esp-idf: [TW#24179] Fail to connect wpa2 peap

Environment

• Development Kit: ESP32-bit
• IDF version f198339e
• Development Env: Make
• Operating System: Ubuntu
• Power Supply: USB

Problem Description

Fail to connect wpa2 peap

Expected Behavior

Connect succeful

Actual Behavior

Fail to connect

Steps to repropduce

1. download esp-idf
2. copy wps example
3. make menuconfig and set username and password
4. make flash monitor

Code to reproduce this issue

#define EXAMPLE_WIFI_SSID CONFIG_WIFI_SSID
#define EXAMPLE_EAP_METHOD CONFIG_EAP_METHOD

#define EXAMPLE_EAP_ID CONFIG_EAP_ID
#define EXAMPLE_EAP_USERNAME CONFIG_EAP_USERNAME
#define EXAMPLE_EAP_PASSWORD CONFIG_EAP_PASSWORD


/* Constants that aren't configurable in menuconfig */
/* FreeRTOS event group to signal when we are connected & ready to make a request */
static EventGroupHandle_t wifi_event_group;

/* The event group allows multiple bits for each event,
   but we only care about one event - are we connected
   to the AP with an IP? */
const int CONNECTED_BIT = BIT0;

/* Constants that aren't configurable in menuconfig */
#define EAP_PEAP 1
#define EAP_TTLS 2

static const char *TAG = "example";

/* CA cert, taken from wpa2_ca.pem
   Client cert, taken from wpa2_client.crt
   Client key, taken from wpa2_client.key

   The PEM, CRT and KEY file were provided by the person or organization
   who configured the AP with wpa2 enterprise.

   To embed it in the app binary, the PEM, CRT and KEY file is named
   in the component.mk COMPONENT_EMBED_TXTFILES variable.
*/
extern uint8_t ca_pem_start[] asm("_binary_wpa2_ca_pem_start");
extern uint8_t ca_pem_end[]   asm("_binary_wpa2_ca_pem_end");
extern uint8_t client_crt_start[] asm("_binary_wpa2_client_crt_start");
extern uint8_t client_crt_end[]   asm("_binary_wpa2_client_crt_end");
extern uint8_t client_key_start[] asm("_binary_wpa2_client_key_start");
extern uint8_t client_key_end[]   asm("_binary_wpa2_client_key_end");

static esp_err_t event_handler(void *ctx, system_event_t *event)
{
    switch(event->event_id) {
    case SYSTEM_EVENT_STA_START:
        esp_wifi_connect();
        break;
    case SYSTEM_EVENT_STA_GOT_IP:
        xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
        break;
    case SYSTEM_EVENT_STA_DISCONNECTED:
        esp_wifi_connect();
        xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
        break;
    default:
        break;
    }
    return ESP_OK;
}

static void initialise_wifi(void)
{
    unsigned int ca_pem_bytes = ca_pem_end - ca_pem_start;
    unsigned int client_crt_bytes = client_crt_end - client_crt_start;
    unsigned int client_key_bytes = client_key_end - client_key_start;
    esp_wpa2_config_t config = WPA2_CONFIG_INIT_DEFAULT();

    tcpip_adapter_init();
    wifi_event_group = xEventGroupCreate();
    ESP_ERROR_CHECK( esp_event_loop_init(event_handler, NULL) );
    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
    //ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
    wifi_config_t wifi_config = {
        .sta = {
            .ssid = EXAMPLE_WIFI_SSID,
        },
    };

    tcpip_adapter_dhcps_stop(TCPIP_ADAPTER_IF_AP);

    tcpip_adapter_ip_info_t ip_info;
    IP4_ADDR(&ip_info.ip,10,21,123,142);
    IP4_ADDR(&ip_info.gw,10,21,122,1);
    IP4_ADDR(&ip_info.netmask,255,255,254,0);
    ip_addr_t dnsserver;
	
    inet_pton(AF_INET, "10.21.71.19", &dnsserver);
		dns_setserver(0, &dnsserver);
		
    printf("set ip ret: %d\n", tcpip_adapter_set_ip_info(TCPIP_ADAPTER_IF_AP, &ip_info)); //set static IP

    //tcpip_adapter_dhcps_start(TCPIP_ADAPTER_IF_AP);


