Hello I’m have issues with LeftWm not changing resolution from 1360x768 to 1920x1080 on ky 32" hdmi tv. LeftWm is stuck in 1360x768 and when I use xrandr to change the screen to 1920x1080 it still thinks it is in 1360x768 by the output below… YES Cinnamon and SpectrWm work as they should on the same monitor.Tv… Nothing changes but logging into LeftWm… No matter what I do LeftWm will not set the screen right. What I mean the screen seams to switch to 1920x1080 (monitor says so) but LeftWm’s desktop is in the upper left (Not a pun) of the screen and the wallpaper is chopped up into like 6 areas. The desktop is about 2/3s across the top of the 32" screen and down from the top-left about half way. The screen is full but the desktop is all squished to the upper left of the screen…

I have tried several Themes and have the same issue. This was installed from the Arch Repo and NOT the “Git” in the AUR…

I was reading Issue #229 and I issued the below command and got this out put… Output of "leftwm-state" in a terminal {"window_title":"Tilix: Stargazer-Endev: ~ | 167x37 | pts/0","workspaces":[{"h":768,"w":1360,"x":0,"y":0,"layout":"MainAndVertStack","index":0,"tags":[{"name":"","index":0,"mine":true,"visible":true,"focused":true,"busy":true},{"name":"","index":1,"mine":false,"visible":false,"focused":false,"busy":true},{"name":"","index":2,"mine":false,"visible":false,"focused":false,"busy":true},{"name":"","index":3,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":4,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":5,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":6,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":7,"mine":false,"visible":false,"focused":false,"busy":false}]}]} {"window_title":"Tilix: leftwm-state","workspaces":[{"h":768,"w":1360,"x":0,"y":0,"layout":"MainAndVertStack","index":0,"tags":[{"name":"","index":0,"mine":true,"visible":true,"focused":true,"busy":true},{"name":"","index":1,"mine":false,"visible":false,"focused":false,"busy":true},{"name":"","index":2,"mine":false,"visible":false,"focused":false,"busy":true},{"name":"","index":3,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":4,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":5,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":6,"mine":false,"visible":false,"focused":false,"busy":false},{"name":"","index":7,"mine":false,"visible":false,"focused":false,"busy":false}]}]} I get this out put in 1368x768 or 1920x1080 no matter if I use Arandr or Xarndr The above output is the same…

This is EndeavourOS Cinnamon as the base system and I usually run SpectrWm and DWM a bit… But I seen LeftWm on a video and liked what I seen… Here is my INXI output…

` Inxi - System Data Information:

System: Kernel: 5.11.2-arch1-1 x86_64 bits: 64 compiler: gcc v: 10.2.1 Desktop: N/A Distro: EndeavourOS base: Arch Linux Machine: Type: Desktop Mobo: ASRock model: 970 Extreme4 serial: <filter> UEFI: American Megatrends v: P2.80 date: 08/05/2015 CPU: Info: 6-Core model: AMD FX-6300 bits: 64 type: MCP arch: Bulldozer rev: 0 L2 cache: 2 MiB flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 41922 Speed: 1424 MHz min/max: 1400/3500 MHz boost: enabled Core speeds (MHz): 1: 1424 2: 1717 3: 1396 4: 1389 5: 1397 6: 1394 Graphics: Device-1: AMD RV730 PRO [Radeon HD 4650] vendor: Hightech Information System driver: radeon v: kernel bus ID: 01:00.0 Display: x11 server: X.org 1.20.10 driver: loaded: ati,radeon unloaded: fbdev,modesetting,vesa resolution: <missing: xdpyinfo> Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: AMD SBx00 Azalia vendor: ASRock driver: snd_hda_intel v: kernel bus ID: 00:14.2 Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: Hightech Information System driver: snd_hda_intel v: kernel bus ID: 01:00.1 Sound Server: ALSA v: k5.11.2-arch1-1 Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8168 v: 8.048.03-NAPI port: c000 bus ID: 07:00.0 IF: enp7s0 state: up speed: 100 Mbps duplex: half mac: <filter> Drives: Local Storage: total: 1.59 TiB used: 282.99 GiB (17.4%) ID-1: /dev/sda vendor: Hitachi model: HDS721010CLA332 size: 931.51 GiB ID-2: /dev/sdb vendor: Seagate model: ST3750640AS P size: 698.64 GiB Message: No Optical or Floppy data was found. Partition: ID-1: / size: 95.62 GiB used: 17.86 GiB (18.7%) fs: ext4 dev: /dev/sda3 ID-2: /boot/efi size: 998 MiB used: 280 KiB (0.0%) fs: vfat dev: /dev/sda1 ID-3: /home size: 811.12 GiB used: 265.13 GiB (32.7%) fs: ext4 dev: /dev/sda4 Swap: ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) dev: /dev/sda2 Sensors: System Temperatures: cpu: 39.2 C mobo: N/A gpu: radeon temp: 65.0 C Fan Speeds (RPM): N/A Info: Processes: 233 Uptime: 22h 00m Memory: 11.65 GiB used: 2.68 GiB (23.0%) Init: systemd Compilers: gcc: 10.2.0 Packages: 1406 Shell: Zsh v: 5.8 inxi: 3.3.00

---

` Any Ideas? The 1360x768 is just to big on this screen… 😦 LLAP Bruce

This screen 1920x1080

This screen 1360x768