google-cloud-go: profiler: TestAgentIntegration failed

Note: #7152 was also for this test, but it was closed more than 10 days ago. So, I didn’t mark it flaky.

commit: b2964a92d093a3d751e8b43aa70471bd989b1244 buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-20-15-47-00-115169-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Thu Jul 20 22:47:26 UTC 2023: + retry apt-get update
Thu Jul 20 22:47:26 UTC 2023: + for i in {1…3}
Thu Jul 20 22:47:26 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 22:47:26 UTC 2023: + apt-get update
Thu Jul 20 22:47:28 UTC 2023: + return 0
Thu Jul 20 22:47:28 UTC 2023: + retry apt-get -y -q install git
Thu Jul 20 22:47:28 UTC 2023: + for i in {1…3}
Thu Jul 20 22:47:28 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 22:47:28 UTC 2023: + apt-get -y -q install git
Thu Jul 20 22:47:29 UTC 2023: debconf: unable to initialize frontend: Dialog
Thu Jul 20 22:47:29 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Thu Jul 20 22:47:29 UTC 2023: debconf: falling back to frontend: Readline
Thu Jul 20 22:47:29 UTC 2023: debconf: unable to initialize frontend: Readline
Thu Jul 20 22:47:29 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Thu Jul 20 22:47:29 UTC 2023: debconf: falling back to frontend: Teletype
Thu Jul 20 22:47:29 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Thu Jul 20 22:47:39 UTC 2023: + return 0
Thu Jul 20 22:47:39 UTC 2023: + mkdir -p /tmp/gocache
Thu Jul 20 22:47:39 UTC 2023: + export GOCACHE=/tmp/gocache
Thu Jul 20 22:47:39 UTC 2023: + GOCACHE=/tmp/gocache
Thu Jul 20 22:47:39 UTC 2023: + ‘[’ master = master ‘]’
Thu Jul 20 22:47:39 UTC 2023: + retry apt-get -y -q install gcc
Thu Jul 20 22:47:39 UTC 2023: + for i in {1…3}
Thu Jul 20 22:47:39 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 22:47:39 UTC 2023: + apt-get -y -q install gcc
Thu Jul 20 22:47:40 UTC 2023: debconf: unable to initialize frontend: Dialog
Thu Jul 20 22:47:40 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Thu Jul 20 22:47:40 UTC 2023: debconf: falling back to frontend: Readline
Thu Jul 20 22:47:40 UTC 2023: debconf: unable to initialize frontend: Readline
Thu Jul 20 22:47:40 UTC 2023: debconf: (This frontend requires a controlling tty.)
Thu Jul 20 22:47:40 UTC 2023: debconf: falling back to frontend: Teletype
Thu Jul 20 22:47:40 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Thu Jul 20 22:48:13 UTC 2023: + return 0
Thu Jul 20 22:48:13 UTC 2023: + mkdir -p /tmp/bin
Thu Jul 20 22:48:13 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Thu Jul 20 22:48:13 UTC 2023: + for i in {1…3}
Thu Jul 20 22:48:13 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 22:48:13 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Thu Jul 20 22:48:13 UTC 2023: + return 0
Thu Jul 20 22:48:13 UTC 2023: + chmod +x /tmp/bin/gimme
Thu Jul 20 22:48:14 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Thu Jul 20 22:48:14 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Thu Jul 20 22:48:14 UTC 2023: + retry gimme_retrier
Thu Jul 20 22:48:14 UTC 2023: + for i in {1…3}
Thu Jul 20 22:48:14 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 22:48:14 UTC 2023: + gimme_retrier
Thu Jul 20 22:48:14 UTC 2023: ++ gimme master
Thu Jul 20 22:49:18 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 22:49:18 UTC 2023: (using download type ‘auto’)
Thu Jul 20 22:49:18 UTC 2023: + eval ‘’
Thu Jul 20 22:49:18 UTC 2023: + which go
Thu Jul 20 22:49:18 UTC 2023: + for i in {1…3}
Thu Jul 20 22:49:18 UTC 2023: + ‘[’ 2 == 1 ‘]’
Thu Jul 20 22:49:18 UTC 2023: + sleep 10
Thu Jul 20 22:49:28 UTC 2023: + gimme_retrier
Thu Jul 20 22:49:28 UTC 2023: ++ gimme master
Thu Jul 20 22:49:29 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 22:49:29 UTC 2023: (using download type ‘auto’)
Thu Jul 20 22:49:29 UTC 2023: + eval ‘’
Thu Jul 20 22:49:29 UTC 2023: + which go
Thu Jul 20 22:49:29 UTC 2023: + for i in {1…3}
Thu Jul 20 22:49:29 UTC 2023: + ‘[’ 3 == 1 ‘]’
Thu Jul 20 22:49:29 UTC 2023: + sleep 10
Thu Jul 20 22:49:39 UTC 2023: + gimme_retrier
Thu Jul 20 22:49:39 UTC 2023: ++ gimme master
Thu Jul 20 22:49:40 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 22:49:40 UTC 2023: (using download type ‘auto’)
Thu Jul 20 22:49:40 UTC 2023: + eval ‘’
Thu Jul 20 22:49:40 UTC 2023: + which go
Thu Jul 20 22:49:40 UTC 2023: + return 1
Thu Jul 20 22:49:40 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Thu Jul 20 22:49:40 UTC 2023: failed to set up or run the benchmark
Thu Jul 20 22:49:40 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