    ESP_LOGI(TAG, "Setting WiFi configuration SSID %s...", wifi_config.sta.ssid);
    ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
    ESP_ERROR_CHECK( esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
    /*
    ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_set_ca_cert(ca_pem_start, ca_pem_bytes) );
    ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_set_cert_key(client_crt_start, client_crt_bytes,\
    		client_key_start, client_key_bytes, NULL, 0) );
   
    */
    ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_set_identity((uint8_t *)EXAMPLE_EAP_ID, strlen(EXAMPLE_EAP_ID)) );
    if (EXAMPLE_EAP_METHOD == EAP_PEAP || EXAMPLE_EAP_METHOD == EAP_TTLS) {
        ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_set_username((uint8_t *)EXAMPLE_EAP_USERNAME, strlen(EXAMPLE_EAP_USERNAME)) );
        ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_set_password((uint8_t *)EXAMPLE_EAP_PASSWORD, strlen(EXAMPLE_EAP_PASSWORD)) );
    }
   
    ESP_ERROR_CHECK( esp_wifi_sta_wpa2_ent_enable(&config) );
    ESP_ERROR_CHECK( esp_wifi_start() );
}

static void wpa2_enterprise_example_task(void *pvParameters)
{
    tcpip_adapter_ip_info_t ip;
    memset(&ip, 0, sizeof(tcpip_adapter_ip_info_t));
    vTaskDelay(2000 / portTICK_PERIOD_MS);


            const struct addrinfo hints = {
                    .ai_family = AF_INET,
                    .ai_socktype = SOCK_STREAM,
                };
                struct addrinfo *res;
                struct in_addr *addr;
                int s, r;
                char recv_buf[64];

    while (1) {
        vTaskDelay(2000 / portTICK_PERIOD_MS);

        if (tcpip_adapter_get_ip_info(ESP_IF_WIFI_STA, &ip) == 0) {
            ESP_LOGI(TAG, "~~~~~~~~~~~");
            ESP_LOGI(TAG, "IP:"IPSTR, IP2STR(&ip.ip));
            ESP_LOGI(TAG, "MASK:"IPSTR, IP2STR(&ip.netmask));
            ESP_LOGI(TAG, "GW:"IPSTR, IP2STR(&ip.gw));
            ESP_LOGI(TAG, "~~~~~~~~~~~");
            

        }
    }
}

void app_main()
{
    ESP_ERROR_CHECK( nvs_flash_init() );
    initialise_wifi();
    xTaskCreate(&wpa2_enterprise_example_task, "wpa2_enterprise_example_task", 4096, NULL, 5, NULL);

}

Debug Logs

V (718) event: exit default callback I (838) wifi: n:1 0, o:1 0, ap:255 255, sta:1 0, prof:1 I (1818) wifi: state: init -> auth (b0) I (1818) wifi: state: auth -> assoc (0) I (1838) wifi: state: assoc -> run (10) I (1838) wpa: wpa2_task prio:2, stack:6656

D (3028) wpa: TLS: using phase1 config options D (3038) wpa: SSL: Received packet(len=6) - Flags 0x21 D (3038) wpa: EAP-PEAP: Start (server ver=1, own ver=1) D (3038) wpa: EAP-PEAP: Using PEAP version 1 D (3038) wpa: TLSv1: Send ClientHello D (3048) wpa: SSL: 62 bytes left to be sent out (of total 62 bytes) I (4698) example: ~~~~~~~~~~~ I (4698) example: IP:0.0.0.0 I (4698) example: MASK:0.0.0.0 I (4698) example: GW:0.0.0.0 I (4698) example: ~~~~~~~~~~~ D (4798) wpa: SSL: Received packet(len=1000) - Flags 0xc1 D (4798) wpa: SSL: TLS Message Length: 1248 I (4798) wpa: SSL: Need 258 bytes more input data D (4798) wpa: SSL: Building ACK (type=25 id=4 ver=1)

