cypress: Cypress stuck at cy.visit() on saucedemo.com

Current behavior

I have experienced the following issue before and reported it here #27185 but the website in question was really problematic and the discussion went anywhere but to the point.

I am now experiencing it in the most simple webapp possible: saucedemo.com

The error is this

Your page did not fire its load event within 60000ms

It seems to work is some cases, but I’ll provide instructions on how to reproduce it consistently.

Desired behavior

Cypress should not get stuck at cy.visit()

Test code to reproduce

Run both tests in this repo headed (npx cypress run --headed), or open the suite and run the tests. https://github.com/esbarila/crowdar/tree/master

Cypress Version

12.17.3

Node version

18.16.0

Operating System

Linux (tried in Ubuntu 22.10 and Linux Mint 21)

Debug Logs

CypressError: Timed out after waiting `60000ms` for your remote page to load.

Your page did not fire its `load` event within `60000ms`.

Other

No response

About this issue

  • Original URL
  • State: open
  • Created 3 years ago
  • Reactions: 18
  • Comments: 49 (9 by maintainers)

Most upvoted comments

I was facing this issue. My solution was cypress->developer tools -> View Appdata. here I deleted the “production” folder closed cypress and open it again

cypress 12.17.4 node v20.5.0

Any update on this issue?

Hi, I was having the same issue (Chrome) and my solution was : cypress.config added chromeWebSecurity: false

const { defineConfig } = require('cypress')

module.exports = defineConfig({

  chromeWebSecurity: false // add this line
})

Cypress v13.6.4

Solution: https://github.com/cypress-io/cypress/issues/19826 cc: @cachafla

I can confirm this is happening in the example repo provided. There are a couple ways I’m able to reproduce the issue show below where the AUT url is not displaying even though the AUT itself appears to have loaded:

cy.visit() error

I can trigger this when running the following command:

npx cypress run --headed

Note: this only appears to happen in electron

I can also trigger it in open mode using the following command:

npx cypress open

Note: this appears to happen in every browser

I fixed the problem with this code:

  e2e: {
    // Configure your E2E tests here
    specPattern: "cypress/e2e/**/*.{cy,spec}.{js,ts}",
    watchForFileChanges: false,
    chromeWebSecurity: false,
    blockHosts: ["https://events.backtrace.io"],
  }

As you can see, the sauce demo site has this broke url that always respond with a HTTP 401 status, so i block then and my sample project works fine now. Solution tested in Chrome and Firefox.

Cypress: 13.13.2

image

The trick is: open the Cypress Runner, find some broken URLs, and block them all. Be careful, you have superpowers now

I have the same issue and none of those workarounds worked for me ;[ the funny thing is that:

  • it started 2 weeks ago without any changes on our end
  • the first test runs fine, the problem is with all subsequent tests

Having the same issue with latest cypress 13.6.2 The tests with Chrome 120, stucks at visit command

Hello everybody, I’ve noticed that while I unregister service worker (using pwa in nuxt) everything works. So with this founding I used

beforeEach(() => {
  if (!window.navigator || !navigator.serviceWorker) {
    return null;
  }
  const cypressPromise = new Cypress.Promise((resolve, reject) => {
    navigator.serviceWorker.getRegistrations().then((registrations) => {
      if(!registrations.length) resolve();
      Promise.all(registrations).then(() => {
        resolve();
      });
    });
  });
  cy.wrap('Unregister service workers').then(() => cypressPromise)
});

and my tests seems to work, hope that will help you all 😃

This issue is mentioned on https://filiphric.com/how-to-wait-for-page-to-load-in-cypress together with a resolution:

image

I was not able to get this to work, but perhaps this hint may help in some way?

Same issue here, first test passes but the subsequent tests are facing :
“Your page did not fire its load event within 60000ms.” Even though my page seems to have loaded. Headed or not does not fix the issue. The tests were running fine before, nothing has changed on my end.

Cypress 13.6.2

I’m getting the same issue after setting up vite-pwa on a Vue application. Removing the file provided by @renzho7 fixed it on the GUI, but it still failed headlessly… currently the only way I got it to work was by deleting the service worker

 cy.visit('/', {
    onBeforeLoad(win) {
      delete win.navigator.__proto__.serviceWorker;
    },
  }); 

In my case, I discovered resources (JS and Images) that:

  • Or they didn’t load (various errors)
  • Or it was not needed for the tests

To resolve this, I added the blockHosts configuration to the cypress.config.js file (example below):

blockHosts: [ "www.googletagmanager.com", "analytics.google.com", "www.google-analytics.com" ],

And it started working normally.

Cypress 13.13.0 Linux Any browser (including electron).

There was a bug with Chromium https://issues.chromium.org/issues/347724924

Updating to the latest version (126.0.6478.127) solved the issue for me.

I was facing this issue. My solution was cypress->developer tools -> View Appdata. here I deleted the “production” folder closed cypress and open it again

cypress 12.17.4 node v20.5.0

tks!!!