About this issue

  • Original URL
  • State: closed
  • Created a year ago
  • Reactions: 1
  • Comments: 28 (2 by maintainers)

Commits related to this issue

Most upvoted comments

commit: d4f4cf237b09bb33bab3553ec52921fbeb2de39c buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-30-11-27-45-124263-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Sun Jul 30 18:28:05 UTC 2023: + retry apt-get update
Sun Jul 30 18:28:05 UTC 2023: + for i in {1…3}
Sun Jul 30 18:28:05 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sun Jul 30 18:28:05 UTC 2023: + apt-get update
Sun Jul 30 18:28:07 UTC 2023: + return 0
Sun Jul 30 18:28:07 UTC 2023: + retry apt-get -y -q install git
Sun Jul 30 18:28:07 UTC 2023: + for i in {1…3}
Sun Jul 30 18:28:07 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sun Jul 30 18:28:07 UTC 2023: + apt-get -y -q install git
Sun Jul 30 18:28:08 UTC 2023: debconf: unable to initialize frontend: Dialog
Sun Jul 30 18:28:08 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sun Jul 30 18:28:08 UTC 2023: debconf: falling back to frontend: Readline
Sun Jul 30 18:28:08 UTC 2023: debconf: unable to initialize frontend: Readline
Sun Jul 30 18:28:08 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Sun Jul 30 18:28:08 UTC 2023: debconf: falling back to frontend: Teletype
Sun Jul 30 18:28:08 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sun Jul 30 18:28:18 UTC 2023: + return 0
Sun Jul 30 18:28:18 UTC 2023: + mkdir -p /tmp/gocache
Sun Jul 30 18:28:18 UTC 2023: + export GOCACHE=/tmp/gocache
Sun Jul 30 18:28:18 UTC 2023: + GOCACHE=/tmp/gocache
Sun Jul 30 18:28:18 UTC 2023: + ‘[’ master = master ‘]’
Sun Jul 30 18:28:18 UTC 2023: + retry apt-get -y -q install gcc
Sun Jul 30 18:28:18 UTC 2023: + for i in {1…3}
Sun Jul 30 18:28:18 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sun Jul 30 18:28:18 UTC 2023: + apt-get -y -q install gcc
Sun Jul 30 18:28:19 UTC 2023: debconf: unable to initialize frontend: Dialog
Sun Jul 30 18:28:19 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sun Jul 30 18:28:19 UTC 2023: debconf: falling back to frontend: Readline
Sun Jul 30 18:28:19 UTC 2023: debconf: unable to initialize frontend: Readline
Sun Jul 30 18:28:19 UTC 2023: debconf: (This frontend requires a controlling tty.)
Sun Jul 30 18:28:19 UTC 2023: debconf: falling back to frontend: Teletype
Sun Jul 30 18:28:19 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sun Jul 30 18:28:54 UTC 2023: + return 0
Sun Jul 30 18:28:54 UTC 2023: + mkdir -p /tmp/bin
Sun Jul 30 18:28:54 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sun Jul 30 18:28:54 UTC 2023: + for i in {1…3}
Sun Jul 30 18:28:54 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sun Jul 30 18:28:54 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sun Jul 30 18:28:54 UTC 2023: + return 0
Sun Jul 30 18:28:54 UTC 2023: + chmod +x /tmp/bin/gimme
Sun Jul 30 18:28:54 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sun Jul 30 18:28:54 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sun Jul 30 18:28:54 UTC 2023: + retry gimme_retrier
Sun Jul 30 18:28:54 UTC 2023: + for i in {1…3}
Sun Jul 30 18:28:54 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sun Jul 30 18:28:54 UTC 2023: + gimme_retrier
Sun Jul 30 18:28:54 UTC 2023: ++ gimme master
Sun Jul 30 18:29:46 UTC 2023: I don’t have any idea what to do with ‘master’.
Sun Jul 30 18:29:46 UTC 2023: (using download type ‘auto’)
Sun Jul 30 18:29:46 UTC 2023: + eval ‘’
Sun Jul 30 18:29:46 UTC 2023: + which go
Sun Jul 30 18:29:46 UTC 2023: + for i in {1…3}
Sun Jul 30 18:29:46 UTC 2023: + ‘[’ 2 == 1 ‘]’
Sun Jul 30 18:29:46 UTC 2023: + sleep 10
Sun Jul 30 18:29:56 UTC 2023: + gimme_retrier
Sun Jul 30 18:29:56 UTC 2023: ++ gimme master
Sun Jul 30 18:29:57 UTC 2023: I don’t have any idea what to do with ‘master’.
Sun Jul 30 18:29:57 UTC 2023: (using download type ‘auto’)
Sun Jul 30 18:29:57 UTC 2023: + eval ‘’
Sun Jul 30 18:29:57 UTC 2023: + which go
Sun Jul 30 18:29:57 UTC 2023: + for i in {1…3}
Sun Jul 30 18:29:57 UTC 2023: + ‘[’ 3 == 1 ‘]’
Sun Jul 30 18:29:57 UTC 2023: + sleep 10
Sun Jul 30 18:30:07 UTC 2023: + gimme_retrier
Sun Jul 30 18:30:07 UTC 2023: ++ gimme master
Sun Jul 30 18:30:08 UTC 2023: I don’t have any idea what to do with ‘master’.
Sun Jul 30 18:30:08 UTC 2023: (using download type ‘auto’)
Sun Jul 30 18:30:08 UTC 2023: + eval ‘’
Sun Jul 30 18:30:08 UTC 2023: + which go
Sun Jul 30 18:30:08 UTC 2023: + return 1
Sun Jul 30 18:30:08 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Sun Jul 30 18:30:08 UTC 2023: failed to set up or run the benchmark
Sun Jul 30 18:30:08 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 30, 2023