D (4818) wpa: SSL: Received packet(len=264) - Flags 0x01 D (4818) wpa: TLSv1: Received content type 22 version 3.1 length 74 D (4818) wpa: TLSv1: Received ServerHello D (4818) wpa: TLSv1: Using TLS v1.0 D (4828) wpa: TLSv1: Selected cipher suite: 0x002f D (4828) wpa: TLSv1: Received content type 22 version 3.1 length 1155 D (4838) wpa: TLSv1: Received Certificate (certificate_list len 1151) D (4848) wpa: TLSv1: Certificate 0 (len 1145) D (4848) wpa: X509: Version X.509v3 D (4848) wpa: X509: serialNumber ### D (4858) wpa: X509: issuer ?=Cisco Systems, ?=Cisco Manufacturing CA D (4858) wpa: X509: Validity: notBefore: 0 notAfter: 0 D (4868) wpa: X509: subject ?=US, ?=California, ?=San Jose, ?=Cisco Systems, ?=AIR-CT5508-K9-649ef3bf2d00/emailAddress=support@cisco.com D (4878) wpa: X509: Extension: extnID=2.5.29.15 critical=0 D (4888) wpa: X509: KeyUsage 0x5 D (4888) wpa: X509: Extension: extnID=2.5.29.14 critical=0 D (4898) wpa: X509: Extension: extnID=2.5.29.35 critical=0 D (4898) wpa: X509: Extension: extnID=2.5.29.31 critical=0 D (4908) wpa: X509: Extension: extnID=1.3.6.1.5.5.7.1.1 critical=0 D (4908) wpa: X509: Extension: extnID=1.3.6.1.4.1.311.20.2 critical=0 D (4918) wpa: X509: Version X.509v3 D (4918) wpa: X509: serialNumber ### D (4928) wpa: X509: issuer ?=Cisco Systems, ?=Cisco Manufacturing CA D (4928) wpa: X509: Validity: notBefore: 0 notAfter: 0 D (4938) wpa: X509: subject ?=US, ?=California, ?=San Jose, ?=Cisco Systems, ?=AIR-CT5508-K9-649ef3bf2d00/emailAddress=support@cisco.com D (4948) wpa: X509: Extension: extnID=2.5.29.15 critical=0 D (4958) wpa: X509: KeyUsage 0x5 D (4958) wpa: X509: Extension: extnID=2.5.29.14 critical=0 D (4968) wpa: X509: Extension: extnID=2.5.29.35 critical=0 D (4968) wpa: X509: Extension: extnID=2.5.29.31 critical=0 D (4978) wpa: X509: Extension: extnID=1.3.6.1.5.5.7.1.1 critical=0 D (4978) wpa: X509: Extension: extnID=1.3.6.1.4.1.311.20.2 critical=0 D (4988) wpa: X509: Validate certificate chain D (4988) wpa: X509: 0: ?=US, ?=California, ?=San Jose, ?=Cisco Systems, ?=AIR-CT5508-K9-649ef3bf2d00/emailAddress=support@cisco.com D (5008) wpa: X509: Did not find any of the issuers from the list of trusted certificates D (5008) wpa: X509: Certificate chain validation disabled - ignore unknown CA issue D (5018) wpa: X509: Certificate chain valid D (5028) wpa: TLSv1: Received content type 22 version 3.1 length 4 D (5028) wpa: TLSv1: Received ServerHelloDone D (5038) wpa: TLSv1: Send ClientKeyExchange D (5218) wpa: TLSv1: Send ChangeCipherSpec D (5218) wpa: TLSv1: Record Layer - New write cipher suite 0x002f D (5218) wpa: TLSv1: Send Finished D (5218) wpa: SSL: 326 bytes left to be sent out (of total 326 bytes) D (5338) wpa: SSL: Received packet(len=17) - Flags 0x81 D (5338) wpa: SSL: TLS Message Length: 7 D (5338) wpa: TLSv1: Received content type 21 version 3.1 length 2 D (5348) wpa: TLSv1: Received alert 2:20 D (5348) wpa: SSL: No data to be sent out D (5358) wpa: SSL: Building ACK (type=25 id=6 ver=1)

I (5368) wpa: >>>>>wpa2 FIALED

D (5368) wpa: TLSv1: Selected cipher suite: 0x0000 D (5368) wpa: TLSv1: Record Layer - New write cipher suite 0x0000 D (5378) wpa: TLSv1: Record Layer - New read cipher suite 0x0000

