWS\System32\Wbem

[ 1448.575631] WSL2: Performing memory compaction.`

About this issue

  • Original URL
  • State: closed
  • Created 7 years ago
  • Reactions: 6
  • Comments: 25

Most upvoted comments

After wsl start, manually mount can be used temporarily mount -t drvfs C: /mnt/c -o metadata

20190 and getting this error message

Running wsl --update fixed the issue for me

Same issue happens after the 200508-1414 insider update.

After wsl start, manually mount can be used temporarily mount -t drvfs C: /mnt/c -o metadata

Has the fix come yet for automating this? I am on OS build 19645.1 and still having the issue.

+1 Please fix. It has broken everything I am working on.

After update to 20150 build, problem is gone. Disk mount, vscode with wsl remote starts and docker linux containers starts

I have same issue