commit: f609b3cf831fb89c45386f81d0047560120cb3f4 buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-28-21-01-41-838074-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Sat Jul 29 04:02:01 UTC 2023: + retry apt-get update
Sat Jul 29 04:02:01 UTC 2023: + for i in {1…3}
Sat Jul 29 04:02:01 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 04:02:01 UTC 2023: + apt-get update
Sat Jul 29 04:02:03 UTC 2023: + return 0
Sat Jul 29 04:02:03 UTC 2023: + retry apt-get -y -q install git
Sat Jul 29 04:02:03 UTC 2023: + for i in {1…3}
Sat Jul 29 04:02:03 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 04:02:03 UTC 2023: + apt-get -y -q install git
Sat Jul 29 04:02:04 UTC 2023: debconf: unable to initialize frontend: Dialog
Sat Jul 29 04:02:04 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sat Jul 29 04:02:04 UTC 2023: debconf: falling back to frontend: Readline
Sat Jul 29 04:02:04 UTC 2023: debconf: unable to initialize frontend: Readline
Sat Jul 29 04:02:04 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Sat Jul 29 04:02:04 UTC 2023: debconf: falling back to frontend: Teletype
Sat Jul 29 04:02:04 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sat Jul 29 04:02:13 UTC 2023: + return 0
Sat Jul 29 04:02:13 UTC 2023: + mkdir -p /tmp/gocache
Sat Jul 29 04:02:13 UTC 2023: + export GOCACHE=/tmp/gocache
Sat Jul 29 04:02:13 UTC 2023: + GOCACHE=/tmp/gocache
Sat Jul 29 04:02:13 UTC 2023: + ‘[’ master = master ‘]’
Sat Jul 29 04:02:13 UTC 2023: + retry apt-get -y -q install gcc
Sat Jul 29 04:02:13 UTC 2023: + for i in {1…3}
Sat Jul 29 04:02:13 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 04:02:13 UTC 2023: + apt-get -y -q install gcc
Sat Jul 29 04:02:14 UTC 2023: debconf: unable to initialize frontend: Dialog
Sat Jul 29 04:02:14 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sat Jul 29 04:02:14 UTC 2023: debconf: falling back to frontend: Readline
Sat Jul 29 04:02:14 UTC 2023: debconf: unable to initialize frontend: Readline
Sat Jul 29 04:02:14 UTC 2023: debconf: (This frontend requires a controlling tty.)
Sat Jul 29 04:02:14 UTC 2023: debconf: falling back to frontend: Teletype
Sat Jul 29 04:02:14 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sat Jul 29 04:02:49 UTC 2023: + return 0
Sat Jul 29 04:02:49 UTC 2023: + mkdir -p /tmp/bin
Sat Jul 29 04:02:49 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sat Jul 29 04:02:49 UTC 2023: + for i in {1…3}
Sat Jul 29 04:02:49 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 04:02:49 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sat Jul 29 04:02:49 UTC 2023: + return 0
Sat Jul 29 04:02:49 UTC 2023: + chmod +x /tmp/bin/gimme
Sat Jul 29 04:02:49 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sat Jul 29 04:02:49 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sat Jul 29 04:02:49 UTC 2023: + retry gimme_retrier
Sat Jul 29 04:02:49 UTC 2023: + for i in {1…3}
Sat Jul 29 04:02:49 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 04:02:49 UTC 2023: + gimme_retrier
Sat Jul 29 04:02:49 UTC 2023: ++ gimme master
Sat Jul 29 04:03:40 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 04:03:40 UTC 2023: (using download type ‘auto’)
Sat Jul 29 04:03:40 UTC 2023: + eval ‘’
Sat Jul 29 04:03:40 UTC 2023: + which go
Sat Jul 29 04:03:40 UTC 2023: + for i in {1…3}
Sat Jul 29 04:03:40 UTC 2023: + ‘[’ 2 == 1 ‘]’
Sat Jul 29 04:03:40 UTC 2023: + sleep 10
Sat Jul 29 04:03:50 UTC 2023: + gimme_retrier
Sat Jul 29 04:03:50 UTC 2023: ++ gimme master
Sat Jul 29 04:03:51 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 04:03:51 UTC 2023: (using download type ‘auto’)
Sat Jul 29 04:03:51 UTC 2023: + eval ‘’
Sat Jul 29 04:03:51 UTC 2023: + which go
Sat Jul 29 04:03:51 UTC 2023: + for i in {1…3}
Sat Jul 29 04:03:51 UTC 2023: + ‘[’ 3 == 1 ‘]’
Sat Jul 29 04:03:51 UTC 2023: + sleep 10
Sat Jul 29 04:04:01 UTC 2023: + gimme_retrier
Sat Jul 29 04:04:01 UTC 2023: ++ gimme master
Sat Jul 29 04:04:02 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 04:04:02 UTC 2023: (using download type ‘auto’)
Sat Jul 29 04:04:02 UTC 2023: + eval ‘’
Sat Jul 29 04:04:02 UTC 2023: + which go
Sat Jul 29 04:04:02 UTC 2023: + return 1
Sat Jul 29 04:04:02 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Sat Jul 29 04:04:02 UTC 2023: failed to set up or run the benchmark
Sat Jul 29 04:04:02 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 29, 2023