I (5388) wpa: wpa2 task delete

## sdkconfig
```cpp

#
# Automatically generated file; DO NOT EDIT.
# Espressif IoT Development Framework Configuration
#

#
# SDK tool configuration
#
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_PYTHON="python"
CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y

#
# Bootloader config
#
CONFIG_LOG_BOOTLOADER_LEVEL_NONE=
CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=
CONFIG_LOG_BOOTLOADER_LEVEL_WARN=
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG=
CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE=
CONFIG_LOG_BOOTLOADER_LEVEL=3
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V=
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
CONFIG_BOOTLOADER_FACTORY_RESET=
CONFIG_BOOTLOADER_APP_TEST=

#
# Security features
#
CONFIG_SECURE_BOOT_ENABLED=
CONFIG_FLASH_ENCRYPTION_ENABLED=

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0"
CONFIG_ESPTOOLPY_BAUD_115200B=y
CONFIG_ESPTOOLPY_BAUD_230400B=
CONFIG_ESPTOOLPY_BAUD_921600B=
CONFIG_ESPTOOLPY_BAUD_2MB=
CONFIG_ESPTOOLPY_BAUD_OTHER=
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_BAUD=115200
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_FLASHMODE_QIO=
CONFIG_FLASHMODE_QOUT=
CONFIG_FLASHMODE_DIO=y
CONFIG_FLASHMODE_DOUT=
CONFIG_ESPTOOLPY_FLASHMODE="dio"
CONFIG_ESPTOOLPY_FLASHFREQ_80M=
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
CONFIG_ESPTOOLPY_FLASHFREQ_26M=
CONFIG_ESPTOOLPY_FLASHFREQ_20M=
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
CONFIG_ESPTOOLPY_FLASHSIZE_1MB=
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
CONFIG_ESPTOOLPY_FLASHSIZE_8MB=
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
CONFIG_ESPTOOLPY_BEFORE_NORESET=
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
CONFIG_ESPTOOLPY_AFTER_NORESET=
CONFIG_ESPTOOLPY_AFTER="hard_reset"
CONFIG_MONITOR_BAUD_9600B=
CONFIG_MONITOR_BAUD_57600B=
CONFIG_MONITOR_BAUD_115200B=y
CONFIG_MONITOR_BAUD_230400B=
CONFIG_MONITOR_BAUD_921600B=
CONFIG_MONITOR_BAUD_2MB=
CONFIG_MONITOR_BAUD_OTHER=
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200

#
# Example Configuration
#
CONFIG_WIFI_SSID="###"
CONFIG_EAP_METHOD=1
CONFIG_EAP_ID="###"
CONFIG_EAP_USERNAME="##"
CONFIG_EAP_PASSWORD="###"

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
CONFIG_PARTITION_TABLE_TWO_OTA=
CONFIG_PARTITION_TABLE_CUSTOM=
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y

#
# Compiler options
#
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
CONFIG_OPTIMIZATION_LEVEL_RELEASE=
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=
CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=
CONFIG_CXX_EXCEPTIONS=
CONFIG_STACK_CHECK_NONE=y
CONFIG_STACK_CHECK_NORM=
CONFIG_STACK_CHECK_STRONG=
CONFIG_STACK_CHECK_ALL=
CONFIG_STACK_CHECK=
CONFIG_WARN_WRITE_STRINGS=

#
# Component config
#

#
# Application Level Tracing
#
CONFIG_ESP32_APPTRACE_DEST_TRAX=
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_ENABLE=
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_AWS_IOT_SDK=

#
# Bluetooth
#
CONFIG_BT_ENABLED=
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BT_RESERVE_DRAM=0

#
# Driver configurations
#

#
# ADC configuration
#
CONFIG_ADC_FORCE_XPD_FSM=
CONFIG_ADC2_DISABLE_DAC=y

#
# SPI master configuration
#
CONFIG_SPI_MASTER_IN_IRAM=
CONFIG_SPI_MASTER_ISR_IN_IRAM=y

#
# ESP32-specific
#
CONFIG_ESP32_DEFAULT_CPU_FREQ_80=
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_SPIRAM_SUPPORT=
CONFIG_MEMMAP_TRACEMEM=
CONFIG_MEMMAP_TRACEMEM_TWOBANKS=
CONFIG_ESP32_TRAX=
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH=
