deconz-rest-plugin: Stopped working after update to Hyper Worm

Describe the bug

After updating to Hyper Worm (2.05.84) and updating firmware to 26660700, deCONZ stopped working with following error in log: device disconnected reason: 5, index: 0

Steps to reproduce the behavior

Expected behavior

Screenshots

Environment

  • Host system: PC
  • Running method: Ubuntu / Marthoc Docker container
  • Firmware version: (26660700)
  • deCONZ version: (2.05.84)
  • Device: ConBee II
  • Do you use an USB extension cable: yes

deCONZ Logs

atropos@server:~$ sudo deCONZ --dbg-error=2 --dbg-info=1 -platform minimal
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
libpng warning: iCCP: known incorrect sRGB profile
13:14:41:403 HTTP Server listen on address 0.0.0.0, port: 8080 error: The bound address is already in use
13:14:41:403 HTTP Server listen on address 0.0.0.0, port: 80 error: The bound address is already in use
13:14:41:403 HTTP Server listen on address 0.0.0.0, port: 8080 error: The bound address is already in use
13:14:41:403 HTTP Server listen on address 0.0.0.0, port: 8090, root: /usr/share/deCONZ/webapp/
13:14:41:435 CTRL. 3.31.113:14:41:486 ZCLDB init file /root/.local/share/dresden-elektronik/deCONZ/zcldb.txt
13:14:41:560 parent process sudo
13:14:41:560 gw run mode: normal
13:14:41:561 GW sd-card image version file does not exist: /root/.local/share/dresden-elektronik/deCONZ/gw-version
13:14:41:562 DB sqlite version 3.31.1
13:14:41:563 DB PRAGMA page_count: 33
13:14:41:563 DB PRAGMA page_size: 4096
13:14:41:563 DB PRAGMA freelist_count: 0
13:14:41:563 DB file size 135168 bytes, free pages 0
13:14:41:563 DB PRAGMA user_version: 7
13:14:41:563 DB cleanup
13:14:41:564 DB create temporary views
13:14:41:570 started websocket server at port 20877
13:14:41:572 [INFO] - Found file containing button maps. Parsing data...
13:14:41:576 [INFO] - Button maps loaded.
13:14:41:577 dlg action: Read binding table
13:14:41:577 found node plugin: libde_rest_plugin.so - REST API Plugin
13:14:41:578 found node plugin: libde_signal_plugin.so - Signal Monitor Plugin
13:14:41:578 Otau image path does not exist: /root/otau
13:14:41:583 found node plugin: libstd_otau_plugin.so - STD OTAU Plugin
This plugin does not support propagateSizeHints()
This plugin does not support propagateSizeHints()
13:14:42:633 UPNP socket not bound, state: 0
13:14:42:638 COM check bootloader
13:14:42:648
R21B18 Bootloader
13:14:44:647 COM check bootloader
13:14:44:657 Vers: 2.07
13:14:44:657 build: Jun 17 2019
13:14:44:657 , 08:48:53
13:14:44:678
R21B18 Bootloader
13:14:44:679 Vers: 2.07
13:14:44:679 build: Jun 17 2019
13:14:44:679 , 08:48:53
13:14:46:656 COM check bootloader
13:14:46:667
R21B18 Bootloader
13:14:46:667 Vers: 2.07
13:14:46:668 build: Jun 17 2019
13:14:46:668 , 08:48:53
13:14:46:732 GW update firmware not found:
13:14:47:204 Announced to internet https://phoscon.de/discover
13:14:48:663 COM check bootloader
13:14:48:674
R21B18 Bootloader
13:14:48:675 Vers: 2.07
13:14:48:675 build: Jun 17 2019
13:14:50:671 COM check bootloader
13:14:50:682 , 08:48:53
13:14:50:703
R21B18 Bootloader
13:14:50:703 Vers: 2.07
13:14:50:703 build: Jun 17 2019
13:14:50:703 , 08:48:53
13:14:52:679 COM check bootloader
13:14:52:689
R21B18 Bootloader
13:14:54:686 COM check bootloader
13:14:54:696 Vers: 2.07
13:14:54:697 build: Jun 17 2019
13:14:54:697 , 08:48:53
13:14:54:738
R21B18 Bootloader
13:14:54:738 Vers: 2.07
13:14:54:738 build: Jun 17 2019
13:14:54:738 , 08:48:53
13:14:54:765 device disconnected reason: 5, index: 0
13:14:55:695 wait reconnect 15 seconds
13:14:56:695 wait reconnect 14 seconds
13:14:56:722 GW update firmware found: /usr/share/deCONZ/firmware/deCONZ_ConBeeII_0x26660700.bin.GCF
13:14:57:695 wait reconnect 13 seconds
13:14:58:695 wait reconnect 12 seconds
13:14:59:695 wait reconnect 11 seconds
13:15:00:695 wait reconnect 10 seconds
13:15:01:695 wait reconnect 9 seconds
13:15:01:695 start reconnect to network
13:15:02:696 wait reconnect 8 seconds
13:15:03:695 wait reconnect 7 seconds
13:15:04:695 wait reconnect 6 seconds
13:15:05:695 wait reconnect 5 seconds
^C13:15:05:820 shutdown after signal(2)
13:15:05:852 saved node state in 0 ms
13:15:05:875 sync() in 23 ms
13:15:05:876 REST API plugin shutting down
13:15:05:920 sync() in 19 ms

Additional context

Updated firmware to 26660700 using update script from marthoc/deconz documentation Updated deconz container to latest marthoc/deconz Downgrading firmware/software doesn’t help (also tried manual upgrade) Unplugging and replugging stick doesn’t help

About this issue

  • Original URL
  • State: closed
  • Created 4 years ago
  • Comments: 16 (6 by maintainers)

Most upvoted comments

I can confirm this issue. I have updated over my Ubuntu PC and connected the Conbee stick back to my NAS but deconz in Docker could not connect to the stick. Downgrading to 26580700 solved the problem.