commit: b8904253a0f8424ea4548469e5feef321bd7396a buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-28-17-25-17-267386-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Sat Jul 29 00:25:38 UTC 2023: + retry apt-get update
Sat Jul 29 00:25:38 UTC 2023: + for i in {1…3}
Sat Jul 29 00:25:38 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 00:25:38 UTC 2023: + apt-get update
Sat Jul 29 00:25:40 UTC 2023: + return 0
Sat Jul 29 00:25:40 UTC 2023: + retry apt-get -y -q install git
Sat Jul 29 00:25:40 UTC 2023: + for i in {1…3}
Sat Jul 29 00:25:40 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 00:25:40 UTC 2023: + apt-get -y -q install git
Sat Jul 29 00:25:41 UTC 2023: debconf: unable to initialize frontend: Dialog
Sat Jul 29 00:25:41 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sat Jul 29 00:25:41 UTC 2023: debconf: falling back to frontend: Readline
Sat Jul 29 00:25:41 UTC 2023: debconf: unable to initialize frontend: Readline
Sat Jul 29 00:25:41 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Sat Jul 29 00:25:41 UTC 2023: debconf: falling back to frontend: Teletype
Sat Jul 29 00:25:41 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sat Jul 29 00:25:50 UTC 2023: + return 0
Sat Jul 29 00:25:50 UTC 2023: + mkdir -p /tmp/gocache
Sat Jul 29 00:25:50 UTC 2023: + export GOCACHE=/tmp/gocache
Sat Jul 29 00:25:50 UTC 2023: + GOCACHE=/tmp/gocache
Sat Jul 29 00:25:50 UTC 2023: + ‘[’ master = master ‘]’
Sat Jul 29 00:25:50 UTC 2023: + retry apt-get -y -q install gcc
Sat Jul 29 00:25:50 UTC 2023: + for i in {1…3}
Sat Jul 29 00:25:50 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 00:25:50 UTC 2023: + apt-get -y -q install gcc
Sat Jul 29 00:25:51 UTC 2023: debconf: unable to initialize frontend: Dialog
Sat Jul 29 00:25:51 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Sat Jul 29 00:25:51 UTC 2023: debconf: falling back to frontend: Readline
Sat Jul 29 00:25:51 UTC 2023: debconf: unable to initialize frontend: Readline
Sat Jul 29 00:25:51 UTC 2023: debconf: (This frontend requires a controlling tty.)
Sat Jul 29 00:25:51 UTC 2023: debconf: falling back to frontend: Teletype
Sat Jul 29 00:25:51 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Sat Jul 29 00:26:24 UTC 2023: + return 0
Sat Jul 29 00:26:24 UTC 2023: + mkdir -p /tmp/bin
Sat Jul 29 00:26:24 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sat Jul 29 00:26:24 UTC 2023: + for i in {1…3}
Sat Jul 29 00:26:24 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 00:26:24 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Sat Jul 29 00:26:24 UTC 2023: + return 0
Sat Jul 29 00:26:24 UTC 2023: + chmod +x /tmp/bin/gimme
Sat Jul 29 00:26:24 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sat Jul 29 00:26:24 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Sat Jul 29 00:26:24 UTC 2023: + retry gimme_retrier
Sat Jul 29 00:26:24 UTC 2023: + for i in {1…3}
Sat Jul 29 00:26:24 UTC 2023: + ‘[’ 1 == 1 ‘]’
Sat Jul 29 00:26:24 UTC 2023: + gimme_retrier
Sat Jul 29 00:26:24 UTC 2023: ++ gimme master
Sat Jul 29 00:27:15 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 00:27:15 UTC 2023: (using download type ‘auto’)
Sat Jul 29 00:27:15 UTC 2023: + eval ‘’
Sat Jul 29 00:27:15 UTC 2023: + which go
Sat Jul 29 00:27:15 UTC 2023: + for i in {1…3}
Sat Jul 29 00:27:15 UTC 2023: + ‘[’ 2 == 1 ‘]’
Sat Jul 29 00:27:15 UTC 2023: + sleep 10
Sat Jul 29 00:27:25 UTC 2023: + gimme_retrier
Sat Jul 29 00:27:25 UTC 2023: ++ gimme master
Sat Jul 29 00:27:26 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 00:27:26 UTC 2023: (using download type ‘auto’)
Sat Jul 29 00:27:26 UTC 2023: + eval ‘’
Sat Jul 29 00:27:26 UTC 2023: + which go
Sat Jul 29 00:27:26 UTC 2023: + for i in {1…3}
Sat Jul 29 00:27:26 UTC 2023: + ‘[’ 3 == 1 ‘]’
Sat Jul 29 00:27:26 UTC 2023: + sleep 10
Sat Jul 29 00:27:36 UTC 2023: + gimme_retrier
Sat Jul 29 00:27:36 UTC 2023: ++ gimme master
Sat Jul 29 00:27:37 UTC 2023: I don’t have any idea what to do with ‘master’.
Sat Jul 29 00:27:37 UTC 2023: (using download type ‘auto’)
Sat Jul 29 00:27:37 UTC 2023: + eval ‘’
Sat Jul 29 00:27:37 UTC 2023: + which go
Sat Jul 29 00:27:37 UTC 2023: + return 1
Sat Jul 29 00:27:37 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Sat Jul 29 00:27:37 UTC 2023: failed to set up or run the benchmark
Sat Jul 29 00:27:37 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 29, 2023