CONFIG_ESP32_ENABLE_COREDUMP_TO_UART=
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_ESP32_ENABLE_COREDUMP=
CONFIG_TWO_UNIVERSAL_MAC_ADDRESS=
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=3584
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF=
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR=
CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF=
CONFIG_NEWLIB_STDIN_LINE_ENDING_LF=
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
CONFIG_NEWLIB_NANO_FORMAT=
CONFIG_CONSOLE_UART_DEFAULT=y
CONFIG_CONSOLE_UART_CUSTOM=
CONFIG_CONSOLE_UART_NONE=
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_ULP_COPROC_ENABLED=
CONFIG_ULP_COPROC_RESERVE_MEM=0
CONFIG_ESP32_PANIC_PRINT_HALT=
CONFIG_ESP32_PANIC_PRINT_REBOOT=y
CONFIG_ESP32_PANIC_SILENT_REBOOT=
CONFIG_ESP32_PANIC_GDBSTUB=
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_DEBUG_STUBS_ENABLE=y
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
CONFIG_TASK_WDT_PANIC=
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
CONFIG_BROWNOUT_DET_LVL_SEL_1=
CONFIG_BROWNOUT_DET_LVL_SEL_2=
CONFIG_BROWNOUT_DET_LVL_SEL_3=
CONFIG_BROWNOUT_DET_LVL_SEL_4=
CONFIG_BROWNOUT_DET_LVL_SEL_5=
CONFIG_BROWNOUT_DET_LVL_SEL_6=
CONFIG_BROWNOUT_DET_LVL_SEL_7=
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC=
CONFIG_ESP32_TIME_SYSCALL_USE_FRC1=
CONFIG_ESP32_TIME_SYSCALL_USE_NONE=
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL=
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
CONFIG_ESP32_XTAL_FREQ_26=
CONFIG_ESP32_XTAL_FREQ_AUTO=
CONFIG_ESP32_XTAL_FREQ=40
CONFIG_DISABLE_BASIC_ROM_CONSOLE=
CONFIG_NO_BLOBS=
CONFIG_ESP_TIMER_PROFILING=
CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS=
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y

#
# Wi-Fi
#
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_CSI_ENABLED=
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1=

#
# PHY
#
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION=
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20

#
# Power Management
#
CONFIG_PM_ENABLE=

#
# ADC-Calibration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y

#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y

#
# Ethernet
#
CONFIG_DMA_RX_BUF_NUM=10
CONFIG_DMA_TX_BUF_NUM=10
CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=
CONFIG_EMAC_TASK_PRIORITY=20

#
# FAT Filesystem support
#
CONFIG_FATFS_CODEPAGE_DYNAMIC=
CONFIG_FATFS_CODEPAGE_437=y
CONFIG_FATFS_CODEPAGE_720=
CONFIG_FATFS_CODEPAGE_737=
CONFIG_FATFS_CODEPAGE_771=
CONFIG_FATFS_CODEPAGE_775=
CONFIG_FATFS_CODEPAGE_850=
CONFIG_FATFS_CODEPAGE_852=
CONFIG_FATFS_CODEPAGE_855=
CONFIG_FATFS_CODEPAGE_857=
CONFIG_FATFS_CODEPAGE_860=
CONFIG_FATFS_CODEPAGE_861=
CONFIG_FATFS_CODEPAGE_862=
CONFIG_FATFS_CODEPAGE_863=
CONFIG_FATFS_CODEPAGE_864=
CONFIG_FATFS_CODEPAGE_865=
CONFIG_FATFS_CODEPAGE_866=
CONFIG_FATFS_CODEPAGE_869=
CONFIG_FATFS_CODEPAGE_932=
CONFIG_FATFS_CODEPAGE_936=
CONFIG_FATFS_CODEPAGE_949=
CONFIG_FATFS_CODEPAGE_950=
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
CONFIG_FATFS_LFN_HEAP=
CONFIG_FATFS_LFN_STACK=
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y

#
# FreeRTOS
#
CONFIG_FREERTOS_UNICORE=
CONFIG_FREERTOS_CORETIMER_0=y
CONFIG_FREERTOS_CORETIMER_1=
CONFIG_FREERTOS_HZ=100
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE=
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL=
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE=
CONFIG_FREERTOS_ASSERT_DISABLE=
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
CONFIG_FREERTOS_LEGACY_HOOKS=
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_SUPPORT_STATIC_ALLOCATION=
