core: Fronius GEN 24 not getting produced energy data
The problem
I’m using a Fronius GEN24 inverter with smart meter and supported battery. The electrician tells me this is a quite new model. The integration works fine, except for the energy reports, that remain unknown. Maybe the interface or the APIs changed a little, I don’t know how that value is obtained by the integration. Let me know how to provide help in troubleshooting and figuring out how to get it right.
What is version of Home Assistant Core has the issue?
core-2021-7-4
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant Core
Integration causing the issue
Fronius
Link to integration documentation on our website
https://www.home-assistant.io/integrations/fronius/
Example YAML snippet
I used the basic config in the documentation for an installation with smart meter and battery and it worked just fine.
Anything in the logs that might be useful for us?
No response
Additional information
No response
About this issue
- Original URL
- State: closed
- Created 3 years ago
- Comments: 42 (29 by maintainers)
Hi, didn’t read the complete thread, but for me updating the Gen24 firmware to the latest version (1.13.13-1) gave me a counter value of total energy produced (without having the smart meter). Finally I can display PV production in the energy dashboard…
Ah so stupid of me. I integrated sensor.power_ac_fronius_inverter_1 but that includes ac power produced from the battery 🤦♂️
Not sure how that works actually… But it makes me think, maybe I can just configure the integration to probe all devices and just measure every possible sensor.
(that is, what is suggested in this thread: https://github.com/home-assistant/core/issues/54047#issuecomment-893883513)