commit: f844946b7eb723949372ce502c4b40f01036c63d buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-28-15-47-53-799368-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Fri Jul 28 22:48:13 UTC 2023: + retry apt-get update
Fri Jul 28 22:48:13 UTC 2023: + for i in {1…3}
Fri Jul 28 22:48:13 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 28 22:48:13 UTC 2023: + apt-get update
Fri Jul 28 22:48:15 UTC 2023: + return 0
Fri Jul 28 22:48:15 UTC 2023: + retry apt-get -y -q install git
Fri Jul 28 22:48:15 UTC 2023: + for i in {1…3}
Fri Jul 28 22:48:15 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 28 22:48:15 UTC 2023: + apt-get -y -q install git
Fri Jul 28 22:48:16 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 28 22:48:16 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 28 22:48:16 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 28 22:48:16 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 28 22:48:16 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Fri Jul 28 22:48:16 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 28 22:48:16 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 28 22:48:26 UTC 2023: + return 0
Fri Jul 28 22:48:26 UTC 2023: + mkdir -p /tmp/gocache
Fri Jul 28 22:48:26 UTC 2023: + export GOCACHE=/tmp/gocache
Fri Jul 28 22:48:26 UTC 2023: + GOCACHE=/tmp/gocache
Fri Jul 28 22:48:26 UTC 2023: + ‘[’ master = master ‘]’
Fri Jul 28 22:48:26 UTC 2023: + retry apt-get -y -q install gcc
Fri Jul 28 22:48:26 UTC 2023: + for i in {1…3}
Fri Jul 28 22:48:26 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 28 22:48:26 UTC 2023: + apt-get -y -q install gcc
Fri Jul 28 22:48:27 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 28 22:48:27 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 28 22:48:27 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 28 22:48:27 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 28 22:48:27 UTC 2023: debconf: (This frontend requires a controlling tty.)
Fri Jul 28 22:48:27 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 28 22:48:27 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 28 22:49:02 UTC 2023: + return 0
Fri Jul 28 22:49:02 UTC 2023: + mkdir -p /tmp/bin
Fri Jul 28 22:49:02 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 28 22:49:02 UTC 2023: + for i in {1…3}
Fri Jul 28 22:49:02 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 28 22:49:02 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 28 22:49:02 UTC 2023: + return 0
Fri Jul 28 22:49:02 UTC 2023: + chmod +x /tmp/bin/gimme
Fri Jul 28 22:49:02 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 28 22:49:02 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 28 22:49:02 UTC 2023: + retry gimme_retrier
Fri Jul 28 22:49:02 UTC 2023: + for i in {1…3}
Fri Jul 28 22:49:02 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 28 22:49:02 UTC 2023: + gimme_retrier
Fri Jul 28 22:49:02 UTC 2023: ++ gimme master
Fri Jul 28 22:49:56 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 28 22:49:56 UTC 2023: (using download type ‘auto’)
Fri Jul 28 22:49:56 UTC 2023: + eval ‘’
Fri Jul 28 22:49:56 UTC 2023: + which go
Fri Jul 28 22:49:56 UTC 2023: + for i in {1…3}
Fri Jul 28 22:49:56 UTC 2023: + ‘[’ 2 == 1 ‘]’
Fri Jul 28 22:49:56 UTC 2023: + sleep 10
Fri Jul 28 22:50:06 UTC 2023: + gimme_retrier
Fri Jul 28 22:50:06 UTC 2023: ++ gimme master
Fri Jul 28 22:50:07 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 28 22:50:07 UTC 2023: (using download type ‘auto’)
Fri Jul 28 22:50:07 UTC 2023: + eval ‘’
Fri Jul 28 22:50:07 UTC 2023: + which go
Fri Jul 28 22:50:07 UTC 2023: + for i in {1…3}
Fri Jul 28 22:50:07 UTC 2023: + ‘[’ 3 == 1 ‘]’
Fri Jul 28 22:50:07 UTC 2023: + sleep 10
Fri Jul 28 22:50:17 UTC 2023: + gimme_retrier
Fri Jul 28 22:50:17 UTC 2023: ++ gimme master
Fri Jul 28 22:50:18 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 28 22:50:18 UTC 2023: (using download type ‘auto’)
Fri Jul 28 22:50:18 UTC 2023: + eval ‘’
Fri Jul 28 22:50:18 UTC 2023: + which go
Fri Jul 28 22:50:18 UTC 2023: + return 1
Fri Jul 28 22:50:18 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Fri Jul 28 22:50:18 UTC 2023: failed to set up or run the benchmark
Fri Jul 28 22:50:18 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 28, 2023

