influxdb: Problem after upgrading packages
Hello, I had an influx database to manage sensors data in the building. I am a complete beginner. Everything worked fine for 2 years. Today, after updating packages in raspbian and influx it does not work. I have messages: Failed to connect to http://localhost:8086: Get http://localhost:8086/ping: dial tcp [::1]:8086: connect: connection refused Please check your connection settings and ensure ‘influxd’ is running.
After sudo systemctl start influxdb is
Job for influxdb.service failed because the control process exited with error code.
See “systemctl status influxdb.service” and “journalctl -xe” for details.
And after systemctl status influxdb.service i have:
● influxdb.service - InfluxDB is an open-source, distributed, time series database
Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2021-08-01 23:11:23 CEST; 1min 12s ago
Docs: https://docs.influxdata.com/influxdb/
Process: 981 ExecStart=/usr/lib/influxdb/scripts/influxd-systemd-start.sh (code=exited, status=203/EXEC)
sie 01 23:11:23 raspberrypi systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restart. sie 01 23:11:23 raspberrypi systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5. sie 01 23:11:23 raspberrypi systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database. sie 01 23:11:23 raspberrypi systemd[1]: influxdb.service: Start request repeated too quickly. sie 01 23:11:23 raspberrypi systemd[1]: influxdb.service: Failed with result ‘exit-code’. sie 01 23:11:23 raspberrypi systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series database.
What happend, can you help me?
About this issue
- Original URL
- State: closed
- Created 3 years ago
- Reactions: 2
- Comments: 35 (7 by maintainers)
An rc (release candidate) for 1.8.10 has been built today with further fixes for this issue: https://s3.amazonaws.com/dl.influxdata.com/influxdb/releases/influxdb_1.8.10rc0_amd64.deb, https://s3.amazonaws.com/dl.influxdata.com/influxdb/releases/influxdb-1.8.10rc0.x86_64.rpm
Just found a comment at https://community.influxdata.com/t/influxdb-1-8-7-will-not-start/20965/24
this workaround works for me Turns out my DB is too big and it takes longer to start than the 10 seconds influxdb expects to take and so the start script aborts the process Workaround: Open /usr/lib/influxdb/scripts/influxd-systemd-start.sh either comment out line 34 (exit 1) – < this is a bad idea in the long run but will allow you to test if it works
Running on raspbian raspberrypidns 5.10.52-v8+ #1441 SMP PREEMPT Tue Aug 3 18:14:03 BST 2021 aarch64 GNU/Linux
even with 1.8.9 the influxdb does still not come up
ug 07 11:33:08 raspberrypidns systemd[1]: Failed to start InfluxDB is an open-source, distributed, time series database. Aug 07 11:33:08 raspberrypidns systemd[1]: influxdb.service: Service RestartSec=100ms expired, scheduling restart. Aug 07 11:33:08 raspberrypidns systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 305. Aug 07 11:33:08 raspberrypidns systemd[1]: Stopped InfluxDB is an open-source, distributed, time series database. Aug 07 11:33:08 raspberrypidns systemd[1]: Starting InfluxDB is an open-source, distributed, time series database… Aug 07 11:33:08 raspberrypidns influxd-systemd-start.sh[15011]: Merging with configuration at: /etc/influxdb/influxdb.conf Aug 07 11:33:08 raspberrypidns influxd-systemd-start.sh[15011]: Merging with configuration at: /etc/influxdb/influxdb.conf Aug 07 11:33:19 raspberrypidns influxd-systemd-start.sh[15011]: Failed to reach influxdb http endpoint at http://localhost:8086/health
@codyshepherd Please tell me if the update is published and will it be updated when you upgrade packages in linux (sudo apt upgrade)?
Dear Cody, Thanks for sharing, the 1.8.10 version is now available in debian via apt. I’ve installed it on two of my armhf devices and they started without a hitch. I’ll restart influxdb when the database grows bigger again, and when the startup would take considerably longer. Kind regards, Dennis
Same problem on Debian 10 (Buster) … the sleep increase to 10 sec also helped on my setup.
The 1.8.10rc1 build is now available.
Find the deb for your architecture at https://dl.influxdata.com/influxdb/releases/influxdb_1.8.10rc1_< arch >.deb
The deb is available for
amd64,arm64,armel,armhf, andi386And the rpm at https://dl.influxdata.com/influxdb/releases/influxdb-1.8.10rc1.< arch >.rpm
The rpm is available for
x86_64,aarch64,armel,armv7hl, andi386.We will cut another rc release, 1.8.10rc1, within the next couple of weeks, and a full 1.8.10 release should follow soon after that.
When can we expect an update for Raspbian systems? In the meantime I’ve upped my max-retries from 10 to 60.
This help temp. open terminal , then sudo influxd but do not close it
Hello before i run 1.8.6.1 for last 5 months and influd start normal, Then is show up 1.8.7.1 (10 days a go ) and influxd not start normal (Permission denied) , so i have to use sudo influx in a terminal and the is run as long the terminal is open. Today i see 1.8.9.1 is publish and i update/upgrade , but influxd still not run as before , only with sude Influxd. Possible to fix it ? mfg Andreas
+1 @codyshepherd Do you see the Influx team publishing the latest tag v1.8.8 build anytime soon? On that note, do you plan to allow downloading older released versions from the apt repo?
This issue is addressed by #21987, and a v1.8.8 release with the fix will be published today.