hahomematic: HM-ES-PMSw1-Pl state wrong after CCU reboot

DONT’T DELETE THIS. Please answer all questions as good as possible.

Make sure you have read the documentation at https://github.com/danielperna84/custom_homematic#custom_homematic.

Make sure you are running the latest version of hahomematic or it’s custom_component (and Home Assistant) before reporting an issue.

custom_component/hahomematic version (if applicable): 1.10.0

Home Assistant version (if applicable): 2022.7.0

CCU version:

• Model (CCU2/3, Raspi3/4, NUC, ProxmoxVE, …): Raspi 3
• OS (Original, RaspberryMatic, debmatic/…): RaspberryMatic
• Version: 3.63.9.20220625

Problem-relevant configuration:

Do you use tls? Do you use callback? Do you use username and password? Which interfaces do you use?

Describe the bug

Hello there! When I restart my “CCU”, more specifically my RaspberryMatic RPi3, all HM-ES-PMSw1-Pl in my Home are shown as Off, even though they are physically turned On.

I can confirm that the device is turned On on the CCU device status webpage:

Here is the strange part: Accessing this page (without any further action) also triggers the update of known state in Home Assistant:

This might also be the cause for other issues. Would be great if you could look into this!! Thanks

To Reproduce Steps to reproduce the behavior:

1. Turn On a HM-ES-PMSw1-Pl
2. Reboot the CCU
3. Check the device state as described above

Screenshots (if applicable)

• see above

Relevant HA log entries (full log)

Diagnostic Information (available on every device)

Expected behavior Correct state at every given point.

Additional context .