commit: b3eda800e0594ca43fd9b99b1b44e7fd4cad4542 buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-21-10-55-18-953353-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Fri Jul 21 17:55:42 UTC 2023: + retry apt-get update
Fri Jul 21 17:55:42 UTC 2023: + for i in {1…3}
Fri Jul 21 17:55:42 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 17:55:42 UTC 2023: + apt-get update
Fri Jul 21 17:55:44 UTC 2023: + return 0
Fri Jul 21 17:55:44 UTC 2023: + retry apt-get -y -q install git
Fri Jul 21 17:55:44 UTC 2023: + for i in {1…3}
Fri Jul 21 17:55:44 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 17:55:44 UTC 2023: + apt-get -y -q install git
Fri Jul 21 17:55:45 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 21 17:55:45 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 21 17:55:45 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 21 17:55:45 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 21 17:55:45 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Fri Jul 21 17:55:45 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 21 17:55:45 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 21 17:55:55 UTC 2023: + return 0
Fri Jul 21 17:55:55 UTC 2023: + mkdir -p /tmp/gocache
Fri Jul 21 17:55:55 UTC 2023: + export GOCACHE=/tmp/gocache
Fri Jul 21 17:55:55 UTC 2023: + GOCACHE=/tmp/gocache
Fri Jul 21 17:55:55 UTC 2023: + ‘[’ master = master ‘]’
Fri Jul 21 17:55:55 UTC 2023: + retry apt-get -y -q install gcc
Fri Jul 21 17:55:55 UTC 2023: + for i in {1…3}
Fri Jul 21 17:55:55 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 17:55:55 UTC 2023: + apt-get -y -q install gcc
Fri Jul 21 17:55:56 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 21 17:55:56 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 21 17:55:56 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 21 17:55:56 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 21 17:55:56 UTC 2023: debconf: (This frontend requires a controlling tty.)
Fri Jul 21 17:55:56 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 21 17:55:56 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 21 17:56:31 UTC 2023: + return 0
Fri Jul 21 17:56:31 UTC 2023: + mkdir -p /tmp/bin
Fri Jul 21 17:56:31 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 21 17:56:31 UTC 2023: + for i in {1…3}
Fri Jul 21 17:56:31 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 17:56:31 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 21 17:56:31 UTC 2023: + return 0
Fri Jul 21 17:56:31 UTC 2023: + chmod +x /tmp/bin/gimme
Fri Jul 21 17:56:31 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 21 17:56:31 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 21 17:56:31 UTC 2023: + retry gimme_retrier
Fri Jul 21 17:56:31 UTC 2023: + for i in {1…3}
Fri Jul 21 17:56:31 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 17:56:31 UTC 2023: + gimme_retrier
Fri Jul 21 17:56:31 UTC 2023: ++ gimme master
Fri Jul 21 17:57:23 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 17:57:23 UTC 2023: (using download type ‘auto’)
Fri Jul 21 17:57:23 UTC 2023: + eval ‘’
Fri Jul 21 17:57:23 UTC 2023: + which go
Fri Jul 21 17:57:23 UTC 2023: + for i in {1…3}
Fri Jul 21 17:57:23 UTC 2023: + ‘[’ 2 == 1 ‘]’
Fri Jul 21 17:57:23 UTC 2023: + sleep 10
Fri Jul 21 17:57:33 UTC 2023: + gimme_retrier
Fri Jul 21 17:57:33 UTC 2023: ++ gimme master
Fri Jul 21 17:57:34 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 17:57:34 UTC 2023: (using download type ‘auto’)
Fri Jul 21 17:57:34 UTC 2023: + eval ‘’
Fri Jul 21 17:57:34 UTC 2023: + which go
Fri Jul 21 17:57:34 UTC 2023: + for i in {1…3}
Fri Jul 21 17:57:34 UTC 2023: + ‘[’ 3 == 1 ‘]’
Fri Jul 21 17:57:34 UTC 2023: + sleep 10
Fri Jul 21 17:57:44 UTC 2023: + gimme_retrier
Fri Jul 21 17:57:44 UTC 2023: ++ gimme master
Fri Jul 21 17:57:45 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 17:57:45 UTC 2023: (using download type ‘auto’)
Fri Jul 21 17:57:45 UTC 2023: + eval ‘’
Fri Jul 21 17:57:45 UTC 2023: + which go
Fri Jul 21 17:57:45 UTC 2023: + return 1
Fri Jul 21 17:57:45 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Fri Jul 21 17:57:45 UTC 2023: failed to set up or run the benchmark
Fri Jul 21 17:57:45 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 21, 2023

