operating-system: U-Boot fails to boot from USB SSD sometimes on RPi 3b+
Describe the issue you are experiencing
Today I updated my HAOS from 7.0 to 7.1. After reboot, I am stuck on “No ethernet found”. This is displayed several times and eventually I am shown a HAOS> prompt. My RPi 3b+ is connected to ethernet and I never had connectivity issues until this update today. Reboot doesn’t help.
What operating system image do you use?
rpi3 (Raspberry Pi 3 32-bit OS)
What version of Home Assistant Operating System is installed?
7.1
Did you upgrade the Operating System.
Yes
Steps to reproduce the issue
- Update from HAOS 7.0 to 7.1
- Wait for HAOS to reboot
- The OS fails to connect to ethernet
Anything in the Supervisor logs that might be useful for us?
I have no connectivity to my RPi because of this, so I can't check. (I'm not sure if HA Core even started at all.)
Anything in the Host logs that might be useful for us?
I have no connectivity to my RPi because of this, so I can't check. (I'm not sure if HA Core even started at all.)
System Health information
No response
Additional information
No response
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Reactions: 1
- Comments: 34 (6 by maintainers)
Yes, I,m trying raspbian-> works great! Problem with HAOS.
@agners raspberry os and lite boots without problem from the same setup. Its a problem with the HAOS bootloader / uboot whatever. Like mention before from kuroxtyan.
I add the hdd as data drive. I hope in the next releases someone fix the issue.