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
CONFIG_FREERTOS_USE_TRACE_FACILITY=
CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=
CONFIG_FREERTOS_DEBUG_INTERNALS=

#
# Heap memory debugging
#
CONFIG_HEAP_POISONING_DISABLED=y
CONFIG_HEAP_POISONING_LIGHT=
CONFIG_HEAP_POISONING_COMPREHENSIVE=
CONFIG_HEAP_TRACING=

#
# libsodium
#
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y

#
# Log output
#
CONFIG_LOG_DEFAULT_LEVEL_NONE=
CONFIG_LOG_DEFAULT_LEVEL_ERROR=
CONFIG_LOG_DEFAULT_LEVEL_WARN=
CONFIG_LOG_DEFAULT_LEVEL_INFO=
CONFIG_LOG_DEFAULT_LEVEL_DEBUG=
CONFIG_LOG_DEFAULT_LEVEL_VERBOSE=y
CONFIG_LOG_DEFAULT_LEVEL=5
CONFIG_LOG_COLORS=y

#
# LWIP
#
CONFIG_L2_TO_L3_COPY=
CONFIG_LWIP_IRAM_OPTIMIZATION=
CONFIG_LWIP_MAX_SOCKETS=10
CONFIG_USE_ONLY_LWIP_SELECT=
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_IP_FRAG=
CONFIG_LWIP_IP_REASSEMBLY=
CONFIG_LWIP_STATS=
CONFIG_LWIP_ETHARP_TRUST_IP_MAC=y
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y

#
# DHCP server
#
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
CONFIG_LWIP_AUTOIP=
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8

#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES=
CONFIG_TCP_OVERSIZE_MSS=y
CONFIG_TCP_OVERSIZE_QUARTER_MSS=
CONFIG_TCP_OVERSIZE_DISABLE=

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=2560
CONFIG_PPP_SUPPORT=

#
# ICMP
#
CONFIG_LWIP_MULTICAST_PING=
CONFIG_LWIP_BROADCAST_PING=

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16

#
# mbedTLS
#
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
CONFIG_MBEDTLS_DEBUG=
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_HARDWARE_MPI=
CONFIG_MBEDTLS_HARDWARE_SHA=
CONFIG_MBEDTLS_HAVE_TIME=y
CONFIG_MBEDTLS_HAVE_TIME_DATE=
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
CONFIG_MBEDTLS_TLS_SERVER_ONLY=
CONFIG_MBEDTLS_TLS_CLIENT_ONLY=
CONFIG_MBEDTLS_TLS_DISABLED=
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
CONFIG_MBEDTLS_SSL_PROTO_SSL3=
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
CONFIG_MBEDTLS_SSL_PROTO_DTLS=
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_SSL_SESSION_TICKETS=y

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CAMELLIA_C=
CONFIG_MBEDTLS_DES_C=
CONFIG_MBEDTLS_RC4_DISABLED=y
CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT=
CONFIG_MBEDTLS_RC4_ENABLED=
CONFIG_MBEDTLS_BLOWFISH_C=
CONFIG_MBEDTLS_XTEA_C=
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
CONFIG_MBEDTLS_RIPEMD160_C=

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y

#
# OpenSSL
#
CONFIG_OPENSSL_DEBUG=
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
CONFIG_OPENSSL_ASSERT_EXIT=

#
# PThreads
#
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072

#
# SPI Flash driver
#
CONFIG_SPI_FLASH_VERIFY_WRITE=
CONFIG_SPI_FLASH_ENABLE_COUNTERS=
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS=
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED=

#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3

#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
CONFIG_SPIFFS_CACHE_STATS=
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
CONFIG_SPIFFS_GC_STATS=
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y

#
# Debug Configuration
#
CONFIG_SPIFFS_DBG=
CONFIG_SPIFFS_API_DBG=
CONFIG_SPIFFS_GC_DBG=
CONFIG_SPIFFS_CACHE_DBG=
CONFIG_SPIFFS_CHECK_DBG=
CONFIG_SPIFFS_TEST_VISUALISATION=

#
# tcpip adapter
#
CONFIG_IP_LOST_TIMER_INTERVAL=120

#
# Virtual file system
#
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y

#
# Wear Levelling
#
CONFIG_WL_SECTOR_SIZE_512=
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096