commit: 6e0227de753a66332030d76a906356696c1b37b6 buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-20-18-55-36-583324-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Fri Jul 21 01:55:56 UTC 2023: + retry apt-get update
Fri Jul 21 01:55:56 UTC 2023: + for i in {1…3}
Fri Jul 21 01:55:56 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 01:55:56 UTC 2023: + apt-get update
Fri Jul 21 01:55:58 UTC 2023: + return 0
Fri Jul 21 01:55:58 UTC 2023: + retry apt-get -y -q install git
Fri Jul 21 01:55:58 UTC 2023: + for i in {1…3}
Fri Jul 21 01:55:58 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 01:55:58 UTC 2023: + apt-get -y -q install git
Fri Jul 21 01:55:59 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 21 01:55:59 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 21 01:55:59 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 21 01:55:59 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 21 01:55:59 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Fri Jul 21 01:55:59 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 21 01:55:59 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 21 01:56:09 UTC 2023: + return 0
Fri Jul 21 01:56:09 UTC 2023: + mkdir -p /tmp/gocache
Fri Jul 21 01:56:09 UTC 2023: + export GOCACHE=/tmp/gocache
Fri Jul 21 01:56:09 UTC 2023: + GOCACHE=/tmp/gocache
Fri Jul 21 01:56:09 UTC 2023: + ‘[’ master = master ‘]’
Fri Jul 21 01:56:09 UTC 2023: + retry apt-get -y -q install gcc
Fri Jul 21 01:56:09 UTC 2023: + for i in {1…3}
Fri Jul 21 01:56:09 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 01:56:09 UTC 2023: + apt-get -y -q install gcc
Fri Jul 21 01:56:10 UTC 2023: debconf: unable to initialize frontend: Dialog
Fri Jul 21 01:56:10 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Fri Jul 21 01:56:10 UTC 2023: debconf: falling back to frontend: Readline
Fri Jul 21 01:56:10 UTC 2023: debconf: unable to initialize frontend: Readline
Fri Jul 21 01:56:10 UTC 2023: debconf: (This frontend requires a controlling tty.)
Fri Jul 21 01:56:10 UTC 2023: debconf: falling back to frontend: Teletype
Fri Jul 21 01:56:10 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Fri Jul 21 01:56:45 UTC 2023: + return 0
Fri Jul 21 01:56:45 UTC 2023: + mkdir -p /tmp/bin
Fri Jul 21 01:56:45 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 21 01:56:45 UTC 2023: + for i in {1…3}
Fri Jul 21 01:56:45 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 01:56:45 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Fri Jul 21 01:56:45 UTC 2023: + return 0
Fri Jul 21 01:56:45 UTC 2023: + chmod +x /tmp/bin/gimme
Fri Jul 21 01:56:45 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 21 01:56:45 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Fri Jul 21 01:56:45 UTC 2023: + retry gimme_retrier
Fri Jul 21 01:56:45 UTC 2023: + for i in {1…3}
Fri Jul 21 01:56:45 UTC 2023: + ‘[’ 1 == 1 ‘]’
Fri Jul 21 01:56:45 UTC 2023: + gimme_retrier
Fri Jul 21 01:56:45 UTC 2023: ++ gimme master
Fri Jul 21 01:57:37 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 01:57:37 UTC 2023: (using download type ‘auto’)
Fri Jul 21 01:57:37 UTC 2023: + eval ‘’
Fri Jul 21 01:57:37 UTC 2023: + which go
Fri Jul 21 01:57:37 UTC 2023: + for i in {1…3}
Fri Jul 21 01:57:37 UTC 2023: + ‘[’ 2 == 1 ‘]’
Fri Jul 21 01:57:37 UTC 2023: + sleep 10
Fri Jul 21 01:57:47 UTC 2023: + gimme_retrier
Fri Jul 21 01:57:47 UTC 2023: ++ gimme master
Fri Jul 21 01:57:48 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 01:57:48 UTC 2023: (using download type ‘auto’)
Fri Jul 21 01:57:48 UTC 2023: + eval ‘’
Fri Jul 21 01:57:48 UTC 2023: + which go
Fri Jul 21 01:57:48 UTC 2023: + for i in {1…3}
Fri Jul 21 01:57:48 UTC 2023: + ‘[’ 3 == 1 ‘]’
Fri Jul 21 01:57:48 UTC 2023: + sleep 10
Fri Jul 21 01:57:58 UTC 2023: + gimme_retrier
Fri Jul 21 01:57:58 UTC 2023: ++ gimme master
Fri Jul 21 01:57:59 UTC 2023: I don’t have any idea what to do with ‘master’.
Fri Jul 21 01:57:59 UTC 2023: (using download type ‘auto’)
Fri Jul 21 01:57:59 UTC 2023: + eval ‘’
Fri Jul 21 01:57:59 UTC 2023: + which go
Fri Jul 21 01:57:59 UTC 2023: + return 1
Fri Jul 21 01:57:59 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Fri Jul 21 01:57:59 UTC 2023: failed to set up or run the benchmark
Fri Jul 21 01:57:59 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 21, 2023

commit: 32597f2c69f0f13f300a63e28146688319562342 buildURL: Build Status, Sponge status: failed

Test output
    proftest.go:481: Serial port output for profiler-test-gomaster-2023-07-20-16-22-41-648725-pdt:
        \033[2J\033[01;01H\033[=3h\033[2J\033[01;01H\033[2J\033[01;01H\033[=3h\033[2J\033[01;01HBdsDxe: loading Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
        BdsDxe: starting Boot0001 "UEFI Google PersistentDisk " from PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)

    UEFI: Attempting to start image.
    Description: UEFI Google PersistentDisk 
    FilePath: PciRoot(0x0)/Pci(0x3,0x0)/Scsi(0x1,0x0)
    OptionNumber: 1.
    
    \033[0m\033[30m\033[47mWelcome to GRUB!



\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m\033[0m\033[30m\033[40m\033[2J\033[01;01H\033[0m\033[37m\033[40m  Booting `Debian GNU/Linux’


Loading Linux 5.10.0-23-cloud-amd64 …


Loading initial ramdisk …


error: no suitable video mode found.


