core: Tradfri Starkvind wont turn on with toggle, only off
The problem
can not turn on the fan with he toggle only off
What version of Home Assistant Core has the issue?
2021.11.5
What was the last working version of Home Assistant Core?
never
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Tradfri
Link to integration documentation on our website
https://www.home-assistant.io/integrations/tradfri/
Example YAML snippet
- type: entities
title: Luchtreinigers
entities:
- fan.luchtreiniger_hall
- fan.luchtreiniger_woonkamer
Anything in the logs that might be useful for us?
nothing in the log
Additional information
the slider might turn the fan from off to on, but only when sliding to the far right. moving it to low speed doesnt work.
In fact, it often seems to block the full communication with the Trafdri Bridge altogether, and might be related to other issues in this integration.No proof yet, suspicion raised though…
About this issue
- Original URL
- State: closed
- Created 3 years ago
- Comments: 19 (16 by maintainers)
Commits related to this issue
- Add default mode 'auto' for tradfri starkvind air purifier on turn on (#63641) * add default mode 'auto' for tradfri starkvind air purifier on turn on This commits fixes the behaviour described in... — committed to home-assistant/core by leahoswald 2 years ago
- Add default mode 'auto' for tradfri starkvind air purifier on turn on (#63641) * add default mode 'auto' for tradfri starkvind air purifier on turn on This commits fixes the behaviour described in... — committed to home-assistant/core by leahoswald 2 years ago
Same problem here. Add a 👍 on this post if you are affected too.
What do you need for further debugging. I’m willing to provide all needed information.
My guess is, if I toggle the switch it doesn’t send a speed info along and is therefore ignored. Maybe using “Auto” as a default value would be a good idea, but I’m not sure if I’m able to configure such a default value in HA (couldn’t find a way).
link this issue in the template so we can follow. right, you did. never mind, we crossposted. sorry bout that
I’m currently working on a PR 😉