core: Regression - Overkiz Integration with Cozytouch hub - Only temperature and Energy comsuption supported , "heatingsystem" device not supported
The problem
After successful integration migration from Custom Component to Core Component , the water heater and heat devices are missing . The sensors temperature and Energy consumptions are present (OK)
What version of Home Assistant Core has the issue?
2022.10.3 with core component
What was the last working version of Home Assistant Core?
2020.10.3 with custom component
What type of installation are you running?
Home Assistant Supervised
Integration causing the issue
OVERKIZ
Link to integration documentation on our website
https://www.home-assistant.io/integrations/overkiz
Diagnostics information
overkiz-bd2ac765386d408e4ccb0ed075a2a77d-HP_Actuator-e6a2bcc841d44914f691d01922d0d7f9.json(1).txt
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No error in the log
Debug mode of Overkiz integration not activated . How to do it ?
Additional information
Debug mode of Overkiz integration not activated . How to do it ?
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Reactions: 1
- Comments: 17 (8 by maintainers)
Yes, and we’re getting close to it: https://github.com/iMicknl/ha-tahoma/issues/697
Yep it seems, I deleted the HA core integration and switched back to the Overkiz Custom component which with the new update is running well
@r-jean-pierre it looks like there is already a PR ready for integration made by @tetienne
This issue was closed because the initial issue was the missing of AtlanticPassAPCHeatingAndCoolingZone and AtlanticPassAPCDHW. The relative PR have been merged, and closed this issue autmatically.
@r-jean-pierre You’re issue seems to be the missing of
AtlanticElectricalHeaterWithAdjustableTemperatureSetpointwhich sould be ported in HA-Core. I’ll take a look in a week or so to do that.@jncanches I couldn’t find any place in Ha-Tahoma for
AtlanticDomesticHotWaterProductionV2_CETHI_V4_IOComponentThere isAtlanticDomesticHotWaterProductionV2_CV4E_IOComponentIs it the same and should it works the same? For this last one, I just created a new PR to port
DomesticHotWaterProductionNo worries. I have created a test version of the custom component that should fix the issues. Hope to merge and release it soon.
Regarding the other issues, we have some more contributors now, thus we should be able to merge some in soon. I am still quite swamped (and focusing on the local integration), but I will see if we can merge in some.
@antibill51 would you perhaps like to help in the development? You can just create a PR for the core integration, but best is to briefly check on our Discord if others are not working on the same device 😃.
Same here for the water heater AtlanticDomesticHotWaterProductionV2_CETHI_V4_IOComponent from a cozy touch. Before HA 2022.11, I was using the custom_component which has the water_heater discovered successfully but now the custom_component cannot start because of a dependency conflict 😦 Don’t know why water_heater are not created using official integration as they are correctly discovered with custom_component…
@iMicknl ,
Yes the heatingSytem device is already covered by #355 ha-tahoma as you indicated . So I have updated the title accordingly . Another issue will be opened for the other device not supported WaterHeatingsystem.
There are no log info for these devices not supported There are no diagnostic file for these 2 devices not supported because there are no device created , other than the file already provided , with an extract below :
` “deviceURL”: “io://--3482/1086078#1”, “controllableName”: “io:AtlanticPassAPCHeatPumpMainComponent”, “widget”: “AtlanticPassAPCHeatPump”, “uiClass”: “HeatingSystem”
“deviceURL”: “io://--3482/1086078#2”, “controllableName”: “io:AtlanticPassAPCDHWComponent”, “widget”: “AtlanticPassAPCDHW”, “uiClass”: “WaterHeatingSystem”
“deviceURL”: “io://--3482/1086078#8”, “controllableName”: “io:AtlanticPassAPCHeatingAndCoolingZoneComponent”, “widget”: “AtlanticPassAPCHeatingAndCoolingZone”, “uiClass”: “HeatingSystem”`
Note : The option Cooling is not installed in the PAC