Booting in blind mode


Thu Jul 20 23:23:05 UTC 2023: + retry apt-get update
Thu Jul 20 23:23:05 UTC 2023: + for i in {1…3}
Thu Jul 20 23:23:05 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 23:23:05 UTC 2023: + apt-get update
Thu Jul 20 23:23:07 UTC 2023: + return 0
Thu Jul 20 23:23:07 UTC 2023: + retry apt-get -y -q install git
Thu Jul 20 23:23:07 UTC 2023: + for i in {1…3}
Thu Jul 20 23:23:07 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 23:23:07 UTC 2023: + apt-get -y -q install git
Thu Jul 20 23:23:08 UTC 2023: debconf: unable to initialize frontend: Dialog
Thu Jul 20 23:23:08 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Thu Jul 20 23:23:08 UTC 2023: debconf: falling back to frontend: Readline
Thu Jul 20 23:23:08 UTC 2023: debconf: unable to initialize frontend: Readline
Thu Jul 20 23:23:08 UTC 2023: debconf: (Can’t locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.32.1 /usr/local/share/perl/5.32.1 /usr/lib/x86_64-linux-gnu/perl5/5.32 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl-base /usr/lib/x86_64-linux-gnu/perl/5.32 /usr/share/perl/5.32 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 8.)
Thu Jul 20 23:23:08 UTC 2023: debconf: falling back to frontend: Teletype
Thu Jul 20 23:23:08 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Thu Jul 20 23:23:17 UTC 2023: + return 0
Thu Jul 20 23:23:17 UTC 2023: + mkdir -p /tmp/gocache
Thu Jul 20 23:23:17 UTC 2023: + export GOCACHE=/tmp/gocache
Thu Jul 20 23:23:17 UTC 2023: + GOCACHE=/tmp/gocache
Thu Jul 20 23:23:17 UTC 2023: + ‘[’ master = master ‘]’
Thu Jul 20 23:23:17 UTC 2023: + retry apt-get -y -q install gcc
Thu Jul 20 23:23:17 UTC 2023: + for i in {1…3}
Thu Jul 20 23:23:17 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 23:23:17 UTC 2023: + apt-get -y -q install gcc
Thu Jul 20 23:23:18 UTC 2023: debconf: unable to initialize frontend: Dialog
Thu Jul 20 23:23:18 UTC 2023: debconf: (TERM is not set, so the dialog frontend is not usable.)
Thu Jul 20 23:23:18 UTC 2023: debconf: falling back to frontend: Readline
Thu Jul 20 23:23:18 UTC 2023: debconf: unable to initialize frontend: Readline
Thu Jul 20 23:23:18 UTC 2023: debconf: (This frontend requires a controlling tty.)
Thu Jul 20 23:23:18 UTC 2023: debconf: falling back to frontend: Teletype
Thu Jul 20 23:23:18 UTC 2023: dpkg-preconfigure: unable to re-open stdin:
Thu Jul 20 23:23:53 UTC 2023: + return 0
Thu Jul 20 23:23:53 UTC 2023: + mkdir -p /tmp/bin
Thu Jul 20 23:23:53 UTC 2023: + retry curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Thu Jul 20 23:23:53 UTC 2023: + for i in {1…3}
Thu Jul 20 23:23:53 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 23:23:53 UTC 2023: + curl -sL -o /tmp/bin/gimme https://raw.githubusercontent.com/travis-ci/gimme/master/gimme
Thu Jul 20 23:23:53 UTC 2023: + return 0
Thu Jul 20 23:23:53 UTC 2023: + chmod +x /tmp/bin/gimme
Thu Jul 20 23:23:53 UTC 2023: + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Thu Jul 20 23:23:53 UTC 2023: + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/tmp/bin
Thu Jul 20 23:23:53 UTC 2023: + retry gimme_retrier
Thu Jul 20 23:23:53 UTC 2023: + for i in {1…3}
Thu Jul 20 23:23:53 UTC 2023: + ‘[’ 1 == 1 ‘]’
Thu Jul 20 23:23:53 UTC 2023: + gimme_retrier
Thu Jul 20 23:23:53 UTC 2023: ++ gimme master
Thu Jul 20 23:24:44 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 23:24:44 UTC 2023: (using download type ‘auto’)
Thu Jul 20 23:24:44 UTC 2023: + eval ‘’
Thu Jul 20 23:24:44 UTC 2023: + which go
Thu Jul 20 23:24:44 UTC 2023: + for i in {1…3}
Thu Jul 20 23:24:44 UTC 2023: + ‘[’ 2 == 1 ‘]’
Thu Jul 20 23:24:44 UTC 2023: + sleep 10
Thu Jul 20 23:24:54 UTC 2023: + gimme_retrier
Thu Jul 20 23:24:54 UTC 2023: ++ gimme master
Thu Jul 20 23:24:55 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 23:24:55 UTC 2023: (using download type ‘auto’)
Thu Jul 20 23:24:55 UTC 2023: + eval ‘’
Thu Jul 20 23:24:55 UTC 2023: + which go
Thu Jul 20 23:24:55 UTC 2023: + for i in {1…3}
Thu Jul 20 23:24:55 UTC 2023: + ‘[’ 3 == 1 ‘]’
Thu Jul 20 23:24:55 UTC 2023: + sleep 10
Thu Jul 20 23:25:05 UTC 2023: + gimme_retrier
Thu Jul 20 23:25:05 UTC 2023: ++ gimme master
Thu Jul 20 23:25:06 UTC 2023: I don’t have any idea what to do with ‘master’.
Thu Jul 20 23:25:06 UTC 2023: (using download type ‘auto’)
Thu Jul 20 23:25:06 UTC 2023: + eval ‘’
Thu Jul 20 23:25:06 UTC 2023: + which go
Thu Jul 20 23:25:06 UTC 2023: + return 1
Thu Jul 20 23:25:06 UTC 2023: ++ echo ‘failed to set up or run the benchmark’
Thu Jul 20 23:25:06 UTC 2023: failed to set up or run the benchmark
Thu Jul 20 23:25:06 UTC 2023: ++ sleep 300
integration_test.go:364: PollAndLogSerialPort() got error: failed to execute the prober benchmark script

+1
flaky-bot[bot] on Jul 21, 2023
Read more comments on GitHub
← google-cloud-go: Method not found: google.pubsub.v1.Subscriber/StreamingPull
google-cloud-go: pubsub client does not work inside a docker container →