Having the same issue with latest cypress 13.6.2 The tests with Chrome 120, stucks at visit command

I have the same issue and none of those workarounds worked for me ;[ the funny thing is that:

  • it started 2 weeks ago without any changes on our end
  • the first test runs fine, the problem is with all subsequent tests

I have this same issue and it only happens on Chrome 120 headlessly (headed works fine)

Chrome 118 the exact same test passes fine headless and headed

I was facing this issue. My solution was cypress->developer tools -> View Appdata. here I deleted the “production” folder closed cypress and open it again

cypress 12.17.4 node v20.5.0

Thank you @renzho7! After removing the production folder it worked for me for the only one test run and I had to remove it every time and rerun cypress. Thanks for your answer I decided to figure out where exactly in that folder is the problem. So I’ve finally found that you just need to delete this folder: ~/Library/Application Support/Cypress/cy/production/browsers/chrome-stable/interactive/Default/Service Worker/CacheStorage. After removing this folder saucedemo visit constantly works.

The path and the result is here: https://youtu.be/AdcBb6CAofs cc: @MikeMcC399

The tests hang at the visit command when the spec file contains more than one test. This issue occurs on Chrome, Firefox, and Electron, and persists across different Cypress versions, both older and latest.

  1. Chrome
  • Name: chrome
  • Channel: stable
  • Version: 130.0.6723.70
  1. Firefox
  • Name: firefox
  • Channel: stable
  • Version: 131.0.3

Cypress Version: 13.15.1 (stable) System Platform: darwin (23.5.0)

@GilbertoGNG Great news! We are facing same issue, and we applied 2 temporary solutions:

beforeEach(() => {
  cy.wrap(
    Cypress.automation('remote:debugger:protocol', {
      command: 'Network.clearBrowserCache',
    })
  );
// OR
  cy.window().then((win) => {
    return win.navigator.cookieEnabled;
  });
  cy.document().then((doc) => {
    if (typeof doc.hasStorageAccess === 'function') {
      return doc.hasStorageAccess();
    } else {
      // Return a resolved promise with true if hasStorageAccess is not supported
      return Cypress.Promise.resolve(true);
    }
  });
});

if you have images try to stub them like this before calling cy.visit(“/”)

cy.intercept("GET", "**/*.{png,jpg,jpeg,gif}", req => {
	req.reply({
		statusCode: 200,
		body: "",
		headers: {
		      "Content-Type": "image/png",
		     },
		})
}).as("stubImages")

Same issue here. The problem with mine was some third party scripts or images wasn’t able to fully load on the page correctly. Make sure you check the browser requests to detect those. After remove/prevent those resources being load, all the tests are working fine.

How do you prevent some resources not to load like some scripts not to load or stylesheets?

Use environment variable is an option. Set TEST_ENV = true flag for the CYPRESS run, and use it to control if we want a script to load or not in code.

I had this issue with Cypress 13.6.6 (latest) and the Electron browser. The first test is working, but some subsequent tests are failing, similar to what @TiltUp-Rad described in https://github.com/cypress-io/cypress/issues/27501#issuecomment-1810392987

In my case (which no doubt is different from many of the other cases described above) I think what happens is this:

  1. The first (successful) test visits /a which is loaded into Electron just fine. The browser JS application then fetches /b based on (Cypress simulated) user interaction; this also works fine. Apparently the /b response is stored in some kind of cache by Electron or otherwise remembered.
  2. The second (unsuccesful) test visits /b, which Electron loads from its cache(?), but the load event is never triggered, so the operation times out after 60 seconds.

There is no problem visiting /c in the second test, because it hasn’t been cached by Electron. The second test can also visit /b?foo=bar just fine. It’s only when the exact same URL visited in the second test has already been fetched in the first test that the cy.visit gets stuck.

Using --browser chrome works around the problem so this appears to be specific to Electron (but in limited testing, similar problems happen with Firefox as well).

This may be a niche situation, but I think it sheds light on the caching behavior of Electron, which could be the underlying reason for at least some of the problems reported here.

Having the same issue with latest cypress 13.6.2 The tests with Chrome 120 stucks at visit command

the first one runs but all below fail, any work around guys?

I was facing this issue. My solution was cypress->developer tools -> View Appdata. here I deleted the “production” folder closed cypress and open it again cypress 12.17.4 node v20.5.0

Thank you @renzho7! After removing the production folder it worked for me for the only one test run and I had to remove it every time and rerun cypress. Thanks for your answer I decided to figure out where exactly in that folder is the problem. So I’ve finally found that you just need to delete this folder: ~/Library/Application Support/Cypress/cy/production/browsers/chrome-stable/interactive/Default/Service Worker/CacheStorage. After removing this folder saucedemo visit constantly works.

The path and the result is here: https://youtu.be/AdcBb6CAofs cc: @MikeMcC399

This works just fine for me 😃 Thanks!

In our case the problem was caused by an external resource that had no route in our internal network, so it ran into a connection timeout which in turn used up the 60 seconds of the Cypress connection test before the actual tests gets executed.

So I am not sure if this is actually the problem described in this issue but I was able to debug it using the DEBUG env-variable to get extended debug information:

DEBUG="cypress:*" cypress ...

I hope this helps someone with the same issue.

@omartaghlabi

This issue is about the site https://www.saucedemo.com/ producing the error message

Timed out after waiting 60000ms for your remote page to load.

You have a different error message, so it would be better for you to open a different issue so that you can supply all the relevant details, including, for instance, which browser isn’t connecting.

@sumabala9

can you check and let me know if am doing anything mistake here

Sorry for any confusion! I was also not able to get the workaround to solve the problem. We need to wait for further feedback from the Cypress team.