+3
DenisLug on Nov 1, 2020

I’m also in the same predicament, updated firmware through deconz add-on via HA, and now getting not connected and same logs above…

and can also confirm downgrading to deCONZ_ConBeeII_0x26580700.bin.GCF resolved all issues, and I have been taken off life support

+2
warwickofthegh on Oct 25, 2020

I’m facing the same error.

Setup: RPi, HA, deCONZ add-on (2.05.84 / 14.09.2020), ConBee II. I’ve updated to the newest firmware deCONZ_ConBeeII_0x26660700.bin.GCF using Windows machine. But was unable to connect to Conbee II via deCONZ on Windows and RPi (event after multiple tries). Only once I was able to connect to Conbee on Windows but wasn’t working on RPi. Then after another firmware update it’s not working till now.

I tried to downgrade to deCONZ_ConBeeII_0x26650700.bin.GCF but no change.

Loading backup file didn’t downgrade to the previously working firmware.

R21B18 Bootloader
23:23:07:311 Vers: 2.07
23:23:07:311 build: Jun 17 2019
23:23:07:311 , 08:48:53
23:23:07:314 device disconnected reason: 5, index: 0
23:23:08:200 failed to reconnect to network try=9
23:23:08:200 wait reconnect 15 seconds
23:23:08:296 dev /dev/ttyAMA0
23:23:08:296 COM: /dev/ttyACM0 / serialno: XXX
23:23:08:296 COM: --dev: /dev/ttyACM0 (ConBee II)
23:23:09:195 wait reconnect 14 seconds
23:23:10:195 wait reconnect 13 seconds
23:23:11:195 wait reconnect 12 seconds
23:23:12:195 wait reconnect 11 seconds
23:23:13:195 failed to reconnect to network try=10
23:23:13:195 wait reconnect 10 seconds
23:23:14:195 wait reconnect 9 seconds
23:23:15:195 wait reconnect 8 seconds
23:23:15:243 dev /dev/ttyAMA0
23:23:16:195 wait reconnect 7 seconds
23:23:17:195 wait reconnect 6 seconds
23:23:18:195 reconnect network failed, try later
23:23:18:195 wait reconnect 5 seconds
23:23:18:195 start reconnect to network
23:23:19:195 wait reconnect 4 seconds
23:23:20:195 wait reconnect 3 seconds
23:23:21:195 wait reconnect 2 seconds
23:23:22:195 wait reconnect 1 seconds
23:23:22:241 dev /dev/ttyAMA0
23:23:22:241 COM: /dev/ttyACM0 / serialno: XXX
23:23:22:241 COM: --dev: /dev/ttyACM0 (ConBee II)
23:23:22:256 COM check bootloader
23:23:22:268 
R21B18 Bootloader
23:23:22:268 Vers: 2.07
23:23:22:268 build: Jun 17 2019
23:23:22:268 , 08:48:53
23:23:22:316 dev /dev/ttyAMA0
23:23:23:195 failed to reconnect to network try=1
23:23:24:258 COM check bootloader
23:23:24:269 
R21B18 Bootloader
23:23:24:269 Vers: 2.07
23:23:24:270 build: Jun 17 2019
23:23:24:270 , 08:48:53
23:23:25:242 dev /dev/ttyAMA0
23:23:26:263 COM check bootloader
23:23:26:276 
R21B18 Bootloader
23:23:26:276 Vers: 2.07
23:23:26:276 build: Jun 17 2019
23:23:26:276 , 08:48:53
23:23:28:195 failed to reconnect to network try=2
23:23:28:274 COM check bootloader
23:23:28:287 
R21B18 Bootloader
23:23:28:287 Vers: 2.07
23:23:28:287 build: Jun 17 2019

9 hours later update: I’ve downgraded firmware to deCONZ_ConBeeII_0x26580700.bin.GCF and it works properly. So broken firmware versions are:

  • ConBeeII_0x26650700
  • ConBeeII_0x26660700
+2
VivantSenior on Oct 22, 2020

One more case here. Updated to 26660700 from deCONZ (Home Assistant plugin). Now I get the same output as @VivantSenior. Will try to downgrade this afternoon.

Edit: I can confirm, downgrading to deCONZ_ConBeeII_0x26580700 works perfectly!

+1
patrickhilker on Nov 2, 2020

I don’t think it’s the firmware version since it doesn’t seem that deCONZ is connected to it, it appears the update didn’t work and the bootloader is rotating.

sudo GCFFlasher_internal -x 3 -t 60 -d /dev/ttyACM0 -f deCONZ_ConBeeII_0x26660700.bin.GCF

Can you please try to update the firmware with this command and the -x 3 parameter, it should verify and print the new firmware version at the end.

Note on Windows the command is slightly different as described here: https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Update-deCONZ-manually

+1
manup on Oct 22, 2020
Read more comments on GitHub
← deconz-rest-plugin: Smart things Multipurpose sensor - incorrect temp being shown
deconz-rest-plugin: Symfonisk controller broken in v2.8.0 →