RaspberryMatic: Home Assistant Add-on rfd & HMIPServer ERROR

Describe the issue you are experiencing

Hello!

I am running Home Assistant using Home Assistant OS on a RasPi3 and a HMIP-RFUSB. Today, I upgraded from HA OS 7.2 to 7.3. In addition, I upgraded the RaspberryMatic Add-on from 202110_-something_ to latest 3.61.7.20220115. As expected during the first start up of the upgraded add-on, the stick’s firmware was upgraded to version 4.4.16. A short test reveals that my connected HM-IP devices worked properly.

Back to the front page of the add-on, Home Assistant tells me, that I can enable protection mode. So I did and restarted the add-on. Unfortunately, now, the add-on seems to stop working properly. The log shows the following lines:

Starting rfd: ....................ERROR
Starting HMIPServer: .......................................................................................................................................................ERROR

Neither a restart of the add-on itself nor a reboot of the Raspberry Pi / HA OS fixed the problem.

Describe the behavior you expected

I expected that the new version of the plugin works properly with enabled protection mode or at least a way to disable protection mode again – the corresponding button was removed in the latest version version of the add-on.

Steps to reproduce the issue

1. Use HA OS 7.3 + supervisor-2022.01.1 + core-2022.2.3
2. Upgrade from RaspberryMatic 202110-something to latest 3.61.7.20220115
3. Enable protection mode (was disabled as required by previous versions of RaspberryMatic).
4. RestartRaspberryMatic Add-on …

What is the version this bug report is based on?

3.61.7.20220115

Which base platform are you running?

ha-addon (HomeAssistant Add-on)

Which HomeMatic/homematicIP radio module are you using?

HmIP-RFUSB

Anything in the logs that might be useful for us?

Log from the add-on:

Mounting /data as /usr/local (Home Assistant Add-On): OK
Starting watchdog...
Identifying onboard hardware: oci, OK
Initializing RTC Clock: no hardware found
Running sysctl: OK
Checking for Factory Reset: not required
Checking for Backup Restore: not required
Initializing System: OK
Starting logging: OK
Init onboard LEDs: init, OK
Starting irqbalance: OK
Starting iptables: OK
Starting network: eth0: link up, fixed, firewall, inet up, 172.30.33.2, OK
Identifying Homematic RF-Hardware: ....HmRF: HMIP-RFUSB/eQ-3 HmIP-RFUSB@usb-3f980000.usb-1.5, HmIP: HMIP-RFUSB/eQ-3 HmIP-RFUSB@usb-3f980000.usb-1.5, OK
Updating Homematic RF-Hardware: HMIP-RFUSB: 4.4.16, OK
Starting hs485dLoader: disabled
Starting xinetd: OK
Starting eq3configd: OK
Starting lighttpd: OK
Starting ser2net: disabled
Starting ssdpd: OK
Starting ha-proxy: OK
Starting NUT services: disabled
Initializing Third-Party Addons: OK
Starting LGWFirmwareUpdate: ...OK
Setting LAN Gateway keys: OK
Starting hs485d: disabled
Starting multimacd: .OK
Starting rfd: ....................ERROR
Starting HMIPServer: .......................................................................................................................................................ERROR
Starting ReGaHss: .OK
Starting CloudMatic: OK
Starting NeoServer: disabled
Starting Third-Party Addons: OK
Starting crond: OK
Setup onboard LEDs: booted, OK

In the past, the HmIP-RFUSB was recognized as ttyUSB0, whereas now, the only USB device recognized by HA OS is not related to the HmIP, isn’t it?

Subsystem: usb
Device path:
/dev/bus/usb/001/001


BUSNUM: '001'
DEVNAME: /dev/bus/usb/001/001
DEVNUM: '001'
DEVPATH: /devices/platform/soc/3f980000.usb/usb1
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-platform-3f980000_usb
ID_MODEL: DWC_OTG_Controller
ID_MODEL_ENC: DWC\x20OTG\x20Controller
ID_MODEL_ID: '0002'
ID_PATH: platform-3f980000.usb
ID_PATH_TAG: platform-3f980000_usb
ID_REVISION: '0510'
ID_SERIAL: Linux_5.10.92-v7_dwc_otg_hcd_DWC_OTG_Controller_3f980000.usb
ID_SERIAL_SHORT: 3f980000.usb
ID_USB_INTERFACES: ':090000:'
ID_VENDOR: Linux_5.10.92-v7_dwc_otg_hcd
ID_VENDOR_ENC: Linux\x205.10.92-v7\x20dwc_otg_hcd
ID_VENDOR_ID: 1d6b
MAJOR: '189'
MINOR: '0'
OF_COMPATIBLE_0: brcm,bcm2708-usb
OF_COMPATIBLE_N: '1'
OF_FULLNAME: /soc/usb@7e980000
OF_NAME: usb
PRODUCT: 1d6b/2/510
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 9/0/1
USEC_INITIALIZED: '6692927'

Additional information

The HmIP-RFUSB is the only external USB device connected to the RPi.