core: Problems with the lamps of the rooms (groups) no longer go on or off. Or only with a start delay. After new Updates
The problem
Dear all,
Since the new updates of Homeassistant and Deconz, I have the problem that the lamps of the rooms (groups) no longer go on or off. Or only with a start delay. Although the instructions were registered in the log book. I found the following messages in the Log Viewer.
See: Anything in the logs that might be useful for us?
PS. It would be nice if you could fix the problem as soon as possible. And please only post updates as “urgently recommended” that have been tested without errors. Because it’s no fun being a beta tester for home automation!
Many thanks in advance.
With kind regards
What version of Home Assistant Core has the issue?
Home Assistant Core 2022.5.4
What was the last working version of Home Assistant Core?
core_2022.5.2 or core_2022.5.3
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Deconz
Link to integration documentation on our website
No response
Diagnostics information
config_entry-deconz-92001b4ebd2a47c3a0e8dd7fc6d3ec00.json (4).txt
Example YAML snippet
No response
Anything in the logs that might be useful for us?
messages, upgraded, tail = self._request_parser.feed_data(data)
File "aiohttp/_http_parser.pyx", line 551, in aiohttp._http_parser.HttpParser.feed_data
aiohttp.http_exceptions.BadHttpMessage: 400, message='Pause on PRI/Upgrade'
2022-05-14 15:50:10 WARNING (Recorder) [homeassistant.components.sensor.recorder] Entity sensor.consumption_22 from integration deconz has state class total_increasing, but its state is not strictly increasing. Triggered by state 289.372 (289.373) with last_updated set to 2022-05-14T13:46:52.071444+00:00. Please create a bug report at https://github.com/home-assistant/core/issues?q=is%3Aopen+is%3Aissue+label%3A%22integration%3A+deconz%22
2022-05-14 17:15:10 WARNING (Recorder) [homeassistant.components.sensor.recorder] Entity sensor.consumption_21 from integration deconz has state class total_increasing, but its state is not strictly increasing. Triggered by state 785.448 (785.449) with last_updated set to 2022-05-14T15:13:53.864867+00:00. Please create a bug report at https://github.com/home-assistant/core/issues?q=is%3Aopen+is%3Aissue+label%3A%22integration%3A+deconz%22
Additional information
No response
About this issue
- Original URL
- State: closed
- Created 2 years ago
- Reactions: 2
- Comments: 24 (10 by maintainers)
At the moment everything is running stably with this version. Thank you.🙂
Status message:
I can also confirm the errors described by Friedi1970. I fell back to the core version core_2022.5.0. Unfortunately without success. Then I updated my Home Assistant back to Core 2022.5.4, also without success. Afterwards, however, the new updates “Home Assistant OS 8.0” and “Home Assistant Supervisor 2022.05.2” were available on the system. When I carried them out and restarted the system twice, the problems with the Deconz integration disappeared.
System status now:
Home Assistant Core 2022.5.4 Home Assistant Supervisor 2022.05.2 Home Assistant OS 8.0 Kernel version 5.15.32-v8 Agent version 1.2.1
Phoscon-GW: Version: 2.15.3
ConBee II Version: 2.15.03 / 21.4.2022 Firmware: 26720700
PS: Deconz has warned of a rollback of the ConBee II (version/firmware). But I have no further information from Deconz support at the moment.
Now a new version of Home Assistant Core is due (version 2022.5.5). But I’m not sure whether it will make the system worse or better again! That’s why I’ll wait and see …